ELECTRICAL UTILITY SHIFTING AND OVER HEAD LINE CONVERSION FOR ALTERNATE ROUTE IN LIEU TO PHASE-II METRO LINE ALIGNMENT

Amount

Description of work

Supply ,Drawing of 11kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) with suitable Anchor clamp/dead clamp,suspension clamp,surge arrestor,TEE/straight through joint,termination joint,cable ties,spiral earthing set,earth connector,fitting cross arms,stainless steel strap and buckle etc using 11kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) including cutting and removing tree branches wherever necessary and conveyance of all materials from stacking place.at the site of work and testing & commissioning of Aerial bunch cable etc complete as required as per standards & specified in the specification of the below size 11 kV Ariel bunched cable XLPE insulated of size 3 x 150+ 1 x 120 sqmm with bare/insulated Messenger

Supply ,laying of 1.1kv Aerial bunch cable of size 3x95 + 1x70(Insulated messenger) with suitable Anchor clamp/dead clamp,suspension clamp,surge arrestor,TEE/straight through joint,termination joint,cable ties,spiral earthing set,earth connector,fitting cross arms,stainless steel strap and buckle etc using 1.1kv Aerial bunch cable of size 3x95 + 1x70(Insulated messenger) including cutting and removing tree branches wherever necessary and conveyance of all materials from stacking place.at the site of work of 1.1Kv Aeriel Bunched cable as per IS & specified in the specification of the below size. 1.1Kv Aeriel bunched cable XLPE insulated of size 3x95(For phase) + 1x70(insulated messenger nuetral) + 1x16(street light) sqmm.

Supply, Making testing & commissioning of complete Heat shrinkable type indoor/ outdoor type and end termination as specified in the specification including provision of laying,dressing, Tagging,Glanding with Lugs/ferrules for termination of 11kv HT XLPE insulated cable including making holes in the switch board, clamping supporting complete as required by utility owning agency following sizes and as per standards and directions of officers. Additional loop of cable should be made before end termination on the structure/Ground 11kv H S type 3x300 sqmm

Dismantling one LT PSC/RCC/RS Joists/TW pole,fittins,service connections etc including digging out and back filling pit .This also includes handling over of materials (if not relayed) to concerned utility agency.(including Transportation).Dismantling the existing street light fixtures with all accessories and erecting in nearest LT/HT poles as per KSEB standard and directions of officer

Dismantling one 11 kv A- pole/HT PSC/RCC/TW including accessories,fittings etc and This also includes handling over of dismantled cable (if not relayed) to concerned utility agency.(including Transportation)

Supply and erection at site HT/RSJ/PSC/RCC poles at site of required height including concrete foundation digging and back filling with fittings including x Arms and clamps / insulator,stay and including all materials cable loop In loop-out as per standard and direction of officers

Supply and erection one A-pole (painted MS) at site of required Height including excavation , concrete foundation and back filling , crossarms ,insulator,stay,earth leads and all materials as per KSEBL standards and direction of officers.

Providing Strut using LT pole including digging and back filling pit( taken from the dismantled items).

Dismantling and reconnecting S ph service connection required from the OH line incl..lower down the WP portion

Dismantling and reconnecting 3 ph service connection required from the OH line incl..lower down the WP portion

Redrawing 11kv ABC of size 3*150 +1*120 sq. mm with anchor clamp/dead clamp,suspension clamp, surge arrestor, T/Straight through joint, termination joint,cable ties,spiral earthing , earth connector, fitting cross arms, stainless steel strap and buckle etc as per standards and specifications and direction of officers.

Dismantling and re erecting (without damage) LT3 phase 4/5 wire OH line including stay,strut,cross arms,insulators, including Existing street light fixtures , accessories and all materials at nearest LT/HT/A pole as as per standards and directions of officers.

Dismantling and re erecting (without damage) HT lines(3 conductor) including stay,strut,cross arms,insulators including all materials at nearest HT/A pole as as per standards and directions of officers

VIJAYA ELE TECHS PRIVATE LTD.