Replacement of old and burnt E.I. and safety devices in Leprosy Hospital at Kandwari in Tehsil Baijnath Distt. Kangra (HP)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group C.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:-KEI,SCI/Havells/Plaza

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:-KEI,SCI/Havells/Plaza

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:-KEI,SCI/Havells/Plaza

2x2.5 Sq. mm.

2x6 Sq. mm.

2x16 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:-KEI,SCI/Havells/Plaza

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make:-KEI,SCI/Havells/Plaza

3x2.5 Sq. mm.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required. Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Make:- L&T/Legrand/Schneider.

6 Amp Single pole. Cat-A.

16 Amp Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- L&T/Legrand/Schneider.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- L&T/Legrand/Schneider.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make:- L&T/Legrand/Schneider.

Double door-8 way

Double door-12 way

Double door-16 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and coke for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- Make:-KEI,SCI/Havells/Plaza

Armoured cable 10 sq. mm (twin core)

Providing, Installation, testing and commissioning of ceiling fan with Dura fan step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Makes:- Bajaj (Ultima),C&G (Cool bridge), Usha(As per Usha Technix Plus 3 star.) or any other approved by Engineer-in-Charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing Emergency inverter type 9 Watt LED lamp on existing light point as complete in all respect.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make:-Usha/Bajaj/Crompton/Recold

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and fixing LED linear batten with polycarbonate diffuser compact structure luminaire with ingreess protection IP40, 40 watt (3957 lumen) 5700 K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

40 Watt LED Linear Batten

Wipro (Cat. No. LL24-541-XXX-65-XX), Philips, GE or any other approved by Engineer-in-Charge.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- Make:-Usha/Bajaj/Crompton/Recold

35 Liter capacity water heater (Cat-A)

Providing and fixing pendent light with pulley and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Pendent Light with pulley

Makes:- Decon (Cat No 19 CB), Usha (Tisva), Wipro, Jaquor or any other approved by Engineer-in-Charge.

Supplying and fixing of LED Street Light made of die cast aluminium housing of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

100 watt LED Street Light.

Makes:- Clair (Cat.No. CL100WSTN)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubical panel, making connections, etc. as required. Make:- L&T/Legrand/Schneider.

125 Amp. -16 KA

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 pole MCCB incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required. Make:- L&T/Legrand/Schneider.

Double door 12 way (MCCB +12+12+12) module.

Makes:- L&T (Cat No:- PHV312DYM) /Hager/ Legrand

Providing, Installation, testing and commissioning of wall mounted cabin fan 400mm complete with all accessories including making connections, testing etc. as required. Complete in all respect.

Makes:- Panasonic (Wall Fan Flora High Speed (400mm))/ Havells/ Bajaj or any other approved by Engineer-in-Charge.

pankaj saini