REPAIR/MAINT INCLUDING DENTING, PAINTING, POLISHING AND RE-CANNING OF FURNITURE ARTICLES ISSUED TO OFFRS MD ACCN, JCO/ORS MD ACCN AND OTM ACCN UNDER GE (A) JAMNAGAR AT INFANTRY LINE, MIL STN JAMNAGAR

Amount

Chair Dinning FD-69/228, 279 including

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair Dining and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Chair Dinning FD-69/228, 279 PVC Seat

Removing old seat and S&F PVC Seat as per drg.

S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair Dining with PVC seat and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Chair Writing FD-280 /250/20

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge

S&F 1st cl HW triangular bracket 60x60x25 mm as per drg, fixed in repair

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair writting and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Chair Easy FD-229/17

M&L for removing unserviceable plastic cane from Seat and Back and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.

S&F New Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair Easy and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Chair WBB or BKB w/o arms FD-56, FD-285

Removing old seat and S&F new PLY Seat as per drg.

S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

g) S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F New Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair WBB or BKB w/o arms and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIRS TO TABLE CENTRE FD-274/29(M)/235

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade of Dark Walnut shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken legs and S&F new legs of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table Centre and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIR TO PEG TABLE FD 384

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Peg Table all as specified and directed by Engr-in-Charge.

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade of Dark Walnut shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

Removing of old unserviceable long rail and S&F new long rail of 1st class hard wood (TW) as per existing shape and size to peg table complete all as specified and directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table peg and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Table 3'X2' or 900X600mm with / without Drawer FD-55/284/224/41(M)

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade of Dark Walnut shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table 3'X2' or 900X600mm with / without Drawer and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Table Dining 120x90cm FD/MAP-II/03

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade of Dark Walnut shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to able Dining 120x90cm and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Table 3'X3' or 600X600mm with / without Drawer FD-55/284/224/41(M)

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade of Dark Walnut shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.

S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table 3'X3' or 600X600mm with / without Drawer and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Sofa set 5/4/1 seater with Arms Drg No. FD-258, 281, 373,CWE(B)FD/0607

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

g) Replacement of U/S 1 st class HW front/rear rail of 3 seater of as per Drg.

h) Replacement of U/S side rail of 3 seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Sofa set 5/4/1 seater with Arms and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Sofa set 4 seater with Arms Drg No. FD-258, 281, 373

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class HW Batten of seat and back as per Drg.

Replacement of U/S 1 st class HW Arms as per Drg.

Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Sofa set 4 seater with Arms and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Sofa set 1 seater with Arms Drg No. FD-258, 281, 373

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Sofa set 1 seater with Arms and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIR TO TABLE DRESSING GENTS Fd 07-04-2023 Taking sown old UNSV existing parts of table dressing Gents and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top shown on drg all as specified and directed by Engineer-in-Charge.

-do- but sides of 12mm thick particle board all as specified and directed by Engineer-in-Charge.

-do- but bottom of 12mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge

-do- but mirror of size 410x790 and 5.5mm thick make Modi Guard/Atul, all as specified and directed by Engineer-in-Charge.

One nob of aluminium anodized shall be provided to each drawer all as specified and directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table Dressing Gents and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIRS TO CHAIR DINNING OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Back support as specified in the drg

S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair Dining officer and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIRS TO CHAIR DINNING WITH LONG BACK OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density Make: Sleepwell/Kurlon/Coolfoam or higher than curlon with fabric (Superior Quality )fixed in repair on seat of 12mm thick ply Make of approved colour and quality

Back support as specified in the drg

S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Chair Dining officer long and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

REPAIR TO TABLE DRESSING LADIES FD FD-251/378/278 Taking down old UNSV existing parts of table dressing ladies and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top of table dressing ladies, Top shall be of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed all as specified and directed by Engineer-in-Charge.

-do- but sides of 19mm thick teak wood plank

-do- but bottom of 19mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge.

-do- but mirror of size 355x1220mm and 5.5mm thick make Modi Guard/Atul

-do- but leg of size 150x45x45mm

Back shall be 12mm thick particle board with commercial ply on both side.

side and back of drawer shall be of 12mm thick teak wook plank. Bottom of drawer shall be of 6mm thick commercial plywood. Front of drawer shall be 19mm thick particle board over which 1.5mm thick plastic laminated sheet is fixed 3mm thick teak wood edging shall be provided to all sides, front and edges of drawers, Teak wood vertical support out of 45mmx45mm provided the back of mirror all as specified and directed by Engineer-in-Charge.

M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted to Table Dressing Ladies and applying French polish as per wall nut shade in high gloss finished as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge.

Repair to Chairs Verandah FD-359

a) M&L for Removing of U/S canning of seat of chair verandha and recanning of seat of chair verandha with new nylon cane as per drg.

b) M&L Removing of U/S canning of back of chair verandha and recanning of back of chair verandha with new nylon cane as per drg.

c) M&L for Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg and directed.

M & L for preparation of steel surfaces by emery paper to Chair Varandah and applying one coat of synthetic enamel paint White shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

REPAIR/PAINTING OF CHAIR CB STEEL WITH ARMS : FD 75M

M & L for removing unserviceable seat from chair CB steel with with arms and S & F new seat made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16'X3" long with two washers on either side of the seat, and all as specified and directed by Engr-in-Charge.

M & L for removing unserviceable/broken runner and S&F new runner of MS Flat 500mmx18mm x3mm to chair CB tubular steel arms with suitable welding as per drg, and all as specified and as directed by Engr-in-Charge.

M&L for removing unserviceable broken arms rest left or right of chair CB Steel with Arms and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for Chair CB Steel with Arms all as directed by Engr-in-Charge and as shown on drg.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

REPAIR/PAINTING OF CHAIR CB STEEL WITH OUT ARMS : FD 75M

M & L for removing unserviceable seat from chair CB steel with out arms and S & F new seat made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with out arms and S & F new back made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide .4mm thick plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16'X3" long with two washers on either side of the seat, and all as specified and directed by Engr-in-Charge.

M & L for removing unserviceable/broken runner and S&F new runner of MS Flat 500mmx18mm x3mm to chair CB tubular steel without arms with suitable welding as per drg, and all as specified and as directed by Engr-in-Charge.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with out arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

Almirah Large Steel. FD-1031

.M& L for Removing old unserviceable locks from Almirah large steel and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.as shown in drg.

Removing old unserviceable Handle from Almirah large/steel and S & F new handle 150mm of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge. as shown in drg.

M& L for Removing old unserviceable Hings from Almirah large steel and S & F Hings of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Legs from Almirah large steel and S & F New legs of approved quality of existing size fixed with almirah all as specified and directed by Engr-in-Charge.y as shown in drg

M& L for Removing the existing dented shelves from Almirah large and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. all as shown in drg.

M& L for Removing old unserviceable lock Assembly from Almirah large steel and supply and fix new lock assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg .

M& L for Removing old unserviceable door shutter from Almirah large steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side of Almirah Large steel with shelves and all as specified and as directed by Engr-in-Charge.

Almirah Small Steel & Almirah Med Steel FD-1032

M& L for Removing old unserviceable locks from Almirah small/med steel and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Handle from Almirah small/med steel and S & F new handle 150mm 6 of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge.y as shown in drg.

M& L for Removing old unserviceable Hings from Almirah small/med steel and S & F Hings of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed by Engr-in-Charge. as shown in drg.

M& L for Removing old unserviceable Legs from Almirah small/med steeland S & F New legs of approved quality of existing size fixed with almirah all as specified and directed by Engr-in-Charge. as shown in drg

M& L for Removing the existing dented shelves from Almirah small/med steele and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. all as shown in drg.

M& L for Removing old unserviceable lock Assembly from Almirah small/med steel and supply and fix new lock assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg .

M& L for Removing old unserviceable door shutter from Almirah small/med steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in-Charge all as shown in drg

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side ofAlmirah small/med steel with shelves and all as specified and as directed by Engr-in-Charge.

Locker bed side Steel FD 1029

a) M& L for Removing old unserviceable hasp and staple from Locker Bed side and S & F new hasp and staple of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge. as shown in drg.

b) M& L for Removing old unserviceable Handle from Locker Bed side and S & F new handle of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge. as shown in drg. .

c) M& L for Removing old unserviceable hings from Locker Bed side and S & F new hings of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge

d) M& L for Removing old unserviceable legs from Locker Bed side and S & F new legs of approved quality of existing size fixed with screw/ welding to shutter of Locker all as specified and directed by Engr-in-Charge.

f) Refixing loose shelves with spot welding of broken joints nut exceeding 25mm in length.

h) M& L Removing unserviceable existing door shutter of locker bed side and S&F new shutter made out of 1 mm thick PGI sheet complete all as per drg.

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side of Locker Bed side steeland all as specified and as directed by Engr-in-Charge.

Charpoy GI nylon newar comprising of the following items:-

M&L for Removing of old unserviceable nylon newar from charpoy G.I. 32mm and tightening the frame and making it suitable for fixing plywood top and providng 12mm thick (7 Nos of ply) commercial plywood ISI marked BWR type by providing 2 number stiffeners made out of MS flat 40 x 5 mm thick 900mm long with 6mm dia 65mm long nut and bolt with washer (Total 08 Nos) to be provided at the drilling 02 Nos holes on each stiffeners with long rail/short rail and plywood. Two coats of synthatic enamel paint over coat of red oxide primer after black paint of stiffeners and fixing of hard rubber shoes to the bottom of legs complete all as specified and directed by Engr - in- Charge.

Taking out existing unserviceable GI pipe three way elbow from GI pipe charpoy & Supplying and fixing new GI elbow, 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed by the Engineer - in - Charge.

Taking out existing unserviceable GI check nut from GI charpoy & Supplying and fixing new 32 mm GI check nut complete all as specified and as directed by the Engineer - in - Charge.

Taking down existing unserviceable GI pipe long rail of 32 mm bore from GI pipe charpoy & Supplying and fixing new long rail of 32 mm bore GI pipe, medium grade, of length as per existing long rail with proper threading complete all as specified and as directed by the Engineer - in - Charge. Note : (a) GI Pipe 32 mm bore will be issued under Sch B free for fixing. (b) cutting and threading of GI pipe shall be deemed including in the quoted rates.

Taking down the existing short rails and making new short rail by cutting the existing GI pipe long rails 32 mm bore obtained from Item No. 6.04 threading suitably and fixing with existing old elbow complete all as specified and as directed by the Engineer - in - Charge.

Making the existing unserviceable GI pipe short rail 32 mm bore of charpoy obtained from Item No.6.05 above and converting into legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS base plate equal to outer dia of the pipe, welded at the bottom of the leg all as shown in drawing complete all as specified and as directed by the Engineer - in - Charge.

Charpoy GI Ply top comprising of the following items:- FD-220

Removing of old unserviceable ply from charpoy G.I. 32mm and tightening the frame and making it suitable for fixing plywood top and providng 12mm thick (7 Nos of ply) commercial plywood ISI marked BWR type and fixing of hard rubber shoes to the bottom of legs complete all as specified and directed by Engr - in- Charge.

Taking out existing unserviceable GI check nut from GI charpoy & Supplying and fixing new 32 mm GI check nut complete all as specified and as directed by the Engineer - in - Charge.

Taking down existing unserviceable GI pipe long rail of 32 mm bore from GI pipe charpoy fixing new long rail of 32 mm bore GI pipe, medium grade, of length as per existing long rail with proper threading complete all as specified and as directed by the Engineer - in - Charge. Note : (a) GI Pipe 32 mm bore will be issued under Sch B free for fixing. (b) cutting and threading of GI pipe shall be deemed including in the quoted rates.

Taking down the existing short rails and making new short rail by cutting the existing GI pipe long rails 32 mm bore obtained from Item No. 25.03 threading suitably and fixing with existing old elbow complete all as specified and as directed by the Engineer - in - Charge.

Making the existing unserviceable GI pipe short rail 32 mm bore of charpoy obtained from Item No.25.04 above and converting into legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS base plate equal to outer dia of the pipe, welded at the bottom of the leg all as shown in drawing complete all as specified and as directed by the Engineer - in - Charge.

Taking out existing unserviceable GI pipe three way elbow from GI pipe charpoy & Supplying and fixing new GI elbow, 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed by the Engineer - in - Charge.

Table Office Officer Steel FD-1003, 84(M)

a) Removing U/S Lock with S&F new Lock as per Drg.

b) Removing U/S drawer with S&F new drawer as per Drg.

c)Removing of U/S TOP with S&F new TOP as per drg.

d) Removing of U/S Rubber Shoe with S&F new Rubber Shoe as per drg.

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side ofTable Office Officer steel and all as specified and as directed by Engr-in-Charge.

Table Office Clk Steel & Table Typist Steel

a) Removing U/S Lock with S&F New Lock as per Drg.

b) Removing U/S drawer with S&F New drawer as per Drg.

c)Removing of U/S TOP with S&F New TOP as per drg.

d) Removing of U/S Rubber Shoe with S&F New Rubber Shoe as per drg.

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic Clk Officer steel and all as specified and as directed by Engr-in-Charge.

Charpoy with hard top (steel)

Removing old u/s ply and supply and fix new ply as per existing pattern all as specified and directed.

Taking down and S&F new rubber shoes to the legs of the table complete all as specified.

Carrying out minor repairs like denting & gas welding of broken legs/cleat etc and spray painting with one coat of the black colour synthetic enamel paint to complete as directed by Engr-in-charge.`

Table bed side (MAP) FD/E6/MAP/15(R)

a) Removing of existing unserviceable top and S&F with new top of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

b) Removing of existing unserviceable sides and S&F with new sides of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

c) Removing of existing unserviceable back plywood and S&F with new back plywood 6mm as shown in drg.

d) Removing of existing unserviceable upper drawer and S&F with new upper drawer as shown in drg.

e) Removing of existing unserviceable lower drawer and S&F with new lower drawer as shown in drg.

f) Removing of existing unserviceable handle and S&F with new hadne as shown in drg.

g) Rejoining the joints of MS tube with spot weilding in any length where required as per drg.

h) Removing of existing unserviceable rubber shoe and S&F with new rubber shoe as shown in drg.

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side ofTable Bed side steel and all as specified and as directed by Engr-in-Charge.

BED HARD TOP STEEL OFFRS

Removing the existing unserviceable plywood top from charpoy with hard top steel tubular and S&F new 12mm thick BWR plywood of size 1974mmx824mm type with nut and bolt (10 Nos) All as shown on drg Make : Kitply/Century / Greenply.

Removing old unserviceable long rails and S&F new long rails of Bed Hard size 1974x65x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.

Removing old unserviceable stiffners and S&F new stiffner rails of Bed Hard size 850x25x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.`

Removing old unserviceable short rails and S&F new short rails of Bed Hard size 900x65x25mm rectangular MS pipe 18 guage using gas welding and standard workmanship complete as directed by Engr-in-charge.

Removing old unserviceable prelaminated board from footer frame and S&F new prelaminated board of size 750x350x18mm thick prelaminated particular board exterior grade complete as directed by Engr-in-charge.`

Removing old unserviceable prelaminated board from Header frame and S&F new prelaminated board of size 750x350x18mm thick prelaminated particular board exterior grade complete as directed by Engr-in-charge.`

Carrying out minor repairs like denting & gas welding of broken legs/cleat etc and spray painting with one coat of the black colour synthetic enamel paint to complete as directed by Engr-in-charge.`

Removing old unserviceable shoes S&F new shoe for bottom legs

Chair writing steel FD 360

Removing old u/s cushion seat and S&F new cushion seat with all components as per FD

Removing old u/s cushion back and S&F new cushion back with all components as per FD

c) Removing of unserviceable Rubber shoe Chair verandah S&F with new Rubber shoes as per existing size on drg and directed.

M & L for preparation of steel surfaces by emery paper to Chair writing steel with out arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. and as directed by Engr-in-Charge.

JOY ENTERPRISE

Vinayak Distributors

M/S Super Steel Works

PRAFUL ENTERPRISES

motwani and associate

M/S Badri Electicals

Dhangot Brothers