ESTIMATE FOR SUPPLY AND ERECTION AND COMMISSIONING OF MINI MAST LIGHT AT VARIOUS PLACES IN WARD NO 11 MC SONIPAT

Amount

-PROVIDING AND FIXING OF CHEMICAL ELECTRODE PIPE USING SALT AND CHARCOAL/COKE FOR PIPE EARTH ELECTRODE 4.5 MTR LONG AND 40 MM DIA INCLUDING THE COST OF LABOUR AND MATERIAL REQUIRED TO COMPLETE THE JOB IN ALL RESPECT UPTO THE ENTIRE SATISFACTION OF ENGINEER-IN-CHARGE OF THE WORK.

-Casting, Laying and covering of Gap Base plate (Pole) between foundation suitable c.c mixture and pole marking with yellow reflector stricker with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

-S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the work

Supply & Erection 'Trudge M' LED mini high mast light in 300W with six angular bracket module each of 50w(as per drawing), homogeneus light distribution suitable for landscape area. Trudge M housing is made up of UV stablised Polyurethane Painted die cast aluminum housing, control gear plate , a protector made of opal or textured UV stablised PMMA . Every module is in angular shape and produce diffused light in 120 degree. fitting is with 8 mtr decorative pole as per attached drawing. Trudge M is completely weather protected and suitable for outdoor lighting application. Light is wired with Branded OSRAM or equivalent make LED and constant current driver. Proper thermal management for longer life of fixture. make VAK lighting VAK-PT-TUR-M-POST-300 or equivalent model of GLOWMAC,PHILLIPS,CROMPTON,JAQUAR,WIPRO

-Providing and Fixing of Fencing 1.20 m high fencing, with 1.65 m posts, placed at every, 2.5 m to 3 m apart embedded in cement concrete blocks and every tenth post, to be strutted, provided with 4 horizontal lines of G.I. barbed wire, weighing 9.34 kg. per 100 m (minimum) and fixed with GI staples, tied to 6 mm bar nib, with binding wire or by providing cut, including drilling holes, in the post complete (excluding the cost of posts, struts, earth work and concrete which is payable extra)including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.

-Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe inlucidng supply, Delivery of HDPE pipe at work site and alying of 50mm internal diameter HDPE pipe inside road for road corssing of cable by Hydraulic Drilling Device withoug opening of the road top surface, laid at a depth of at least 900mm belwo the orad surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laign of cables.

-Supply and erection of MS wire mesh Jall (welded) on MS angle iron frame duly welded on MS angle frame including the cost of primer coating and painting charge of MS jall and MS steel frame in all respect upto entire upto the entire satisfaction of Engineer - In - Charge of the work

-Casting and Laying of making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

Supply and Erection of 8W LED Spike light to highlight plants and bushes pressure die cast aluminium clear glass, high power LED and high quality opticallens with inbuilt LED driver with suitable foundation 1:1.5:3 for foundation of size 0.2 m x 0.2 m x 0.6 m for fixing the LED Spike light with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make - KayliteTrioscape- Spike, Glowmac, Crompton, Philips,Bajaj., VAK lighting

-Cost of RCC 1:1.5:3 for foundation of size 700x700x1500mm include base 1200x1200x300 with with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4nos 8 mm dia manufacturing from special steel along with nuts, washers, anchor plate & template all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.

-OPERATION AND MAINTANENCE FOR PARK LIGHT

SUPPLY AND ERECTION OF 10 WATT LED DECORATIVE VEGA BOLLARD IP65 IS MADE OF MS SECTION IN HEIGHT OF 1 MTR AND CASTINGS ARE IN ALUMINIUM. BASE IS MADE OF DIE CAST ALUMINIUM DIA IS 165MM. WITH HOLES SUITABLE FOR 10MM FOUNDATION BOLTS AS PER DRAWING. THE PRODUCT HAVE FULLY DUST AND RUBBER GASKETS ARE PROVIDED AT APPROPRIATE LOCATION FOR WATER RESISTANT. DIFFUSER IS MADE IN UNBREAKABLE PC MATERIAL WITH TITAN FINISH. COMPLETE BOLLARD IS AVAILABLE WITH MULTIPLE COATS OF WEATHER RESISTANT PU PAINT IN VARIOUS COLOURS WITH ALL LABOUR & MATERIAL REQUIRED TO COMPLETE THE JOB IN ALL RESPECT UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE. MAKE GLOWMAC, PHILLIPS, CROMPTON, VAK lighting

SUPPLY AND ERECTION OF DECORATIVE POLE 3 MTR LONG VEGA POLE INCLUDE 72 WATT LED LIGHTS MADE OUT OF MS SECTION WITH PC DIFFUSER AND CASTINGS IN ALLUMINIUM. LOWER SECTION OF THE POLE IS MADE OF MS PIPE DIA 150 MM AND HEIGHT 1 MTR WITH 3.2 MM THICKNESS MS CAST IRON BASE PLATE AND TOP SECTION MADE WITH PC DIFFUSER TUBE IN HEIGHT OF 2 MTR. DIFFUSER IS MADE IN UNBREAKABLE PC MATERIAL WITH TITA FINISH. RUBBER GASKETS ARE PROVIDED AT APPROPRIATE LOCATION FOR WATER RESISTANT (IP 65). VEGA POLE MADE IN 72W LED IP65 AND CPU PAINTED IN THREE LAYERS COATING IN WHICH IST LAYER WITH ETECH PRIMER, 2ND LAYER WITH PU PAINT COATING THICKNESS 85 MICRONS. ALSO USE DEPOXY ETECH PRIMER AND GREY PRIMER BEFORE PAINT COATING A OVAL MCB AND 3 CORE *0.75 SQ.MM FLEXIBLE ISI COOPER WIRES AT THE LOWER PART OF THE POLE WITH ALL LABOUR & MATERIAL REQUIRED TO COMPLETE THE JOB IN ALL RESPECT UPTO THE ENTIRE SATISFACTION OF ENGINEER-IN-CHIEF OF THE WORK. MAKE GLOWMAC, PHILLIPS, CROMPTON, VAK Lighting

-Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12''x15''x5'' Sintex/Semens make pvc insulated pole boxes of suitable size duly lockable including Input and Out Put Connectors Bakelite/Porclein of 63A Rating and neccessary service cable up to 10 mtr complete with internal copper wiring and installing the same on pole/pedestal with suitle means at hieght desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog 24 Hour Operation (G.E/L&T/Siemens/Indoasian/C&S) Contractor :- 3Pole 32A, 415Volt. (Schnider/L&T/Siemens/Indoasian/C&S), DPMCB :- 40A 2pole. (G.E/L&T/Siemens/Schnider/C&S)

Bidder Name

Amount

Mandeep Singh(GSTN-NA)

Sandeep(GSTN-NA)

Fortune Enterprises(GSTN-NA)

Fortune Enterprises

Mandeep Singh

Fortune Enterprises

Mandeep Singh