Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-Finance DOOR NO 58 12 13 KARASA VISAKHAPATNAM 530009 | VISAKHAPATANAM | ANDHRA PRADESH | 530009 | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹29.8 L+₹3.2 L (12.0%)Rejected-Finance | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹29.8 L+₹3.2 L (12.1%)Rejected-Finance 14 3RD CROSS ASHWATHNAGAR RMV 2ND STAGE SANJAY NAGAR POST HEBBAL BANGALORE 560 094 | BENGALURU URBAN | KARNATAKA | 560094 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹32.5 L+₹5.9 L (22.3%)Rejected-Finance | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹34.8 L+₹8.3 L (31.1%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
17 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Nitesh Kumar Singh, IDSE AEE(Civ)
AGE (I) R and D, NSTL Complex, Visakhapatnam 530027
8493 INTERNAL PERIODICAL SERVICES TO CERTAIN BUILDINGS IN RESIDENTIAL AREA OF NSTL VISAKHAPATNAM
2023_MES_634504_1
AGE I R AND D NSTL VIZAG 8493
Open Tender
Civil Works
Item Rate
270 days
Visakhapatnam
Class D, Cat a(i)
7 documents required · 7 mandatory
₹500
AGE I R and D NSTL Visakhapatnam
₹76,000
Yes
7 Feb 2024
27 Dec 2023
19 Jan 2024
27 Dec 2023
17 Jan 2024
10 Jan 2024
Amount
M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a primer and necessary preparation of surfaces all as specified and directed.
M&L for preparation of old distempered surfaces of walls and cornices by washing, rubbing down and stopping of surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of previously untreated old painted steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over a red oxide primer complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description not other wise described n.exc10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of previously untreated old painted steel and iron surfaces of any description not other wise described n.exc10cm width or girth and applying two coat of synthetic enamel paint over a primer complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for complete removal of existing treatment on internal surfaces of walls, applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface and applying two coats of interior acrylic emulsion over a coat of interior primer complete all as specified.
Taking down cement plaster on brick work or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM (1:3) on ceiling of concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
Chipping of unsound/weak concrete material in patched n exc 10 Sqm for 15mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. complete with necessary scaffolding/ staging and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
Cleaning of reinforcement in pathes n exc 15RM from rust from the reinforcing bars of dia upto 12mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
M & L for mixing and applying SBR polymer modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) 15mm average thickness in three layers as per specifications and directions of Engineer-in-charge Note: Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30cm high complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.
M&L for vitrified tiles, double charged, first quality of size 600x600mm, 9 to 10mm thick as in Floors, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]
M&L for vitrified tiles, double charged, first quality for skirting cut from tiles of size 600x600mm, 9 to 10mm thick, to suit the size of floor tile, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)]
M&L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid and including 15mm thick screed bed in CM (1:4) complete all as specified.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc complete all as directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick hick walls, built in cement mortar (1:3) all as specified.
M&L rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick work in cement mortor 1:6 in pathches finishing the surfaces even & smooth
Demolition of cement concrete etc in any description/any location not exceeding 15 cm thickness.
M&L Slabs supported on walls, (Design M-25 20mm graded aggregates )beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed.
S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, ding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
M&L for 18-20mm thick Granite work of colour Ruby red/ Telephone black/ Jade black (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.
YEDLA SURESH NAIDU
M R CONSTRUCTIONS
M/s Sai Venkata Durga Constructions
Sri Venkateswara Constructions
B SRINIVAS
M/S SURENDRA ENGINEERING WORKS
RAVI VARMA JAMPANA
cevelworck
K R VARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .