REPAIR REPLACEMENT AND MAINT TO RISING SUPPLY MAIN DOZING PLANT, PUMP SETS, STARTER PANELS, CLEANING OF UG SUMPS OH RESERVOIRS AND REPAIR MAINT TO DG SET AT MIL STN DHRANGADHRA

Amount

Taking out old un-serviceable GI pipes 50 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,

Taking out old un-serviceable GI pipes 40 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,

Taking out old un-serviceable GI pipes 25 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,

Taking out old un-serviceable GI pipes 20 mm laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed,

Taking down old unserviceable 80mm bore, CI/DI/MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 100mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 150mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 200mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 250mm bore,MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

M&L for laying and jointing by welding Heavy quality Class 'C' M.S. pipe of size 250mm conforming to IS:1239 including fittings i.e. tees, bends, elbows, unions, reducers, flange joints, rubber insertion nuts & bolts etc. as required, including painting with two coats of enamel paint of over a coat of primer all as specified and directed.

S&F, in replacement of cast iron sluice valve 250 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed.

S&F, in replacement of cast iron sluice valve 200 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed.

S&F, in replacement of cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed.

S&F in replacement of, cast iron sluice valve 100 mm dia with flanged ends class PN-1 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed.

S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 20mm bore of pipe.

S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 25mm bore of pipe.

S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 40mm bore of pipe.

S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 50mm bore of pipe.

S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for 80mm bore of pipe.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

S&F in replacement of 150mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.

S&F in replacement of 100mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.

Taking out existing damaged brush from suction sweeping equipment and supply and fixing of new nylon brush(soft quality) with as standard base as per manufacturer of size 2 feet long, wide suitable for fix with suction sweeper.

M&L and testing for 100mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.

M&L and testing for 150mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.

M&L and testing for 200mm bore cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length laid in trenches complete all as specified and directed.

Supply and fixing of new nylon brush (soft quality) with wooden base of existing size and length . As per manufecturing suitable for fix with telescopic handle.

Removing existing wornout wheel from suction sweeper and supply and fixing of new wheel made of nylon of existing size and length including locking bolt complete.

Supply , fabricate and fix algae/dry leaves removing net having frame size 30cm x 30cm, made of stainless steel pipe 20mm dia, duly fixed with nylon net as per the existing and suitable for fixing with existing teliscopic handle.

Taking out existing damaged flexible pipe from suction sweeper pumps and Supply & fix PVC flexble hose pipe 50mm oute dia including necessary jubli clamp complete all as specified and directed.

Supply and fix nylon rope of size 20 mm dia multi stranded super flexible type and all as per specified and directed by Engr-in-charge complete all as specified and directed.

Taking out existing OLD/UNSV cable from suction sweeper pump and supply & connecting PVC insulated and sheathed submerceable flexible cable(un armoured) multi strunded copper conductor of size 6 sqmm 4 core complete all as specified and directed.

Repairs / rewinding of centrifugal motor of cap 3 HP 3Phase, 415 Volt, by removing burnt winding and rewinding with super enamelled copper winding wire with same as existing turn & gauge to achieve desired including replacement of bearings complete and couple with the existing pump and testing complete as per directed by Engr-in-charge.

M&L for Terminal plate cover made of CI terminal plate for 60/120 HP centrifugal motor ,best quality including dismantling/taking out of unserviceable terminal plate of any make and type complete all as specified and directed

Attended the complaint of Star delta starter any type /make capacity 60 HP including replacement of U/S parts sch as over load relay/ contracter/ single phase preventer and wiring as required to made the starter serviceable condition complete all as specified and directed. (Note : Spare parts shall be measured and paid separatly )

Replacement of Sparekit unit for ML-4 contactor 66-110 Amps complete fixed in repairs all as specified and directed.

Replacement of Over load relay for ML-4 contactor of relay range 66-110 Amps complete fixed in repairs all as specified and directed.

Replacement of Timer switch unit star- delta starter 60 HP complete all as specified and directed.

M&L for Electronic motor protection relay to protect the motor against over load phase loss, phase unbalance, phase reversal and stalling in single compact unit with field sutaible time and current rating, suitable for 20 to 60 HP motors complete all as specified and directed.

DOL starter suitable for 3 HP to 7.5 HP electric motor, 3 phase, 415 volts, 50 c/s including dismantling/taking out of unserviceable starter of any make and type complete all as specified and directed

S&F in replacement of CI fittings for flanged pipes, bends, tapers, Tee pieces (Single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged complete all as specified and directed.

M&Lfor run lead joint for 100mm bore spigot & socket CI pipes and fittings complete all as specified and directed.

M&Lfor run lead joint for 150mm bore spigot & socket CI pipes and fittings complete all as specified and directed.

M&Lfor run lead joint for 200mm bore spigot & socket CI pipes and fittings complete all as specified and directed.

Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge or the capacities of 100000 Glns.

Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge or the capacities of 300000 Glns.

Cleaning of Over head reservoirs of capacity 40,000 gallon 18 Mtr staging by scraping the inner walls of OHR & cleaning with wire brush, taking out all dirt, scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection and including writing on tank on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacities.

S&F in replacement of column pipe made out of GI heavy grade size 100mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.

S&F in replacement of column pipe made out of GI heavy grade size 80mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.

M&L for Lifting of UNSV submersible pump and motor (20 HP to 45 HP) complete set along with column pipe, safety rope and cable Approx 100 mtr depth with the help of employing chain pulley block and other T&P items all as specified and directed by Engr-in-Charge.

M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge

M&L for disconecting the submersible electric motor of 45HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'F' class PVC insulated copper winding wire of appropriate existing gauge and weight, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including comissioning and testing complete all as specified and directed. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&L, in repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length.

(ii) S&F in repair/replacement of thrust bearing of appropriate dia and size.

(iii) S&F in repair/replacement of coupling cage including bolt and nuts.

De-assembling the pump set of 45HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&L in repair/replacement of intel ring complete all as specified and directed.

(ii) M&L in repair/replacement of Stainless Steel impeller complete all as specified and directed.

(iii) M&L in repair/replacement of pump shaft made out of stainless steel of existing size and length complete all as specified and directed.

(vi) S&F in repair/replacement of coupling with rubber bushes, slot key, bolt and nuts complete all as specified and directed.

(v) M&L in repair/replacement of pump sleeves SS complete all as specified and directed.

M&L for dismantling the submersible electric motor of 20HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'E' class PVC insulated copper winding wire of appropriate gauge, superior quality, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including commissioning and testing all as specified and directed..Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&Lin repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length.

(ii) S&Fin repair/replacement of thrust bearing of appropriate dia and size.

(iii) S&Fin repair/replacement of coupling cage including bolt and nuts.

De-assembling the pump set of 20HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed.. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&Lin repair/replacement of intel ring complete all as specified and directed.

(ii) M&Lin repair/replacement of Stainless Steel impeller complete all as specified and directed.

(iii) M&Lin repair/replacement of pump shaft made out of stainless steel of existing size and length complete all as specified and directed.

(vi) S&F, in repair, coupling with rubber bushes, slot key, bolt and nuts complete all as specified and directed.

(v) M&Lin repair/replacement of pump sleeves SS complete all as specified and directed.

S&F in replacement of PVC insulated and PVC sheathed, Heavy duty, submersible flat cable of copper conductor, multi stranded, 3 core of size 25 Sqmm, 1100 volts grade. Make-Fnolex/Plaza/Havells.or equivalent

Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 250 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent

Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 200 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent

Disconnecting the existing Unserviceable MCCB, taking out from the panel board and replace by S&F new MCCB 3 pole, 160 Amps, 35/36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, thermal & adjustable magnetic setting, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete all as specified and directed. Make : STANDRAD / HAVELLS / ABB or equivalent

S&F in replacement of on load change over switch open execution type, front handle operated, 4 pole, 415 volts, 50 Hz, AC supply of 400 Amps complete all as specified and as directed. Make :STANDRAD / HAVELLS / C&S or equivalent

Dismantling of existing unserviceable motor of capacity 120 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing Suitable for 120 HP centrifugal Motor complete all as specified and directed.

Dismantling of existing unserviceable pump of capacity 120 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 120 HP Centrifugal pump sets complete all as specified and directed.

Replacement of Brass impeller suitable for 120HP pump sets complete all as specified and directed.

Replacement of bushes suitable for of 120 HP pump sets complete all as specified and directed.

Supply and replacement of suitable Rubber couppling of 120 HP pump sets complete all as specified and directed.

Dismantling of existing unserviceable motor of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 60 HP centrifugal Motor complete all as specified and directed.

Replacement of SS shaft Suitable for 60 HP centrifugal Motor complete all as specified and directed.

Dismantling of existing unserviceable pump of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 60 HP centrifugal pump sets complete all as specified and directed.

Replacement of Brass impeller suitable for 60 HP centrifugal pump sets complete all as specified and directed.

Replacement of Suitable bushes of 60 HP pump sets complete all as specified and directed.

Supply and replacement of Rubber coupling 60 HP pump sets complete all as specified and directed.

Supply and replacement of SS couppling 60 HP pump sets complete all as specified and directed.

Dismantling of existing unserviceable motor of capacity 5/7.5 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling, bearings, bushing,shaft repairing complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface for painting and testing complete at site on full load all as directed by Engr-in-charge. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Rewinding of decrine dozing motor repair/ rewinding exisiting 1/2/.5 Hp motors. super enamelled copper wire of existing gauge including disconnection of motor and reassembling after rewinding including varnishing, paper insulation and replacement of defective parts re- installing, testing & commissioning complete all as specified and directed by Engr-in charge

M&L for Rotor assembly with bearing brackets and tolerance rings suitable for Decreen dosing pump complete all as specified and directed.

M&L for Single head feed rate control with shaft complete all as specified and directed.

M&L for Injection check valve suitable for dosing pump fixed in repair all as specified complete all as specified and directed.

M&L for Duckwill suitable for dosing pump fixed in repair all as specified complete all as specified and directed.

M&L for Non return valve suitable for Decrin dosing pump complete all as specified and directed.

M&L for Housing-UC for decrine dosing pump complete all as specified and directed.

M&L for Pulser with pot Meter,Led&Vari for decrine dosing pump complete all as specified and directed.

M&L for Solenoid Assembly-UC for decrine dosing pump complete all as specified and directed.

M&L for Speed Knob for decrine dosing pump complete all as specified and directed.

M&L for Head for decrine dosing pump complete all as specified and directed.

M&L for Diaphragm- UC for decrine dosing pump complete all as specified and directed.

S&F in replacement of foot valve of size 150 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.

S&F in replacement of foot valve of size 100 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.

M & L for preparation of old painted iron rolling setters/panels by synthetic enamel (ordenary tin) paint over finished surfaces including repair oiling & greasing of setters for smooth functioning complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for foundation of poles etc complete all as specified and directed.

M&L for PCC 1:2:4 type C-2 using 20 mm graded stone aggregate for coping of poles etc complete all as specified and directed.

M&L in replacement of old un serviceable Stainlesssteel spindle with gun metal gutka suitable for 200mm sluice valve of any make all as specified and directed.

M&L in replacement of old un serviceable Stainlesssteel spindle with gun metal gutka suitable for 150mm sluice valve of any make all as specified and directed.

M&L in replacement of old un serviceable Stainlesssteel spindle with gun metal gutka suitable for 100mm sluice valve of any make all as specified and directed.

Attending CI/DI pipe 80 mm to 200 mm dia pipe line break downs in Joint Leakage pipe broken ,flange leakage including necessary arrangement Lead joint,gascuts ,nuts and bolts , excavation and returning filling all as specified and directed. Note: fittings and pipes measured for separatly in respective schedule.

M&L for cleaning of supply and distibution line surrounding area by surface excavation upto 10 cm depth incl removing shrubs,grass,miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed.

M&L for Contact set comprising of 03 Nos moving contacts & 06 Nos. fixed contacts suitable for Oil mimersed star- delta starter 60 HP to 120 HP fixed in repair complete all as specified and directed.

Supply only PPM test kit for water testing complete all as specified and directed.

Supply "O" Todoline solution for water testing purpose in 500 ml bottle make Nice/Glaxo or existing make complete all as specified and directed.

Supply only First AID Box Including all items for installation complete all as specified and directed.

Disconnection of existing pipe connections and electrical connections, de-watering and lifting up the Non cloging type submersible pumps 12.5 HP from UG sewage sump of 10.7 mtr deep carefully and transporting to workshop for repair and bringing back at site after repair and lowering the same including making the water and electric connection including commissioning and testing complete. Note :- (i) Repair of submursible pump and pump motor shall be measured & paid separately under respective item of this schedule. (ii) T&P shall be arranged by the contractor. (iii) Transportation of pump set from site to workshop and bringing back at site inclusive in quoted rate.

De-assembling of electric motor of 12.5 HP of Non cloging submersible pump set cutting and removing the existing burnt winding wire of any gauge, cleaning and making good the slots, rewinding the electric motor with PVC insulated copper wire of existing size/gauge and weight application of insulating material & varnishing and re-assembling the motor, commissioning & testing complete for the entire satisfaction of Engineer-in-charge all as specified and directed.

M&L for replacing of ball bearings 12.5 HP submersible motor

M&L for replacing moisture seal

De-assembling of Non-clogging submersible pump of 12.5 HP capacity and replacement of Mechanical seal

M&L for replacing of Lower Bearing/bushings

M&L for replacing of O Ring

M&L for replacing of Spiral plate

M&L for replacing of Compay recommended Lubricating oil

Repair to Star delta starter any type /make capacity 12.5 HP including replacement of U/S parts sch as over load relay/contacter/single phase preventer and wiring as required to made the starter serviceable condition(Note : Spare parts shall be measured and paid separatly )

Supply only over load realy

Supply only contactor

Supply only single phase preventer

Supply and replace Voltmeter digital type of range 0-500 volt square mouthed fixed in repair complete all as specified and directed. Make: AE/MEI/Havells or Equivalent

Supply and replace Ammater digital type of range 0-200 Amps 96mm square square mouthed fixed in repair complete all as specified and directed. Make: AE/MEI/Havells or Equivalent

M&L for cleaning of underground RCC sewage sump of 16 Mtrs deep, 12 Mtrs internal dia, de-watering, taking out sludge/mud from the sump, rubbing, scraping all around vertical walls, floor, cleaning with fresh water, applying two coat of white wash of internal surfaces and outer exposed sufaces of wall and floor, including thrown away the sludge/mud out side of the MD land (as directed), complete all as specified and as directed. Note- All T&P and safety measure kit for deployed workers shall be arranged by the contractor. No extra payment shall be made by the Department

Supplying, installing, in-replacement, connecting and testing battery 12V, 88 AH (Maintenance free) for DG Set

Supplying, installing, in-replacement, connecting and testing battery 12V, 180 AH (Maintenance free) for DG Set

Supply and replacement of coolent superior quality/grade. Make-Golden Crusher/Servo/Tata.

Supply and filling in replacement of engine oil 20 W 20W 40. Make : Sarvo/Castrol/Volveline.

Supply and replacement PVC insulated and PVC sheathed Heavy duty submersible cable of copper conductor, multi stranded, 3 core of size 16 sqmm, 1100 volts grade.

Taking out existing damaged pipe from Sewage pump house and Supply & fix PVC flexible heavy duty hose pipe 100 mm outer dia including necessary fittings compleate

Supply and fix automatic voltage regulator upto 63 KVA DG set complete as per existing DG sets all as directed by Engineer-In-Charge.

Supply and fix in repair automatic voltage regulator 100 to 200 KVA DG set complete as per existing DG sets all as directed by Engineer-In-Charge.

Supply and fix Rotating rectifire Assambly 50 to 63 KVA DG set complete as per existing DG sets all as directed by Engineer-In-Charge.

Supply and fix Rotating rectifire Assambly 100 to 200 KVA DG set complete as per existing DG sets all as directed by Engineer-In-Charge.

Maintenance and servicing of DG sets including attending faults on call basis/requirement for normal repairs including replacement of defective & worn out parts by new spares such as filters, gaskets, V belts, Engine oil, rubber hoses, worm drive clamps, nut bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc and greasing of bearings of engine and alternator, checking of batteries, adding distilled water, checking of oil and coolant levels as directed by Engineer-in Charge. Note : 1. Spares required for above maintenance will be measured and paid separately under relevant item/parts 2. Servicing to be carried out as per manufacturer instruction )

(a) D. G . Set 200 KVA, Engine make: cromton greaves, Location :NARMADA pump house

(b) D G . Set 100 KVA, Engine make: greeves, Location :M.H

(c) D G . Set 62.5 KVA, Engine make: Kirloskar, Location :Pump house No 08

(d) D G . Set 62.5 KVA, Engine make: Kirloskar, Location :Amn Dump

(e) D G . Set 62.5 KVA, Engine make: Kirloskar, Location :Bde HQ

(f) D. G . Set 50 KVA, Engine make: Kirloskar, Location :Pump house No 07

(g) D. G . Set 50 KVA, Engine make: Powerol , Location :MES IB

(h) D. G . Set 30 KVA, Engine make: Powerol , Location PH no.4

(j) D. G . Set 15 KVA, Engine make:Greaves cotton , Location :sewage pump House 3

Supply only diesel filter element with O ring, suitable for following capacities of DG sets :-

(a) D.G Set 15 KVA

(b) D.G Set 30 KVA

(c) D. G . Set 50 KVA

(c) D. G . Set 62.5 KVA

(d) D. G . Set 100 KVA

(e) D. G . Set 200 KVA

Supply only oil filter element with 'O' ring, suitable for following capacities of DG sets :-

(a) D.G Set 15 KVA

(b) D.G Set 30 KVA

(c) D. G . Set 50 KVA

(d) D. G . Set 62.5 KVA

(e) D. G . Set 100 KVA

(f) D. G . Set 200 KVA

Supply only air filter element suitable for following capacities of DG sets:-

(a) D. G . Set 50 KVA

(b) D. G . Set 62.5 KVA

(c) D. G . Set 200 KVA

Supply only rubber hose pipe set for water circuit complete with clamps, suitable for following capacities of DG sets :-

(a) D.G Set 30 KVA

(b) D. G . Set 50 KVA

(C) D. G . Set 62.5 KVA

M&L for Dismantling of radiator , taking it to work shop for overhauling & cleaning descaling with acid removal of leakage, welding brazing & refixing it duly repaired etc all as directed by Engineer- in- Charge

(a) D. G . Set 50 KVA

(b) D. G . Set 62.5 KVA

(c) D. G . Set 100 KVA

Calibration of FIP and injectors including petty repairs to make the FIP functional for the following capacities of DG sets including necessary spares required for smooth functioning of FIP

(a) D. G . Set 50 KVA

(b) D. G . Set 62.5 KVA

(c) D. G . Set 200 KVA

Abhishek Enterprises

ARTI CONSTRUCTION

ALBA AC AND REF SERVICES

Shree Builders

Bhumi Construction

Electromech Engineers

Haritwal traders

M.A. MUNSHI AND CO.