Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC THENNADY LP S | VELLORE | TAMIL NADU | 632001 | ₹9.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹9.5 LRejected-AOC | ₹9.5 L | L2 | Rejected-AOC L2 |
| 3 | L3₹10.8 LRejected-AOC | ₹10.8 L | L3 | Rejected-AOC L3 |
| 4 | L4₹10.8 LRejected-AOC | ₹10.8 L | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | PT.Sebastian L3 | SEBASTIAN ABRAHAM L1 | V.RATHEESH L2 | P.T.MICHAEL L4 |
|---|---|---|---|---|---|---|---|
| 1.00Detailed Estimate | |||||||
| 1.00 | OD274069/2025-2026:Providing Computer Table with side cup board using 18 mm thick HDF board with both
sides decorative lamination including drawer, key board tray,shutter including all cost conveyance, labour charge
etc complete as per the direction of deptl. officers at site excluding cost of fittings | 96.5 | sqm | 2,400 ₹2.3 L | 2,200 ₹2.1 L | 2,220 ₹2.1 L | 2,452.32 ₹2.4 L |
| 1.00 | OD274065/2025-2026:Providing and fixing 8mm thick glass pans for side partition work for table including cost
of D channel,silicon ,sealant,labour charge for side polising fixing as per dirction of deptl officers at site | 15.75 | sqm | 2,300 ₹36,225 | 1,300 ₹20,475 | 1,800 ₹28,350 | 1,777.67 ₹27,998.30 |
| 1.00 | OD274068/2025-2026:Extra for etching in glass work including all labour etc as per direction of officers | 15.75 | sqm | 1,600 ₹25,200 | 1,000 ₹15,750 | 1,200 ₹18,900 | 1,791.55 ₹28,216.91 |
| 1.00 | 9.60.3:Providing and fixing ISI marked IS : 453 oxidised M.S. double acting spring hinges
with necessary screws etc. complete. (Copper oxidized as per IS 1378).100 mm | 60 | no | 280 ₹16,800 | 250 ₹15,000 | 225 ₹13,500 | 252.17 ₹15,130.20 |
| 1.00 | 9.165.1:Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm | 101 | no | 125 ₹12,625 | 100 ₹10,100 | 101 ₹10,201 | 113.39 ₹11,452.39 |
| 1.01 | OD274060/2025-2026:Providing and fixing telescopic drawer channels 400 mm long with necessary screws etc
complete as per the direction of engineer-in- charge | 45 | set | 425 ₹19,125 | 400 ₹18,000 | 350 ₹15,750 | 404.12 ₹18,185.40 |
| 1.01 | OD274059/2025-2026:Providing and fixing Multipurpose cupboard lock approved quality including all cost conveyance labour charge etc complete as per the direction of Engineer-in-charge | 86 | each | 139 ₹11,954 | 100 ₹8,600 | 150 ₹12,900 | 139.85 ₹12,027.10 |
| 1.01 | OD274066/2025-2026:Providing and fixing 9mm thick glass pans for table top with side polising fixing as per dirction of deptl officers at site | 1.8 | sqm | 2,600 ₹4,680 | 2,100 ₹3,780 | 2,275 ₹4,095 | 2,444.7 ₹4,400.46 |
| 1.01 | OD274067/2025-2026:Providing and fixing double side pre laminated HDF 18 mm thick or equivalent make, in shelves with screws and fittings wherever required,edged to be painted with polyurethane primer as per the direction of site Engineer -in-charge. | 166.61 | sqm | 2,200 ₹3.7 L | 2,200 ₹3.7 L | 2,010 ₹3.3 L | 2,232.8 ₹3.7 L |
Tender Value
₹12.1 L
EMD Value
₹30,190
Closing Date
20 Feb 2026, 4:00 pmClosed
Assistant Executive Engineer
PWD Buildings Sub Division Alappuzha
GENERAL RE SURVEY SUPERINTENDENT OFFICE ALAPPUZHA Renovation and other maintenance in Resurvey Office Alappuzha in Civil Station Annexe General Civil Work
2026_PWD_834809_1
PWD/BLDG/TR/620/2026_5_1_1/1
Open Tender
Civil Works - Buildings
270 days
ALAPPUZHA
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹30,190
Yes
12 Mar 2026
9 Feb 2026
23 Feb 2026
9 Feb 2026
20 Feb 2026
9 Feb 2026
9 Feb 2026 - 20 Feb 2026
Detailed Estimate
OD274069/2025-2026:Providing Computer Table with side cup board using 18 mm thick HDF board with both sides decorative lamination including drawer, key board tray,shutter including all cost conveyance, labour charge etc complete as per the direction of deptl. officers at site excluding cost of fittings
OD274065/2025-2026:Providing and fixing 8mm thick glass pans for side partition work for table including cost of D channel,silicon ,sealant,labour charge for side polising fixing as per dirction of deptl officers at site
OD274068/2025-2026:Extra for etching in glass work including all labour etc as per direction of officers
9.60.3:Providing and fixing ISI marked IS : 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete. (Copper oxidized as per IS 1378).100 mm
9.165.1:Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
OD274060/2025-2026:Providing and fixing telescopic drawer channels 400 mm long with necessary screws etc complete as per the direction of engineer-in- charge
OD274059/2025-2026:Providing and fixing Multipurpose cupboard lock approved quality including all cost conveyance labour charge etc complete as per the direction of Engineer-in-charge
OD274066/2025-2026:Providing and fixing 9mm thick glass pans for table top with side polising fixing as per dirction of deptl officers at site
OD274067/2025-2026:Providing and fixing double side pre laminated HDF 18 mm thick or equivalent make, in shelves with screws and fittings wherever required,edged to be painted with polyurethane primer as per the direction of site Engineer -in-charge.
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
OD297069/2025-2026:Providing best quality revolving chair for computer table including all cost,conveyance,etc complete as per the direction of deptl. officers at site
OD297071/2025-2026:Supplying office chair including all cost conveyance etc . complete .
OD274061/2025-2026:Engaging Man coolie for shifting and rearranging office files and furniture.
OD274062/2025-2026:Engaging fitter for repairing work.
OD274063/2025-2026:Engaging carpenter
14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm)
21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
OD297198/2025-2026: Providing and fixing Acrylic ACP Combined Name Plate suitable size as per the direction of deptl. officers at site.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1404431.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1404431.xls
BOQ • 0.31 MB
PRELIMINERY.pdf
Tender Documents • 0.24 MB
form_of_tender-1.pdf
Other Document • 0.18 MB
EPAYMENT.pdf
Tender Documents • 0.06 MB
integrity_pact-1-1.pdf
Other Document • 0.05 MB
affidavit.pdf
Additional Documents • 0.26 MB
SBD.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid