MAINT AND REPAIR TO SEWAGE DISPOSAL SYSTEM AT K AREA AND SF ACCN SECT 28/29D UNDER GE CHANDIGARH

Amount

Cleaning / blockage of 'S' trap/'P' trap/WC's (Orissa Pattern/ European/Indian Type) /WHB / Urinal /floor trap /Gully trap,nahani trap in running/flowing order without disturbance by removal of blockage of any type by deploying sufficient Nos of Safaiwalas and making fully functional at any location and at any floor in the area covered by military station K area and sector 28/29D including all the T&P reuired for the purpose complete all as specified and directed by Engineer-in -Charge.

Cleaning of blockage sewage pipe line any bore/any type in running/flowing order without disturbance by removal of blockage of any type incl all T&P required by deploying sufficient Nos of Safaiwala and making fully functional at any location and at any floor in the area covered by military station K Area and sector 28/29D including all the T&P reuired for the purpose complete all as specified and directed by Engineer-in -Charge Note:-Note for Ser No 1 & 2: (a) The quantity of unclogging chemical as required will be measured and paid for seperately. (b) The contractor will provide suffiecient Safaiwalas per day for 08 Hrs to attend the above complaints for complete tenure of contract. The quoted rates of the contractor deemed to include the cost of aforesaid manpower. (c) All the safaiwalas employed by contractor shall attend the MES complaint cell of AGE B/R Army at military station K Area and sector 28/29D at 08:30 Hrs to collect the complaints from the concerned JE and submit the minor complaints duly signed by the occupant at 1630 Hrs same day and major complaints within the 24 Hrs of working day in the complaint cell. It will be responsibility of contractor to ensure their attendance & completion of complaints. If complaints not cleared by in specific time an penalty of Rs 500/- will be recover from the contractor per complaint. The contractor will ensure the cleaning/clearing of all the complaints (irrespective of Nos) within time by deploying addl workers if needed. Nothing extra will be paid on this account. (d) The contractor shall be solely responsible for supplying all the safety equipments and observing safety rules required by the safaiwalas during working Hrs as per Govt policies in vogue and as amended time to time. (e) All the waste material / sludge shall be disposed off outside MD land.

Dewatering/Desluding of sockage well/septic tank (any size and depth), by mechanical means or sucker desilting and removing sludge from manholes as in foul conditons and removing of sludge beyond MD land and deposited in borrow pits including excavation of borrow pits and covered with 10cm thick layers of soil complete all as specified and directed by Engr-in-Charge. Note :- Dewatering /desludging shall be done by suction pump / any mechanical means and disposal by truck mounted trailors ton disposal off sludge etc beyound MOD land earmaked by local Muncipal Corporation.

Dewatering/Desluding of manholes (any size and depth), desilting and removing sludge from manholes as in foul conditons including taking off manhole covers and re-fixing the same after cleaning and removing of sludge beyond MoD land and deposited in borrow pits including excavation of borrow pits and covered with 10cm thick layers of soil complete all as specified and directed. Note :- Dewatering /desludging shall be done by truck mounted trailors to dispose off sludge etc beyond MOD land marked by local Muncipal Corporation.

Cleaning of drain pipes of any size by rodding by mechanical means or sucker from manhole to manhole for cleaning eye and well flushing with water after cleaning .(The rate include for taking off manhole cover and re-fixing the same after cleaning /removing the waste materials and sludge to a distance near by suitable distance and depositing in the borrow pits as directed by Engineer-in-Charge. Note:The rates also include for earth work /excavation and removal of surplus spoil for borrow pits

Cleaning of CI pipes of any size laid in trenches including bends/junction/gully traps etc and removing of sludge if any to a distance exc 50 m and desposting as directed by at site complete all as specified and directed

Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement concrete un-reinforced as in Concrete of any description and in any position not otherwise specifically provided for complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition and taking down eaves gutter and AC/PVC/CI rain water pipe any size or pattern incl all fittings, heads, shoes, bends,Swan necks, etc including cleaning or refixing or removing to store (measured overall as fixed along centre line over fittings and accessories) complete ,all as specified and as directed by Engineer-in-Charge.

Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions arches, pillar or any other descrption etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in any type of soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc. not exceeding 10 sq. m on plan and getting out complete all as specified

All as per item No 14 but exc. 1.5m and n. exc. 3.00m in depth.

Plain cement concrete (1:4:8) type D-2,using 75 mm graded stone aggregate as in foundations, filling and mass concrete, sub base etc complete all as specified and directed by Engineer-in-Charge.

Precast cement concrete 1:1.5:3 type B-1 using 20mm graded mechanically crushed stone aggregate as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and the like and jointed all as specified in CM 1:6 complete all as specified and as directed. Note:- (i) The quoted rates shall deemed to include for providing two handles of MS round bars 12mm dia (ii) Reinforcement shall be measured & paid separately.

Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed with and including using necessary use and waste of formwork complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:3:6) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished) complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:4:8) type D-2,using 75 mm graded stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for 150mm RCC pipes class NP-2 conforming to IS laid in trenches and jointed in cement mortar 1:3 complete with collar inclding demolition and breaking up PCC and SGSW/RCC drain pipes of 150mm dia size jointed in cement mortar and taking out of trenches.

All as per item No 23 above but size 200mm dia.

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) bed to drain pipes including packing under & haunching & benching against the side of pipe after they are laid and tested in 150mm dia of RCC pipes complete all as specified.

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) bed to drain pipes including packing under & haunching & benching against the side of pipe after they are laid and tested in 200mm dia of pipe

Brick work with sub class 'B' bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class 'B' bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:4 EXCEPT BRICKS complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces in two layers mixed with water proofing compound on top layer, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound shall be measured and paid separately.

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing comound ISI Marked complete all as specified and directed.

TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint on walls over and including a coat of primer including preparation of surface complete all as specified and directed.

Supplying and fixing in repairs Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.

Supplying and fixing in repairs Vitreous China Wash down water closet (Pedestal pattern), complete white with integral footrest complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.

S&F in repairs salt glazed stoneware gully traps, 150x150mm square or round mouthed, type P complete all as specified.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore fixed in repair including jointing to waste pipe in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer in Charge.

First quality joint free Non - skid coloured Ceramic tiles 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement mortar over and inculding 15 mm thick screed in cement mortar (1:6) and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

Glazed ceramic coloured tiles 450 x 300 x 7mm thick on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.

Rubber coated Chequered cement concrete tiles 30mmx30mmx25mm thick with grey cement and pigment, over and including 15 mm thick screed in Cement mortar 1:6 set jointed and pointed in neat cement slurry in floors complete, all as specified and as directed by Engineer-in-Charge.

60mm thick machine pressed precast concrete ( M-35 grade) prepolished rubberized moulded interlocking paver block manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top, with grey cement and pigment(Yellow & red) any shape and size confirming to IS 15658-2006 laid over and including 50 mm thick cushion of coarse sand & filling the joints after laying complete all as specified and as directed.

Material and labour for factory made Precast RCC man hole covers (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 900mm x 750mm x 70mm with plain faces, including RCC ring / frame and MS frame, set in cement mortar 1:4 complete all as specified.

Material and labour for factory made Precast RCC man hole covers (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 900mm x 900mm x 70mm with plain faces, including RCC ring / frame and MS frame, set in cement mortar 1:4 complete all as specified.

M&L for Cutting into existing manholes for connecting 150 mm new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required , complete all as specified and directed.

110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and as directed.

75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and as directed.

110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) bends (any radius), for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) junction (Single T) equal or unequal for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) junction (Single T) equal or unequal for 110 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm bore complete all as specified and directed.

S&F Cast iron soil, spun pipes waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 100 mm bore complete all as specified and directed.

S&F Cast iron soil,spun pipes waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 75 mm bore complete all as specified and directed.

S&F Cast iron soil,spun pipes waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 100 mm bore complete all as specified and directed.

S&F Cast iron soil spun pipes waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 75 mm bore complete all as specified and directed.

S&F Cast iron in repair Bends (any radius), diminishing pieces or tapers (larger bore measured) 75 mm bore with ovel access door complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 100 mm bore complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 75mm bore complete all as specified and directed.

S&F Cast iron 100 mm bore junction single T equal or unequal with access door fixed in repair complete all as specified.

S&F Cast iron 75 mm bore junction single T equal or unequal with acess door fixed in repair complete all as specified.

S&F in repiar Cast iron 100/75 mm CI bend/tee acess door cap complete all as specified and directed.

His Construction Company (BID ID -3292146)

GURU NANAK CONSTRUCTION CO. (BID ID -3288265)

M/s Super Trading Corporation (BID ID -3292155)