DEPOSIT-RENOVATION OF TALUK

Amount

Renovation

OD78513/2021-2022:Providing and fixing PVC Foam Board density 0.55 board KEMERON or K BOARD or Similier brands , with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand .( Based on 9.157.2)

OD78527/2021-2022:providing and fixing Stainless steel AUTO hinges with necessary screws etc. complete as per directions of Engineer -in-charge. (Base 9.76)

OD78528/2021-2022:providing and fixing Stainless steel OLIVE or OSEL Similier brand telescopic drawer channels 450 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.

OD78565/2021-2022:Providing and fixing GODRAJ Multy lock Or Similier with screws etc. complete (Base 9.76)

9.81.2:Providing and fixing bright finished brass handles with screws etc. complete:100 mm

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

OD78739/2021-2022:Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. Pre- laminated particle board with decorative lamination on both sides (Base 9.7.5.2)

OD78833/2021-2022:Engeging Fitter for Existing partition dismantling

ABDUL NAZAR MC

YASIR AHAMED N

Bidder Name

YASIR AHAMED N

ABDUL NAZAR MC

sainulabid