Shifting of 33KV/3.3KV substation from Kapildhara Colony of Kurja sub area under Hasdeo Area.

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 metre and upto 10.0 metre

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.

Supplying and erection of a set of three 11 KV disc insulator for 33KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required.

Supplying and erection of single piece nonlinear resistor lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Supplying and Erection of 33KV DO Fuse unit on existing two pole structure with insulator and other assessories complete including locking arrangement as per specifications.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre Ion0 etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & SDring washer sDaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer SDaced at 50mm)

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/steel tubular/ rail pole etc. as required.

Erection of cradle guard as required.

Pocelain AB Switch with complete fittings 33KV

T-clamp for Dog Consuctor

Stay Clamp for "H" Beam

Red Oxide Paint

Aluminium Paint

Concreting of Transformer Foundation (1:3:6)= 15 Cmt.

Concreting of 33KV VCB Foundation (1:3;6)= 7 Cum.

Control Cable (Copper) 8 core 2.5 Sqmm (Unarmored)

Control Cable (Copper) 4 core 2.5 Sqmm (Unarmored)

Control cable (Copper) 2 core 2.5 Sqmm (Unarmored)

MS Nuts and Bolts 16*90mm

MS Nuts and Bolts 16*160mm

MS Nuts and Bolts 16*200mm

70W LED Street Light complete Set

Total impact of GST for the purpose of CTC

M/s. SWETA ELECTRICALS (BID ID -1094769)