Construction of 08 roomed double story building at HSS Barbugh Imamsahib Shopian.

Earth work in bulk excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Filling available excavated earth (exluding rock) in trenchs, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidated each doposited layer by ramming and watering, lead upto 50 m lift upto 1.5m

Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level. Mud mat.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works upto plinth level cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverable separately. 5.38.1 All works upto plinth level

Dry random rubble masonary with hard stone in foundation and plinth: with bond stone including carriage.

Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of all materilas involved complete.

Supply and filling of RBM in plinth including spreading, dressing , watering with all carriage etc complete.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Inclusive for cost of extra cement as per the design mix report. All works above plinth level upto floor V Level.

Providing an

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor V and Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete.

Centering and shuttering including strutting , proping etc. and removal of form for : lintel beams , plinth beams ,girders, bressumers and cantelevers.

Centering and shuttering including strutting , proping etc. and removal of form for : columns , plillars , piers, abutments, posts and struts.

Centering and shuttering including strutting , proping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms.

d laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Inclusive for cost of extra cement as per the design mix report. All works above plinth level upto floor V Level.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all carriages complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in substructure (for septic tank) including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm imported kail wood.

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Imported Kail Wood.

12mm Thick pelaminated particle board decorative laminaton on sides incl all fixtures

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported Kail wood

Providing and fixing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position with holdfast lugs or with dash fasteners of required dia and length. Imported Kail Wood.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 125mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 100mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm

Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with 3.5mm glass panes.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc complete: 300x16mm

12mm Cement Plaster of mix 1:4 (1 cement:4 fine sand) outer walls, Inner Walls, Slab and Floor.

6mm Cement Plaster of mix 1:3 (1 cement:3 fine sand) to ceiling.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing ISI marked oxidized M.S. eye hook with necessary screws eqivalent

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1: 4( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32mm dia

Providing and fixing jali for water closet or wash basin including PVC Waste fittings complete.

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe

Providing and fixing PVC pipes class C pipe incl. solid waste and vent pipes. 100mm

Providing and fixing PVC pipes class C pipe incl. solid waste and vent pipes. 75mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4)

Providing and fixing PVC fittings ( Prince Make ) following fittings as per the directions of engineer Incharge Complete

Door Tee 100mm Size

Door Tee 75mm Size

PVC Collar 100mm

PVC Collar 75mm

PVC reducer 100x75 mm

Floor Trap 100mm Size

Plain Bend 100mm Size

Plain Bend 75mm Size

Door Bend 100mm

Door Bend 75mm

Providing and fixing of CP fittings of standard quality and approved make including all fixtures complete as directed by Engineer In Charge

Nipples of different sizes

Bib Cock

Angle valve

Ball valve

Coupling

Basin Mixer

Providing and fixing PTMT Liquid soap container

C.P. Gratings

Wall Mixer

Construction of 9" thick brick masonary manholes in cement mortar 1:4 mix, foundation cement concrete 1:4:8, 12mm thick inside cement plaster with finishing, making channels in cement concrete 1:2:4 including cost of manhole covers PVC ISI mark with frame size (1'-6" x 1'-6" x 1'-6") inside size.

Providng and Fixing of Geysers 50Litre 2000watt storage water heater (white) including all fittings and fixtures make : venus, jaguar, racold or equivalent.

Structural steel welded in built up sections trusses and framed work incld cutting,hoisting fixing in positon and applying a priming coat of approved steel primer incl. painting all complete. Welded.

Providing and fixing high rib color coated corrugated galvanized PPGI sheets 1000-1020mm cover width 28-35mm high crests at 250-255mm TCT (total coated thickness) high tensile SMP galvalumesteel with silicon modified polester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyster back coat over 5 micron primer coats on both surfaces including side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area) 0.5mm thick ( TATA, JSW or EQ brand) i/c all carriages/H/Load i/c 60cm wide ridges and valleys wherever required i/c all fittings and fixtures in roof sheeting (Tile Profile).

Providing and applying making plinth protection 50mm thick of cement concrete 1:3:6 mix over 75mm bed of dry brick ballast well rammed and consolidated all complete.

Carriage for Different Materials.

Crushed aggregate average lead of 20Kms.

Sand average lead of 20 kms.