REPAIR MAINT OF INTERNAL WIRING INCLUDING SUB MAIN WIRING CEILING FAN EXHAUST FAN WALL FANS COOLING APPLIANCES AND ALLIED WORK OF ROORKEE CANTT MH AND PURKAZI UNDER GE ROORKEE

Amount

Taking down copper/aluminium point wiring ( light, fan, socket or power) complete,incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting ( Mirror light,Bulk head,LED Panel 2''x2'',security light,wall fitting,down light,Flood light,post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

-Ditto- all as per item No. 2.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires and same size earth wire.

M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

2runs x 10 sqmm(Ph & N) + 1run x 10 sqmm(earth wire)

Notes for item No. 1.00 to 4.03: (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.

Supply and fix in replacement of switch piano flush type 6 Amps, one way, 240V, 50Hz

Supply and fix in replacement of socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz

Supply and fix in replacement of switch piano flush type 16 Amps, one way, 240V, 50Hz

Supply and fix in replacement of socket 16A & 6A, 2-in-1 flush type universal 240V, 50Hz

Supply and fix in replacement of electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz

Supply and fix in replacement of bell push switch flush type 6 Amps, 240V, 50Hz

Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz

Supply and fix in replacement ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified.

Supply and fix in replacement of Lamp holder, (Angular / Straight) PVC/Polycarbonate body type B-22 with back plate, including LED bulb 12 watts complete all as specified.

Supply and fix in replacement of LED batten type body pre-wired with bipin holders,connector block complete with all accessories including 20 Watt (4 feet) retrofit LED tube with Polycorbonate body, full white and connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED T5 tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver with all accessories including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of LED bulkhead luminaire in polycarbonate body , with IP65 degree of protection 10 watt including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of surface/recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of surface/recessed mounted LED panel light 4'x1' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 225/250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

Supply and fix in replacement of LED street/security light fitting 25 Watt with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 40 mm dia medium grade GI pipe of length 1.20m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of modular MCB protected Top plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified.

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. Make: Legrand / Schineder / Seimen/Havells/Indoasian

Supply and fix in replacement of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCBs shall be measured and paid separately.

All as per item No. 24 here-in-before but SPN, 12 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

All as per item No. 24 here-in-before but SPN, 8 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

All as per item No. 24 here-in-before but SPN, 4 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

Supply and fix in replacement of MCB 100 Amp, 10 KA, TPN, 'C' curve, 415 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 63A, 6 KA, SPN, 'C' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 10A/20A/32A, 6 KA, single Pole, 'C' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable complete with suitable size lugs drawn through and including light grade GI pipe of dia 15 mm upto 7 mtr incl cutting and chases on wall and floor and making good using PCC complete all as specified and directed. Note: The rate quoted shall be deemed to included for excavation and earthwork in any type of soil with retruning, refilling and removal of surplus soil to a distance of 50 Metre.

Taking down existing unserviceable service cable of any description and Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated multi-stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 25 sq. mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

- Ditto - all as per item No 33 but of size 16 sqmm 4 core

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, with smooth internal finishing and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of HDPE Pipe / cable or I pipe and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed .

Taking out defective/worn out bearing of any make and supply and fix new bearing (BBN. 6201) suitable for various makes of ceiling fans of size 1200 to 1400mm sweep. Make: SKF/NBC.

All as per Item No-40 above but 6202.

All as per Item No-40 above but 6203.

Taking out defective capacitor and supply and fix new capacitor of 2.5 mfd of approved make with holding clamp for various makes of ceiling fans. Make:-Epcos/Havells

Taking out defective capacitor and supply and fix new capacitor of 3.15 mfd of approved make with holding clamp for various makes of ceiling fans. Make:-Epcos/Havells

Taking out defective capacitor and supply and fix new capacitor of 4.0 mfd of approved make with holding clamp for various makes of ceiling fans. Make:-Epcos/Havells

Taking out worn out Gun metal bush and supply and fix new Gun metal bush for various makes of ceiling fans of size 1200 to 1400mm sweep.

Taking out defective/burnt out windings of ceiling fans of various makes from Gov Married Accommodations of size 1200 mm sweep from working on 230/250 volt single phase AC supply and rewinding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre all as directed by Engineer-in-Charge.

Taking out defective/burnt out windings of ceiling fans of various makes from OTM Accommodations of size 1200 mm sweep from working on 230/250 volt single phase AC supply and rewinding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre all as directed by Engineer-in-Charge.

All as per item No - 48 above but of size 1400mm sweep.

M & L for painting of ceiling fans along with blades of any make/model of size 1200 to 1400mm sweep with spray paint white in colour supper enameled paint, writing MES No in 20mm letter size with black paint etc complete all as specified and as directed. Note: Before Painting all the dust from Fan along with blades to be clean firs by wet cloth or washing by water as per direction of Eng-in-charge.

S & F Ceiling fans Blade, aerodynamic, white colour, MS suitable for 1200 mm sweep complete all as specified and directed. (set of 3 blades)

S & F Ceiling fans Blade, aerodynamic, white colour, MS suitable for 1400 mm sweep complete all as specified and directed. (set of 3 blades)

S & F Ceiling fan clamp made of 3 mm thich MS flat complete with rubber bush and suitable size nut, bolts and split pin all as specified and directed.

Supply and fix in replacement PVC fan canopy white in colour complete all as specified and directed.

Taking out rusted/defective down rod and supply and fix new down rod of medium grade GI tubing 15mm bore having holes and threading at ends as per site requirement and direction of Eng-in-Charge.

Taking out rusted/defective down rod and supply and fix new down rod of medium grade GI tubing 20mm bore having holes and threading at ends as per site requirement and direction of Eng-in-Charge.

M & L for painting of exhaust fans along with blades of any make/model of size 225 to 380 sweep with spray paint black/existing colour super enameled paint, writing MES No in 20 mm letter size with white paint etc complete all as specified and as directed Note: Before Painting all the dust from Fan along with blades to be clean firs by wet cloth or washing by water as per direction of Eng-in-charge.

All as per item No - 57 above but of size 450mm sweep.

Taking out defective/worn out bearing of any make and supply and fix new bearing(6201/6202/6203) suitable for various makes of exhaust fans of size 225/380mm sweep. Make: SKF/NBC.

All as per item No 59 here in before but of size 450mm sweep.

Taking out defective/burnt winding of exhaust fans of various makes of size 225 to 300mm sweep working on 230 to 250 Volt, single phase, AC supply, and rewinding with supper enameled new copper wire of appropriate gauge including varnishing with good quality varnish baking up, reassembling the fan, testing, transportation, replacement of connector, flexible copper wire of size 23/0.0040 three core up to one metre all as directed

All as per item No -61 above but of size 375/380mm sweep.

All as per item No - 61 above but of size 450mm sweep.

S&F of exhaust fan blades set suitable for 450 mm sweep exhaust fan of approriate size as per sample kept with Engr-in-charge compete all as specified and directed.

All as per item No.64 here in before but size of 375/380mm sweep.

Supply and fix wall mounted PVC fan 450mm sweep BEE star Rated 230 Volt including fastner, nut bolts to fix on wall complete all as specified and directed.

Supply and fixing Energy efficient Ceiling Fan, 1200mm sweep, BEE 5 star rated, white colour, Aerodynamic blade, 230V, incl clamp of suitable size made out of MS flate iron of thick ness not less than 50x5 mm, nut bolt and washer complete all as specified and directed. Make : Luminous Model New york Brooklyn/Copter/Raptor/Propelaire or Crompton Model Gianna or Bajaj Model Esperanza or Orient Model Electric Aeroquiet Noiseless

Supply only Retrofit T8 LED tube rod Polycarbonate 4 feet long 20 Watt, single end, 240 volt Single/double side connection as per direction of Eng-in-Charge.

Supply only Electronic Fan regulator, socket type, 5 steps working on single phase 230 Volts AC Supply.

Supply only Modular fan regulator step type in 5 steps, 2 Module, 240V

Supply only LED T5 tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver

Supply only PVC insulation tape 8 mtr long( 1.8 cm x 0.125mm)

Supply only switch piano flush type polycarbonate single pole one way 5 Amps.

Supply only switch piano flush type polycarbonate single pole one way 15 Amps.

Supply only socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.

Supply only socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type.

Supply only bell push flush type 5 Amps.

Supply only Bell electric Ding-ding working on single phase 230 Volts AC Supply.

Supply only Batten Holder, B-22 base, PVC body

Supply only heating element 1.5 KW Triangular type

Supply only thermostate switch for geyser

Supply only only capacitor 2.5 mfd

Supply only only capacitor 3.15 mfd

Supply only only capacitor 4.0 mfd

Supply only MCB SP 20 Amp, 6KA 'C' Curve

Supply only MCB SP 32 Amp, 6KA 'C' Curve

Supply only MCB SPN 63 Amp, 10KA 'C' Curve

Supply only MCB TPN 100 Amp, 10KA 'C' Curve

S&F in replacement, 32mm dia bore GI tubing, medium grade with all fittings for cable protection including GI clamps, nut & bolts and washers or burried in ground complete all as specified and directed.

PARADISE INFRA POWER COMPANY

A ONE BUILDERS AND ENGINEERS

M/S Durvish Mourya

AMAR NATH SHARMA

NITHYA INFRATECH