Shifting of Electric Utilities for construction of Flyover at Sangrama (Phase 2nd) Under DC Head

Amount

Supply , Transportation and errection of 13MTR long ST Poles (410 SP-33) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit. (as per REC Standard)

Supply, Transportation and errection of 11MTR long ST Poles (410-SP 56) completely erected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit . (as per REC standard)

Supply,Carraige upto site,, laying ,stringing, tensioning , binding of ACSR Conductor, (100mm2 ACSR Conductor) as per REC standard.

Supply, transportation and fixing of GI Channel /Angle Iron for Cross Arms, Braces, Transformer Belt, F-Top, Collers etc for Sub Station and poles (Complete Job including Nuts & Bolts and Washers)

Supply and fixing of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply and fixing of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp as per REC standard

Supply and fixing of 11 kV Isolator, Double Break,3-pole, 630 Amp, horizontal mounting Type, with Earth Switch. as per REC standard

Supply and fixing of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with fitting as per REC standard

Earthing of Poles Complete by GI Pipe 40 mm or GI Rod 19 mm 3mtr long through GI Strip 25x3 mm (as per REC Standards)

Supply, Carriage up to site, Installation, testing and Commissioning of danger Plates including clams etc.

Supply, Carriage up to site, Installation, testing and Commissioning of anti-climbing devices with clamps along with required barbed wire

Cement bottoming of S.T poles in 1:2:4 mix 1/6th of the height of pole below the ground and 1ft above the ground cylnerical shape with circular radius 9” from the pole centre) using 40mm crushed stone aggregate mix. As per Drawing 0.78 cum/pole & Tappered at the Top. (as per REC standard) for 13 MTR ST Pole

Cement bottoming of S.T poles in 1:2:4 mix 1/6th of the height of pole below the ground and 1ft above the ground cylnerical shape with circular radius 9” from the pole centre) using 40mm crushed stone aggregate mix. As per Drawing 0.66 cum/pole & Tappered at the Top. for 11 MTR ST Pole

Poviding and Painting of ST Poles with one coat of red oxide and two coats of aluminum paint to give an even shade using anti corrosive paint of standard brand (Nerolac/ Asian) paints) including cost of paint along with stamping on poles showing therein name of the firm date, year of instllaiton and the debitable head etc.

Supply, Carriage up to site, Installation, of Sign Board (2X2 feet) (Inscribed with Substation Details provided by this Division) along with required accessories like clamps, nuts and bolts etc.

Supply, Carriage up to site, Installation, testing and Commissioning of Sundry items like Aluminium lugs, Jumpers, Binding tapes etc.

Pre, during and post execution geo tagged photographic evidence consisting of 5x7 inch photographs in coffee table book (covering each pole/Sub Station)

AL-AWAAL BUILDERS AND DESIGN PVT LTD (BID ID -2250933)