Establishment of New Rythu Bazar in Market Yard, Giddaluru of A.M.C, Giddaluru in Markapuram District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete

Plain Cement concrete (1:5:10) using 40 mm metal . All work upto plinth level: PCC (1:5:10) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, etc., complete

f) Sunshades 0.60meter wide 0.075meters rear side 0.05meter free end

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T P etc., complete

Filling of foundations with sand from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete

b) Super structure

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete

Supplying Fixing HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and fixing of 60x40mm x2.60 M.S Rectangular Hallow section Medium Class pipe including M.S Cleats of 6mm thick cost and conveyance of all materials and labour charges etc., Complete

Supply and fixing of 50x50x2.60mm thick light class 4.00mts length M.S Rectangular pipe for purlins and 6mm thick cleats etc., including cost and conveyance of all mateials and labour charges for fabrication charges etc., Complete

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

VCC M 20 Nominal Mix using 40mm graded metal from approved quarry, including cost and conveyance of all materials including steel centering, shuttering, Machine Mixing, laying concrete, vibrating, lift charges, curing etc., complete

Painting:-2) Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

Painting with Synthetic Enamel paints - Two Coats - For New Iron Work using ready mixed Synthetic Enamel paint in all shades Grade-I including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete

CEMENT JALI - 40 mm thick

Supply of …10 Sqmm.WPTC (Weather Proof Twin Core) ISI Alluminium Wire. Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Nanadicab / Payal / Sudhakar/ Rajnigandha/ airson/Orbit/ollvin/Avocab - 100 RM

Supply Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete suitable for…... up to 3 HP Makes: Siemens / Crompton / LT (MF1)

Supply and Fixing of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 rigid FRLS PVC pipe on surface of wall with PVCJunction boxes and all accessories fixing on chromium plated metallic base saddles including Fixing of existing suitable size Decolam board / MS metal box / Modular box for fixing flush type Modular switches for Light, Fan and separate plug point including all labour charges etc., complete.(Data No. ) - Makes : Precision/Universal Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/Orbit/ AKG

12 / 15 MS plain rod fan hook

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completecopper cable Makes: Finolex / RR kabel / Havells /KEI

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box inlcuindg all labour charges etc., complete for light point

Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete copper cable Makes: Nandicab / Star / Airson/ Benlo / Gemscab /Rajnigandha/Avo cab/CRI/Salzer/ollvin

Supply and fixing of 6A ISI mark Flush type switch with 6A 3/2 pin wall plug socket on a common switch board with earth connections in surface wiring including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/Anchor

Supply and fixing of ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W-60W Lamp (for new installation) Accssories Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/Anchor. Lamp Makes: Phillips / Crompton / Bajaj / Surya / Havells / Style Lamp / Capart

Supply of …stepped type Electronic Regulator... Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/Anchor

Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply of 32A 240V SPN…... Rewirable Fuse Switch in SS enclosure as per IS:13947 Makes: HPL / Havells / Standard / Indo Asian

Supply and fixing of (8 +12) 4 Way TPN DB Horizontal with IP 43 Protection suitable for 12 Nos S.P out goings and for 1 No 4 pole In comer etc complete as per IS 8623; IS 13032; IEC 61439-3. with 1 No 63A FP Isolator and 12 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for SURFACE Mounting etc., complete. DB Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/LT-Newrange. Isolator MCB Makes:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/LT-AU

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete.

Supply and Fixing of M.S Sqaure pipe 50x50x2.60 and L angle of size 50x50x5 mm thick supports for the 18 gugage sheet provided including locking arragenments with handles and hinges, tower bolts, transportation and labour charges for fixing etc., complete for finished item of work.(Name Board)

Providing Painting to Main board at Main gate" రైతు బజార్ " ఆంధ్ర ప్రదేశ్ ప్రభుత్వం; అగ్రికల్చర్ మార్కెటింగ్ శాఖ; గిద్దలూరు మార్కెట్ యార్డ్; మార్కాపురం జిల్లా " inculding cost of painting and labour charges etc., complete

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete

Supply and Fixing of door with salwood frame of 75 x 100mm and 35mm thick solid bond wood block board type with teak ply on both faces with shutter such as 'Z' hold fast, 6 No's hinges 150mm long, 2 Nos Aldrop 300mm long, 1 No's Tower Bolt 150mm long and fixtures to door with required number of screws, bolt and nuts includigng labour charges for fixing the shutter to the frame etc., complete for finished item of work.

Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height imensioncomprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealant .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm).