Annual Rate contract for Providing and fixing of Cat Eye,Sign Boards,delineators,Bollards etc.on various roads in East(Varachha)Zone -A.

NAME OF WORK : - Annual Rate contract for Providing and fixing of Cat Eye,Sign Boards, delineators,Bollards

etc. on Various Roads in East (Varachha) Zone -A.

SCHEDULE-B SOR-23-24

Item Description Qty. With outh Amount (Rs.) Remarks

Supplying of Molded Shank Raised Pavement Markers made of

polycarbonate and ABS molded body and eflective panels with micro

prismatic lens capable of providing total internal reflection of the light

entering the lens face and shall support a load of 16000 kg tested in

accordance to ASTM D 4280 Type H and complying to Specifications of

Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt

11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm

100 mm and with minimum reflective area of 13 Sqcm on each side and the

slope to the base shall be 35 +/- 5 degree. The strength of detachment of

the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm

and height not less than 30+/- 2 mm) from the body is to be a minimum

value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks

to go inside, without nails and using epoxy resin based adhesive as per

manufacturer’s recommendation and complete as directed by the

engineer. 3M or Equivalent Brand)

Solar Stud: Supplying of Solar Raised Pavement Markers made of

polycarbonate molded body with circular shape, solar powered, LED self

illumination in active mode, 360 degree illumination and reflective panels

with micro prismatic lens capable of providing total internal reflection of

the light entering the lens face in passive mode. The marker shall support a

load of 20000 kg tested in accordance to ASTM D 4280. The marker

should be resistant to dust and water ingress according to IP 65 standards

and should withstand temperatures in the range of 0 C to 70 C. Color of

2 lighting could be provided in red or yellow (amber) as per requirement and 40 2068.00 No.

typical frequency of blinking is 1 Hz. There should be current losses of less

than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life

of the marker and a full charge should provide for a minimum

autonomy of 50 hours. The height, width and length of the marker shall not

be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the

marker shall not be less than 100 mm respectively. The weight of the

marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the

road for the shanks to go inside, without nails and using epoxy resin based

Providing Supplying & Fixing jumbo swiss type traffic bollard made out of

1.5 mm thick CRC sheet in conical shape having 188cms, bottom dia 30cms,

top dia 22cms, with top circular direction plate of 30cms dia for arrow

fabricated as per attached drawing and coated with black epoxy powder

coating and Retro reflectorised three yellow strip 15cms wide and arrow

Micro Prismatic grade sheeting as per ASTM 4956-09 Type-XI

Fixing with cement concrete M-25 grade, Foundation size

30cm*30cm*35cm as per the instruction of Engineer in charge.

Providing Supplying and fixing post delineators made of ABS body fitted

with high reflective, reflectors and mounted on pipe of 50 to 70 mm dia

and height varying from 450 to 700 mm to be installed etc. completed as

per direction of Engineer-in- charge.(3M or Equivalent Brand)

Supply and Fixing of Flexible Median Marker (FMM) from a combination

oftough, high impact resistant engineering thermoplastic material with

Ushape structure having rebound/bounce*back property having

overallheight, width and body thickness not less than 181mm, 120mm, and

6.5mm respectively The flourscent yellow retro reflective sheeting meeting

ASTM D4956 Typ-XI specifications, in the FMM helps to highlight the

medians and increase the visibility during the night. The flexible Median

Marker should have integrated shank having depth of min 30mm and a dia

min 20mm fixed by drilling a hole on the kerb for the shanks to go inside,

without nails and using epoxy resin based adhesive as per manufacturer's

recommendation and complete as directed by engineer in charge.(3M or

Equivalent Brand)

Providing and laying cement concrete 1:1.5:3 (1 cement ; 1.5 sand ;

graded ston aggregate. 20 mm niminal size) finishing smooth curing etc.

6 comp. incld. Cost of formwork but excl. cost of reinforcement for 20 4146.15 C.M

reinforced concrete work in ; (A) Foundation, Footing, Base of

Columns and Mass Concrete

Regulatory / Mandatory Sign :- Providing and fixing sign boards made out

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size

cms. Dia Circle as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from

7 suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy 60 3540.12 No.

coatings in black and white bends. The details of symbol for each board

shall be as per the instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be submitted

(B) Class -B Type-4 Retro Reflective Sheeting

Cautionary Warning Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x

90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

8 from suitable size iron angle of 35 x 35 x3mm; painted with 40 3906.19 No.

bestquality epoxy coatings in black and white bends. The details of symbol

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting

Facility Informatory Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80x

cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from

9 suitable size iron angle of 35 x 35 x 3mm; painted with bestquality 60 3990.64 No.

epoxy coatings in black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original anufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

STOP Sign :-Providing and fixing sign boards made out of 2mmaluminium

sheet / 4mm ACP (Aluminum composite Panel); size 90 cms.Octagonal as

per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from

10 suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy 20 6637.98 No.

coatings in black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting.

PARKING SIGNS: Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size size 60 x

60cms. sequare plus 60 x 20cms rectangular additional plate as as per the

design of IRC-67- 2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Give Way Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x

cms. equilateral triangle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

12 suitable size iron angle of 35 x 35 x 3mm; painted with bestquality 40 3867.51 No.

epoxy coatings in black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting

Direction (Junction) Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size

244x122 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D- 4956 and

latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

13 from suitable size iron angle of 50x50x5mm; painted with 40 21287.51 No.

bestquality epoxy coatings in black and white bends. The details of symbol

for each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting.

Distance Informatory / Destination Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 180x120 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2

Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron angle of 50 x

50 x 5mm; painted with bestquality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

Providing and fixing retro reflective sheeting as per latest M.O.S.T./ MoRTH

15 Specifications as directed by the engineer.(3M or Equivalent 150 3593.58 Sq.Mt.

Providing and Fixing of powder coating red matt finished MS pipe bollards

made from 100mm O.D & 7.5mm thick M.S pipe having length of 1050mm,

3mm deep, 25mm wide groove covered by 25mm wide white

retro reflective strips hollow section shall be filled with cement concrete

foundation inclusive of excavation,fixing, refilling of excavated material,

grouting with cement concrete and anchar bar/ anchar fastner (hilti

orequivalent), removal of debris etc as shown in drawing and directed

byEngineer in charge. (Sample must be aproved.)

Signage Pole (Safety Bollard) for Junctions (M.S.Cylindrical pipe of

approved brands) of Size, 8 inch Dia, height-8feet. Wall thickness of pipe

3mm with base plate of 12mm M.S. base plate, round shape, cut 4 holes

on surface. M.s cleats welded with base plate & pole surface of 90 deg.

includes 4 nos. Bolts to fasten the pole & ground, with chemical filling.

work includees rectro reflective vinyl, Red/Blue & White High density, High

grade 3M or equivalent-Diamond grade Displaying: BRTS Letters with

Arrow & Bus logo on the middle Blue background with read & white band

type display on top & bottom as per the approved design. shall be installed

over flexible or rigid pavemen. As per instructions of engineer in charge.

(A) Information Board:- Retro reflective (Type-11) with ECF over lay

supported on Aluminum composite panel fixed on MS SHS 25mm x 25mm x

2.5mm (3mm Both Side) and supported on MS Angel 75mm x 75mm x 6mm

etc completed as instructed by engineer incharge

B) Only Retro reflective (Type-11) with ECF over lay supported onAluminum

composite panel fixed on (3mm Both Side) Existing Support etc completed 20 5832.20 No.

as instructed by engineer incharge

Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm

aluminium sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 1.8mtr long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from

19 suitable size iron angle of 35 x 35 x 3mm; painted with bestquality 15 3,483.85 Nos.

epoxy coatings in black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting

Supplying and fixing the necessary blinkers, delineators,trafic cones, etc as

per site requirement and as directed by engineer in charge

20 Delineators 50 850.00 Nos.

Traffic cones, Etc 30 423.00 Nos.

Blinkers 20 3850.00 Nos.

Providing and fixing Aluminium Composite Panel of Alum Decor, Indobond

& Flexibond make to all surfaces 4mm thick in required colours of exterior

consisting of two layers of aluminium skins of 0.25mm thick sandwich in a

thermo plastic core in continuous lamination process with PVDF coating of

exterior grades ensuring long life colour and fungal resistance. Base frame

21 work with aluminium sections shall be fixed over the all surfaces, ACP shall 20 1310.98 Sqmt.

be fixed to the frame work as cladding it includes cost of labour , materials,

accessories, adhesive, scaffolding, wastages, transport, taxes,

fixing into a neat finish in aesthetic point of view, without any undulations

in facias all complete as per instructions of the Engineer in charge.

Providing and sticking vinyl with eight colour eco solvent and epson

printing. The Vinyl shall be of 100 microns 3M media. The vinyl shall be

laminated by 80 microns film after the printing and before sticking. The

sample of the same shall be approved by the Engineer-in-charge and shall

be stuck in line and level without any crease or bubbles on the pre

laminated board / acrylic sheet using 3M adhesives surface. The graphics

shall be provided. The contractor shall check the graphic size and the

22 available surface before printing. The 3M vinyl signage shall be stuck firmly 20 754.32 Sqmt.

on 3mm thick SS 304L grade sheet as per designs. The sheet shall be firmly

fixed using SS 20mm dia studs as per the designs. The contractor shall

ensure that the signage sheets are fixed in correct line,

level and plumb. The rates shall be excluding SS sheet but including signage

material including fixing and other related costs like transportation,

electricity etc.

Providing, erecting and fixing in position structural steel sections of Yst

grade of TATA, Kamdhenu, Jindal of Asian confirming to IS:4923 purlins,

roof trusses, columns, side runners, ties, bracings, framing etc, including all

types of base plate, gusset plate, cap plate, bearing plate, stiffner, cleats

etc. complete and structural steel confirming to IS:226 including necessary

pipes, rolled joists, channels, angles, tees, MS flats, angle cleats, gusset

plate, bright bars, chequered plates, cross plates as per required thickness

including cutting, welding, riveting as per structural details and good

23 engineering practice grinding and cleaning the members as specified by 30 90.47 KG.

Engineer in charge. (only finished measurements shall be paid for billing

purpose). No extra payment shall be made for grouting that has to be done

under the base plate to get full bearing on supporting sub strata. The paint

shall be oil paint in three coats to get an even look over a

coat of red lead paint as per the instruction of the engineer-in-charge. The

rate shall also be inclusive of screws, bolts, nuts, washers, hinges, pivots

Providing and fixing retro Reflective Hi Intensity Micro prismatic Grade

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc.

24 complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Retro 25 7535.31 Sqmt.

reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B)Class B Type-4(MDR/ODR)

retro reflective sheeting

Executive Engineer

East (Varachha) Zone-A

Surat Municipal Corporation