DESLUDGING, CLEANING AND REPAIR TO SEWAGE LINE/SOAKAGE WELL/SEPTIC TANKS AT PATTAN AND COMPREHENSIVE REPAIRS TO JOINERY, PANELLING, WALL LINNING AND REPAIRS TO JOINERY, PLUMBING, SANITARY FITTINGS AND CERTAIN B/R WKS AT BARAMULLA UNDER GE 969 EWS

Amount

Desludging of septic tanks and manholes any capacity, size and depth including disposal of waste water and sludge through mechanically/ Using honey sucker machine and dividely store in covered container etc complete and removing the sludge in covered van/trolly out side the defence land and taking off the manhole cover and placing in the same position after taking out sludge and covering pit with minimum 30 cm thick layer of earth work etc as outside MOD or any land outside MOD land which has approval of pollution control board,complete all as specified and as directed. NOTES :- The unit rate for desludging using Honey sucker Machine including hiring rate from any sources, Its operator, Hose required (at least 50 mtr) and Fuel etc. Per Trip of Truck shall deemed to include full capacity of Tank of the Truck i.e 3.0 to 4.5 Cum and the cost of dewatering shall also be included in the unit rate. The sludge will be poured into any STP outside the defence area. Contractor concern will liaise with the sources of Honey Sucker Machine and during working any defects raised contractor will be responsible in all respect, Complete all as specified and as directed.

Taking out silt, liquid water sludge in solid/semi solid sludge from septic tank/sump of any capacity, depth and size manually and removing the same to a distance of exc 250m but not exc 500 m including depositing the sludge, the sludge will be poured into any STP outside the defence area or any land outside MOD land which has approval of pollution control board and leaving the septic tank/sump clean etc complete all as specified and as directed.

M&L Cleaning of blockage of sewage lines, manholes of any dia & any depth in any situation by way of manual of cleaning of manholes sewage as well, as rodding to and fro, flushing with watering in sewage lines between successive manholes and keeping the systen functional connecting from floor traps, water closet, soil waste and vent pipes, gully traps upto final drop/outlet into septic tanks/central sewage system by removing all blockages of any description in any situations manually or mechanically including cleaning of blockage of vents/solid/waste RWP of any description and any dia at Pattan Garrison by employing daily one sweeper with helper along with required T&P with safety precaution, complete all as specified and as directed. "Salary of labour should not be less than minimum wages paid to labour as per labour law." Note:- (Sweeper and helper will report at complaint cell at 0900 hrs and submission of feedback at 1700 hrs)

Demolition of brickwork or stone masonary or block masonary etc built in cement mortar of any description including excavation and removal where ever required for embeded portion complete all as specified and as directed.

Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc from drain, walls and Manholes etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

All as per item No 8 above but except stones.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in copings etc including all necessary form works, complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 over stone wall surfaces and finished even & smooth without using extra cement, complete all as specified and as directed.

All as per item No 12 above but on brick or concrete surfaces, complete all as specified and as directed.

Demolition and breaking up drain pipe75/100 mm dia (AC,salt glazed, PVC or RCC pipes) set in CM or any description incl Excn of Earthwork , RFR, removal and making good, complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using (40mm graded stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after these are laid tested for 150 mm bore of pipes, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed complete using PVC solvent and necessary testing etc complete all as specified and as directed. Note : Pipe should not be less than 4 Kg/Cm2

M&L for 160 mm dia PVC (SWR) drain pipes laid in trenches and joined as specified, complete all as specified and as directed. Note : Pipe should not be less than 4 Kg/Cm2

M&L for 150mm bore of pipe Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for (150x100) mm Salt-glazed stoneware gully traps, square or found mouthed, Type P, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bends/Tee etc. Complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed complete using PVC solvent and necessary testing etc, complete all as specified and as directed. Note : Pipe should not be less than 4 Kg/Cm2

S&F of 75mm bore PVC (SWR) bends Tee/ junction etc fixing complete all as specified and as directed.

S&F of Setting in cement mortar 1:3 and flaunching with cement concrete 1:2:4 type B-I cast iron manhole covers and frames, medium duty, any type and size, complete all as specified and as directed.

Demolition of cement concrete reinforcement cut as required to facilitate demolition in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L precast RCC manholes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed.

Mild steel TMT bars 8mm dia, quality conforming to Grade 415 MPA cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and than 0.9mm dia concealed for securing with clips, complete all as specified and as directed.

M&L in repair for 10 User LLDPE septic tank (conventional) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent Shaft, connection etc, Complete all as specified and as directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in sub base after flooring complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base. complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed.

M & L for non skid coloured ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L Sand filling under floors or in foundations, including watering and consolidation, complete all as specified and as directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) .complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30 cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish off the permishes complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 450x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and including 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed.

M&L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of OBD complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering on walls over a coat of Chalk whiting, on plastered surfaces, complete all as specified and as directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall including L/U shape edge profile and base/support for fixing in wall surfaces complete all as specified and directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the ceiling including L/U shape edge profile and base/support for fixing complete all as specified and as directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L 6 mm thick Plywood on wall panelling, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L 6 mm thick Plywood in ceiling, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 6 & n.exc 13 Sqcm in section, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and as directed.

S&F 80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and directed.

All as per item No. 55 above but except sheeting removing and refixing in repair, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universal type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F Aluminium handles 100 mm , cast type, anodised complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type, anodised, complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F Softwood 2nd class Plan one side with butt joints eaves boards 20 mm thick . Complete all as specified and directed.

M&L 2nd class wood weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

S&F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting, complete all as specified and directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail complete all as specified.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling complete all as specified and as directed.

M&L for french polishing on surfaces of any descreption, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats, complete all as specified and as directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick fixed to timber frame work, complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.

M&L two coats of synthetic enamel paint including preparation of surface on old wooden sruface over 10 cm width or girth, complete all as specified and as directed.

Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings ,complete all as specified and as directed.

Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and directed.

Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrs complete all as specified and as directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated, complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F in repair stop valves fancy type chromium plated screwed down high presure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed.

S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and directed.

S&F in repairs vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed.

S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane including hacking out old brioken glass, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed.

S & F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc, complete all as specified and as directed.

S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and directed.

S&F in repairs Vitreous China Wall Hung coupled closet including cistern with lid dual flush fitting with PVC seat cover size not less than 665x360x765 mm (white) including fixing bolt complete all as specified Make-Johnsons or equivalent, complete all as specified and as directed.

S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified, Make Jaguar Cat-563, complete all as specified and as directed.

S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.

S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and as directed.

S & F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed, complete all as specified and as directed. Make Jaguar FLR-CHR- 5001B

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 75 mm dia. complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia fixed. complete all as specified and as directed.

S&F in repairs Single piece WC with UF soft closet, seat cover , hinges, fixing acessories including flushing cistern size (370x690x795mm) including S trap 300mm, including jet spray, complete all as specified and as directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed.

Note:- Schedule of credit Rs 82,005.00/- will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MS QADRI BUILDERS

M/S ALI MOHAMMAD GASSI

M/S GASSI BROTHERS

M/S ALTAF HUSSAIN KHUROO

Javeed And Co

M/S SHEIKH FEROOZ AHMAD

M/S A.M. ENTERPRISES

M/S Manzoor and Co

M/S GASSI CONSTRUCTION AND CO

M/S HAJI MOHD ASHRAF SUMJI

M/S ESS EMM ENTERPRISES