SR Work of Door and window repairing, replacement of flooring, concertina coil over compound wall at Halvad police line and door & window repairing, chinamosaic at old police station and concertina coil over compound wall at New police station at Halvad (Including Electrification Work) DIST:-MORBI(SBD) (4th Attempt)

Name of Work : -SR Work of Door and window repairing, replacement of flooring, concertina coil over compound wall at halvad police line and door &

window repairing, china mosaic at old police station and concertina coil over compound wall at New police station at Halvad (Including Electrification

Work) DIST:-MORBI(Revise).

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful

materials and disposing of the excavated stuff upto any lead & Lift. [A] Loose or Soft Soil Rupees One Hundred Twenty One and

Paisa Seventy Two Only

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

Rupees One Hundred Fifty Five and

2 useful materials and disposing off the excavated stuff upto any lead & Lift. (B) Dense or 36.00 Cum 155.77

Paisa Seventy Seven Only

Providing and laying Cement Concrete 1:4:8 (1cement : 4-coarse sand:8 M/C stone Rupees Two Thousand Seven Hundred

3 aggregates of 40 mm nominal size) curing complete,excluding cost of formwork in 4.00 Cum 2742.27 Fourty Two and Paisa Twenty Seven

Foundation & Plinth. Only

Providing 15mm. thick cement plaster in single coat on ceiling for interior plastering and

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating Rupees Two Hundred Nine and Paisa

coat of neat cement slurry AT GROUND FLOOR. Seventy Two Only

Providing and laying controlled cement concrete M - 200 and finishing smooth with curing

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And

Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of Rupees Six Thousand Seventy Two and

reinforcement and Rate also inclusive of providing & mixing of plasticizer as per approved Paisa Fourty Four Only

make in propotion as per mix design for R.C.C. work in in COPING

Providing & laying TMT Steel Fe 500 reinforcement for RCC work including cutting,

Rupees Seventy Six and Paisa Fifty Two

6 bending,binding & placing in position etc. complete for all floors.TMT steel reinforcement 278.00 kg 76.52

shall be as per approved make list of GSPHCL

Removing and Refixing after proper Repairing the Shutters of doors, windows, Cupboards,

Ventilators with providing necessary wood corner M.S. plate supports, Hinges etc. Rupees Three Hundred Twenty One and

complete. Paisa Seventy Eight Only

Providing and fixing U.PVC/SWR Multi nahni trap of the following nominal dia self cleaning

design with top tile and strainer including cost of cutting and making good the wall and Rupees Five Hundred Eight and Paisa

8 floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali. 52.00 Nos. 508.29

Twenty Nine Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

BRICK WORK using common burnt clay building brick having cruching strength not less

than 35 kg/sq.cm.in foundation and plinth in cement mortar 1:6 brick with frog only shall Rupees Four Thousand One Hundred

be used. Seventy Two and Paisa Sixty Only

Providing & Laying Double Charge vitrified 8 to 10 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface jointed

with color cement slurry including finished with flush pointing & cleaning the surface etc. Rupees One Thousand Seven Hundred

complete. Brand of the tiles shall be as per approved make list of GSPHCL. Shade & Size of Twenty Four Only

tiles shall be as specified in tender item.

Provinding & laying Printed / Coloured Ceramic GLAZED TILES 8 mm thick in skirting,

risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & Rupees One Thousand Four Hundred

jointed with white cement slurry. Seventy Three and Paisa Fifty Only

Providing,fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from

M.S.flat , square bars, round bars,C-channel, box pipe as per detail Drawings.Rate is

inclusive of welding with grinding smooth surface ,two coat of Oil paint and one coat of

yellow Zink chromate primer coat of approved brand only.Oil paint shall be Luxol Enamel Rupees Seventy Five and Paisa Ten

paint of Berger Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian Only

paint or Dulux premium gloss enamel of Dulux paint Only M.S. grill/Gate material

Structural steel should be ISI Mark only.

Providing and fixing solid PVC Flush Door shutter 24mm thick. made from Co-extruded

three layer rigid PVC foam sheet(single Extruded) with density not less than 600kg/cbm

outer layer (0.8-1mm)thick should be rigid PVC with density of not less than 1400kg/cbm.

Door should be water proof, Termite proof, fire retardant & having good screw holding

Rupees Four Thousand Five Hundred

13 capacity(200 kgf). Providing and fixing 100% Solid Wood Plastic composite (WPC) Door 19.00 SQM 4501.96

One and Paisa Ninety Six Only

Frame 90mmx45mm made from wood plastic composite(single Extruded Process)material

with density 780kg/cbm. As per drawing as directed by the engineer in charge.

Providing and fixing standard extruded of alluminium section of size 63.50 mm x 38.10mm

x 1.01mm (Jindal section :20033,@ Wt.0.593kg/Mt) with colour anodized alluminium Rupees One Thousand One Hundred

frame for ventilation with 5 mm thick frosted glass as fetails etc complete for ventilation. 3.00 SQM 1163.92

Sixty Three and Paisa Ninety Two Only

Providing and fixing 4mm thick bajari glass bended in putty /wooden bedding patti with

scrapping of existing putty and glass in existing windows as directed by Engineer in charge. Rupees Six Hundred Seventy One and

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and laying Integrated cement based proprietary water proofing treatment of

required thickness over the roof incl.10mm thick waterproofing cement plaster in cement

mortar 1:3 and china mosaic fitting and finally finishing the surface with white cement

slurry and sloping out terrace slab with following specification laid to required slope not

flatter that 1:80 (the thickness of water proofing treatment near rainwater outlet or the

lowest point of the finished slop shall not be less than 45mm incl. treating the vertical Rupees Eight Hundred Ten and Paisa

surface of the parapet wall unto 20 cms. height above finished level of terracing incl. Ninety Four Only

finishing the top with joint less water proofing plaster, curing testing etc. complete.) Rate

is including ten years performance of guarantee bond to be given on stamp paper. (Nos.

extra shall be paid for increase in thickness for proper slope.)

a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement

admixed with proprietary water proofing compound conforming to IS-2645 and 10mm

thick water proofing cement plaster in Cement mortar 1:3 over the R.C.C slab including

cleaning the surface before treatments.

b) Laying cement concrete using broken brick bats 25 mm to 40 mm size with 50% of

cement mortar 1:4(1 cement : 4 coarse sand) over 10mm thick water proofing cement

mortar 1:3 (1 cement : 3 coarse sand) admixed with proprietary water proofing compound

conforming to IS -2645 to required slope and treating similarly the adjoining walls upto

200mm height including rounding of junction of walls.

(c) After two day of proper curing applying a second coat of cement slurry.

(d) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3 ( 1 cement : 3 coarse sand) admixed with proprietary water proofing

compound conforming to IS-2645 and finally finishing the surface with trowel with neat

(e) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test all above operation to be done in order and as directed and

specified by the Engineer in change.

All above operation to be done in order and as directed and specified by the Engineer In

Providing and laying Cement Concrete 1:2:4 (1cement : 2-coarse sand:4 M/C stone Rupees Three Thousand Seven Hundred

17 aggregates of 20 mm nominal size) curing complete,excluding cost of formwork in 6.00 Cum 3747.27 Fourty Seven and Paisa Twenty Seven

Foundation & Plinth. Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Fixing 600mm dia. loop hot dip galvenised iron concertina coil made out of

2.5mm dia wire 22mm long razor sharp barbs at 35mm center fitted on 40mm x 40mm x

5mm M.S. Angle post of required shape & size at 3.00 mt. center distance. concertina coil

shall be fixed on M.S. Angle stand with the help of 4 Nos. RBT wire M.S. Angle stand shall be

Rupees Five Hundred Seven and Paisa

18 fixed on top of Compound wall with 0.20mt x 0.31mt x 0.40mt. deep block in controlled 655.00 Rmt 507.05

cement concrete M-250. Rate is including of applying one coat of primer and three coats oil

painting on M.S. Angle stand shall be made as per the drawing supplied or as directed by

engineer in charge.

Providing and laying Double Charge vitrified tiles 8mm to 10 mm thick in skirting , risers of

steps and dado on 10 mm thick cement plaster 1:3 (1Cement : 3 Coarse Sand) & jointed

Rupees One Thousand Four Hundred

19 with color cement slurry including finished with flush pointing & cleaning the surface etc. 36.00 SQM 1445.2

Fourty Five and Paisa Twenty Only

complete. Brand of the tiles shall be as per approved make list of GSPHCL. Shade & Size of

tiles shall be as specified in tender item.

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over

and above applying one coat of primer to give an required shape even shade after

throughly Brushing This surface to remove all Dirt and remains of loose poweder material Rupees One Hundred Fifty Three and

20 etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather 167.00 SQM 153.35

Paisa Thirty Five Only

Emulsion Only Paint and primer shall be as per approved make list of GSPHCL

Total Amount Of Civil Work Rs….(A) =

Total Amount Of Civil Work Rs….(A) =

21A Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 2X 1.5 mm2

copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC insulated wire for earth

continuity in 25/32 white approved make press fit casing capping with double locking

arrangement with grooves, trunking of size not below 10/12 mm erected flushed on

wall/ceiling complete in height IS:14927 ISI Part –II and with approved make white

accessories like inside and outside coupler, elbow, tee, junction boxes etc. Also not below

1.8 mm thick duly sealed at joinst and 6 A. Modular type switch / bell push & accessories

and earth continuity of following type, erected on / Acrylic box, single mounting base 47.00 Point 382.00 Rupees Three Hundred Eighty Two Only

frame covered with textured / metallic / white front plate modules erected / flushed on

wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector

(Make & Model approved by EIC and matching colour with switch and accessories) ) as

directed.(Conductor resistance should be as per IS:8130/1984) For Opend 600 mm long

hot deep galvanize

[Length of point wiring must not increase than 10 mtr. For that necessary switch board and

their location must be finalised before execution by agency otherwise payment will not be

done for extra long point. For future extention, if required, agency has to erect one higher

size box as per instruction of EIC & Wire must be having box packing]. For Light point Cat-

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

21B For Bell Point Cat-II

4.00 Point 382.00 Rupees Three Hundred Eighty Two Only

21C For Fan Point 6A Modular type switch and hum free EME step type electronic fan regulator

Cat-II 14.00 Point 568.00 Rupees Five Hundred Sixty Eight Only

21D For separate Point (with 6 Amp. Switch & 3/5 pin socket) Cat-II

10.00 Point 410.00 Rupees Four Hundred Ten Only

21E For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) Cat-II

60.00 Point 234.00 Rupees Two Hundred Thirty Four Only

22A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Caping) having double-locking

arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & 60.00 Mtr. 31.00 Rupees Thirty One Only

erected on wall / ceiling of following size. For 25 mm

22B For 32 mm 10.00 Mtr. 36.00 Rupees Thirty Six Only

23 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed)

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous 180.00 Mtr. 24.00 Rupees Twenty Four Only

fish wire to draw mains with necessary fittings and junction boxes for following dia. (a)

24A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in

25/32 white approved make press fit casing capping with double locking arrangement

with grooves, trunking of size not below 10/12 mm in height IS : 14927 ISI Part –II and

with approved make white accessories like inside and outside coupler, elbow, tee, junction

boxes etc. Also not below 1.8 mm thick duly sealed at joinst with FRLS PVC insulated wire

235.00 Mtr. 56.00 Rupees Fifty Six Only

for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for

earthing as per standard colour code. (Conductor resistance should be as per

24B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper

multi stranded conductor for earthing as per standard colour code. (with 25 mm dia. PVC 90.00 Mtr. 135.00 Rupees One Hundred Thirty Five Only

pipe) (Conductor resistance should be as per IS:8130/1984)

25 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary Rupees Thirty and Paisa Ninety Five

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. 50.00 Mtr. 30.95

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

26 Providing and erecting Plug Point wiring with approved ISI make 2 x 2.5 sq.mm copper PVC

insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in 25/32 white approved make press fit casing capping with double locking

arrangement with grooves, trunking of size not below 10/12 mm in height IS:14927 ISI

Part –II and with approved make white accessories like inside and outside coupler, elbow,

tee, junction boxes etc. Also not below 1.8 mm thick duly sealed at joinst with FRLS PVC

insulated wire for earth continuit with 16 Amp. ISI marked flush type modular switch / 8.00 Point 588.00 Rupees Five Hundred Eighty Eight Only

Socket and accessories erected on PVC / Acrylic box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. For open wiring [a] 16 A.Indicater switch & 1 No. 6/16 A. universal socket

combined white colour suitable for 3 pin top duly.

27 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in

soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made

from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with

washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.)

of earth electrodewith inside conductive material minimum should be 26 kg. Rupees Seven Thousand Twenty Five

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Only

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

28 For Above earthing additional charges for boring in hard rock soil (by breaker) & filling

soft soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) 4.00 Each 276.00 Rupees Two Hundred Seventy Six Only

29 Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 watt

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen

output from luminaire 720 lm, input voltage range 90-300 V AC, 50 Hz cool white (3000 to

7.00 Each 780.00 Rupees Seven Hundred Eighty Only

6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

30 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made

from Aluminum exttusion having enough strength (Sample must be approved by EIC) With

Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W 81.00 Each 370.00 Rupees Three Hundred Seventy Only

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) Approval will be given strictly subject to item

31 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps 6.00 Each 111.00 Rupees One Hundred Eleven Only

integral type, with PC diffuser suitable LAMP holder

32 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I,

50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2)

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption:

maximum 53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body:

Top & Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium body premium

quality, Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Rupees One Thousand Nine Hundred

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No 14.00 Each 1929.00

Twenty Nine Only

vibration and noise due to mechanical parts. (Agency has to erect safey wire with ceiling

fan and checked with EIC) (OEM has to approved model as per tender specification annd

600 mm long hot deep galvanized J-Bolt, nuts, washers with 800 mm under ground and

200 mm above ground level and Foundation in 1:2:4 proportion as per details given by

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

33 Providing & erecting Fan clamp of 30x5 mm flat of required length & 10 mm M.S. Bolt &

Nuts erected with necessary hook of 10 mm M.S. Round Bar. 14.00 Each 98.00 Rupees Ninety Eight Only

34 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod

erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible Core with

earthing. The down rod thickness, hole, locking arrangement, construction, powder

coating, colour shed should be same as original down rod brought with ceiling fan. For that

agency has to give original down rod sample to fabricator and one sample down rod should 10.00 Mtr. 107.00 Rupees One Hundred Seven Only

be approved with EIC. After approval given by EIC agency can use the down rod as per

approved sample. If without approval down rod will be erect on site, agency has to replace

them with own cost.

35 Providing ad erecting approved make single phase Double Door metal clad D.B. as per

relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company

fabricated sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB Door, Back side and Body of MCBDB

must be made of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as

per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder Rupees One Thousand Nine Hundred

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with isolation & 2.00 Each 1912.00

Protecting Cover for 240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC insulated

copper conductor up to terminal blocnd 600 mm long hot deep galvanized J-Bolt, nuts,

washers with 800 mm under ground and 200 mm above ground level and Foundation in

1:2:4 proportion as per details given by manufacturer and EIC considerin

Single phase incoming and horizontal single phase outgoing. For 8 Way MCBDB: Including

1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having breaking

capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp to 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement

and instructions given by EIC on site. Font / number size given by EIC on site as per

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

36 Providing and Erecting Approved make ISI mark ELCB confirming to IS:12640/1988

having serial number printed on it and having sensitivity of 30 mA and breaking capacity of

10 KA and suitable for 240 V, 50 Hz having characteristic of quick acting & Tripping with all

Rupees Two Thousand Two Hundred

advance feature & do not incorporate any electronic component (mounted in MCBDB) 15.00 Each 2213.00

Suitable for operation on single phase 240 Volt max rating of (i) For 40 Amp. DP.

37 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive (C curve)

having 10 KA breaking capacity & confirms to IS:8828 with same company metal box with

earthing terminal having following capacity with necessary numbering / marking with oil

8.00 Each 599.00 Rupees Five Hundred Ninety Nine Only

Paint by painter. For 40 Amp.

38 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS:8828 same company metal box with earthing

Rupees One Thousand One Hundred

terminal having following capacity with necessary Numbering/marking with oil Paint by 3.00 Each 1172.00

Seventy Two Only

painter. [c] 63 Amp.

39 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel

duly powder coated with gasket, dust & vermin proof bakelite shield two earthing

terminals for following type of RCCB, RCCB + MCB [a] For 2 pole [Same company metal box

3.00 Each 272.00 Rupees Two Hundred Seventy Two Only

used as MCB / ELCB used with earthing terminal with necessary Numbering / marking

with oil Paint by painter]

40 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS sheet

dust & vermin proof having hinged door with rubber gasket and necessary busbar supports

with copper busbar having current density not more than 1.6 amp/sqmm (Rated current

per Cross Section area) duly wired with colour insulating tape for phase sequence, three

phase & neutral Each equal & one meter long suitable for following current capacity with

Rupees Four Thousand Three Hundred

necessary painting mounted on wall or pedestal frame of required size with necessary 0.50 Rn. Mtr. 4378.00

Seventy Eight Only

incoming and outgoing connections with proper size of copper strip/wire with lugs as

directed. Suitable for 100 Amp. capacity [make and model approved by EIC strictly as per

tender specification]

41 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on existing

min. 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH

and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange Rupees Two Thousand Two Hundred

required No. of Energy meter & ICDP switch -busbar etc. as per Actual space available in Eighty Nine Only

electrical room at site)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

42 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square

pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint

and true care red oxide metal primer,asian paint make with erection on site as per Rupees Seventy Five and Paisa Ten

direction of engineer in charge with necessary grouting cementing, plastering and finishing Only

complete. All hole opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

43 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 760.00 Each 8.00 Rupees Eight Only

44 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 90.00 Mtr. 141.00 Rupees One Hundred Fourty One Only

bolts if required. [g] One wire 16.00 sq. mm

45 Providing and Laying of Mains with ISI marked, 1.5 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power

100.00 Mtr. 56.00 Rupees Fifty Six Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. [e] One wire 6.00 sq. mm

46 Providing following type of Modular Type Accessories mounted with 20 G company

fabricated metalic box, single mounting base frame covered with textured / metallic front

plate, modules erected with necessary connection. As desired by Engineer in charge. Blank 40.00 Each 16.00 Rupees Sixteen Only

Plate Single Cat-II.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

47 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box with Hot

Deep Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile

35 mm X 7.5 mm Din-Rail & MCB, Brass stud type terminal and arrangement for cable

termination to be erected on RCC foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

(3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering / farma,

(6) Hot deep galvanized average 70 Micron, (7) Detail drawing will be given by corporation Rupees Six Thousand Nine Hundred

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200 mm X 200 Seventeen Only

mm X 12 mm base plate, 4-M16 Bolts and 600 mm long hot deep galvanized J-Bolt, nuts,

washers with 800 mm under ground and 200 mm above ground level and Foundation in

1:2:4 proportion as per details given by manufacturer and EIC considering site

requirement. Approx Pole weight 46 kg. (Make:- Bajaj, Valmont, Transrail, Ambica,RR Ispat

Only) (Test certificate to be submitted))

48 Supplying & erecting Galvanized iron pipe post ISI mark 'B' class 88.9 mm. O.D. 6 mtrs.

Long duly painted with two coats of alluminium paint and metallic base plate of 300 x

x 4 mm. thick to be erected as a compound light pole with wire entry nipple and earthing

bolt. Approximate weight of pole 47 Kg. within permissible limits as per IS effective length

of sections Bottom: 5.5 mtr. having outside dia. 88.9 mm. Top: 0.5 mtrs. having outside dia. Rupees Four Thousand Three Hundred

76.1 mm. (Jindal / Asian / Tata / Surya Prakash make) (ISI test certificate from pipe Ninety Seven Only

manufacture & Class / make / length / O.D. / wall thickness / GI / MS / Weight test

certificate from pole manufacture shall be submitted) [Asian colour must be used]

49 Supplying and making Coil type earthing, coil made from 8 SWG galvanised iron wire with

50 mm OD and 50 turns (length of turns approx. 200 mm) and having additional

continuous streight length of 3.00 mtr at open end and should be connected to earthing

bolt and burried in 1.5 mtr deep specially prepared earth pit complete with salt and 28.00 Each 369.00 Rupees Three Hundred Sixty Nine Only

charcoal/coke as required for coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

50 Providing cement concrete foundation (1:2:4) using 45cm inside dia. Farma including

excavation for the pole with 45 cms dia. round having depth 120 cms. (20 cms. above

ground) with necessary curing, plastering and white washing. 12.00 Each 801.00 Rupees Eight Hundred One Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

51 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG

M.S. sheet having following size complete with fixing arrangement for terminal board, with

necessary hole for wire entry and exit from the box. The box shall be provided with cover

and hinges on one side and bolting at other end The box shall be fixed by clamps fabricated

from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and two coats of

paint having following box size 330 mm x 260 mm x 140 mm (depth). Providing and fixing 21.00 Each 702.00 Rupees Seven Hundred Two Only

Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat pattern

porcelain fuse unit with suitable brass studs with nuts, washers and clamps of size 25 mm x

3 mm suitable for pole painted with one coat of red lead paint.

52A Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for

terrace as per instruction of EIC or wall bracket as per instruction of EIC having nuts and

bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise as

per site condition and suitable welded stiffner reducer and nipple with check nut complete Rupees Four Hundred Eighty Seven

painted with one coat of yellow zinc and two coats of alluminium paint for Single arm Only

bracket suitable for pole or terrace as per design given by EIC (a) For single arm bracket.

(Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail,

Ambica, RR Ispat Only) (Test certificate to be submitted)

52B For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:-

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) 7.00 Each 616.00 Rupees Six Hundred Sixteen Only

53 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire

with total consumption of Max. 45 W with single piece die cast aluminium housing, high

power LED shall be mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen

Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light Rupees Three Thousand Five Hundred

distribution. The watt capacity of each LED must be ≥ 4 watt in streetlight fitting The Twelve Only

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high

quality driver for protection against high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver should be less than 10% and P.F >

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Also the Fixture should meet the following technical criterias Oprating range Voltage

to 270 V, system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K,

CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integralThe Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to the

above product should be operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel partner

of the manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture)

54 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS:

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra

violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road

1030.00 Mtr. 117.00 Rupees One Hundred Seventeen Only

surface for enclosing cable and back filling the same to make ground as per original. (A) For

Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

55 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage

mm thick cable clamp or in existing DWC pipe underground or road crossing or floor of 1290.00 Mtr. 361.00 Rupees Three Hundred Sixty One Only

following size of cables. [B] For 4 core x 4 sq.mm.

56 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage

mm thick cable clamp or in existing DWC pipe underground or road crossing or floor of 100.00 Mtr. 269.00 Rupees Two Hundred Sixty Nine Only

following size of cables. [B] For 4 core x 2.5 sq.mm.

57 Providing & fixing double compressed heavy duty flange type brass cable gland with

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating

tape etc. For following size cables. For 2 to 4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet 50.00 Each 43.00 Rupees Fourty Three Only

58 Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & erecting as directed

by Engineer-in-charge. For 25 mm dia. 45.00 Mtr. 171.00 Rupees One Hundred Seventy One Only

59 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated

round copper wire ISI mark. 275.00 Mtr. 46.00 Rupees Fourty Six Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

60 Painting of street light pole with bracket complete with two coats of Aluminium paint for

following size of pole.(B) up to 6 mtr. 5.00 Each 263.00 Rupees Two Hundred Sixty Three Only

61 Providing & Erecting Universal Astro 5 KVA intelligent streetlight control system insu with

weather proof box for outdoor application. (As per specification attached separately)

Rupees Twelve Thousand Eight

(Make and model approved by EIC) 2.00 Each 12895.00

Hundred Ninety Five Only

62 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to

be erected as per I.S. 2.00 Each 69.00 Rupees Sixty Nine Only

63 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all

types along with accessories etc. complete and handed over to dept. 50.00 Point 1.00 Rupees One Only

64 Dismantling the existing switchgears, DB and Busbar of any size complete with / without

board or angle iron frame. 1.00 Each 7.00 Rupees Seven Only

65 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with

accessories, G.I. down rod, frame etc. and making the site clear.

9.00 Each 9.00 Rupees Nine Only

66 Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from

the cement concrete foundation and making the site clear by refilling the pits with

excavated materials and bringing it to the ground level. 16.00 Each 212.00 Rupees Two Hundred Twelve Only

67A Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick

PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. For One no 200.00 Each 31.00 Rupees Thirty One Only

Single pole 6 A Switch / Bell push

67B One no 3/5 pin 6 A Socket

30.00 Each 31.00 Rupees Thirty One Only

67C One no Single pole 16 A Switch

30.00 Each 47.00 Rupees Fourty Seven Only

67D One no 6/16 A Universal Socket

30.00 Each 47.00 Rupees Fourty Seven Only

67E One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with

indicator & fuse 10.00 Each 124.00 Rupees One Hundred Twenty Four Only

67F Bakelite ceiling rose

30.00 Each 18.00 Rupees Eighteen Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

67G Bakelite lamp holder

60.00 Each 22.00 Rupees Twenty Two Only

67H Electronic Hum free EME Socket Type Steps Fan Regulator

40.00 Each 217.00 Rupees Two Hundred Seventeen Only

67I Providing & Erecting 3 mm thick acrylic Sheet with grooving as directed

600.00 Sq. Inch 3.00 Rupees Three Only

67J Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed

600.00 Sq. Inch 3.00 Rupees Three Only

Total Amount Of Ele Work Rs….(B) =

Total Amount Of Ele Work Rs….(B) =

Total Amount Of (A)+(B) =

Total Amount Of (A)+(B) =

I/C Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.