PAINTING TO RUNWAY TAXI TRACKS RETRO REFLECTIVE PAINTING TO DISPERSAL AREA RUNWAY MARKING JOINT FILLING IN DISPERSAL AREA DTGM SIGNAGE BOARD INCLUDING SURFACE CONCRETE AND MOORUM FILLING AT INS GARUDA NAVAL BASE KOCHI UNDER GENW KOCHI

Amount

M&L for preparation of old painted taxi link/ dispersal area surface exc 10cm width and applying one coat of retro reflective paint marking using Flexo-O-Lite type III high index glass beads by mechanical means complete all as specified and directed by the Engr-in-charge. Note for item No 1 to 13 :- (i)Site for execution of work will be made available to contractor only on Saturday, Sunday, other Holidays and on non operational days of Airport after consultation with users by GE / Engineer-in-Charge . However the availability of site will be intimated to contractor minimum 05 days before the due date and Contractor have to arrange the working programme accordingly. (ii) The contractor shall quote the rates of items considering above facts also. However no claim shall be entertained at a later stage on this ground.

M&L for preparation of old painted surfaces of arrows letters etc. on roads, pavements runway & like, exc 10cm width and applying one coat of road marking paint white or golden yellow by mechanical means complete all as specified and directed by Engr in charge. Note :- The painted surface shall not show any sign of brush mark or surface underneath. The painting shall stand out boldly. Painting shall be in sufficient number of strokes till the desired result is achieved and shall not shown visible sign of brush marks etc.

M&L for preparation of old painted surfaces of black border of taxi track markings exc 10cm width and applying one coat of road marking paint black in colour complete all as specified and directed by Engr in charge. Note:- The painted surface shall not show any sign of brush mark or surface underneath. The painting shall stand out boldly. Painting shall be in sufficient number of strokes till the desired result is achieved and shall not shown visible sign of brush marks etc.

M&L Cutting, raking out existing sealing compound from Expansion Joints 25mm to 40mm wide X 30mm deep of rigid pavements by mechanical/ hand cutter removing the racked out sealing compound from joints, removing the debris and other foreign materials to a distance exc 50m and n exc 150m, depositing where directed and cleaning the sides and bottom of joints by compressor air (diesel driven compressor of suitable capacity) preparing joints to receive polyurethane joints filling, priming the joints with primer, filling and sealing the joints with suitable polyethylene rod and sealing compound of approved manufactures of Lquiseal PU PG 2K sealant with and incl provn of primer, rod and sealing compound and other materials and tools/ plants as required, complete all as per manufactures instructions as specified and as directed by the engineer-in- charge.

All as per item no.4 hereinbefore but for Construction joint 10 to 12mm wide x 15mm deep specified and as directed by the engineer-in- charge. Notes:- (i)The tenderers are advised to visit the site of work with prior permission of Engineer in charge and fully be aware of the area to be maintained/ repaired. The works shall be executed at time as directed at any time of the day (even after normal working hours). The quoted rate shall be inclusive of this provision. (ii) Application of primer and filling of joints should be done in mechanised manners. (iii) Suitable tape should be provide on both edges of joints to prevent to spreading of joint sealant material and same should be removed after completion of joints filling.

M&L for Complete removal of existing treatment of external wall using water jet, mechanical grinders including rubbing, washing down with water, etc. and applying two coats of weather proof (antifungal) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint and primer shall be as per manufacturer's instruction. The quoted rate shall include cost of scaffolding as required.

M&L preparation of old painted steel surface exc 10 cm width or girth & applying one coats of synthetic enamel paint (white & red in chequered pattern ) complete all as specified & as directed

M&L preparation of old painted steel surface exc 10 cm width or girth & applying two coats of synthetic enamel paint white or golden yellow or red at a height above 10m & upto 20m (V/UHF antenna) all as specified & as directed

M&L for 5mm thick PVC sheet fixed to wooden frame as in DTGM and taxi link markers boards out of premises complete all as specified and directed

M&L for PVC pipe 75mm dia as in supports including necessary clamps etc for DtGM boards complete all as specified and directed

M&L for writing letters of height 110cm with coloured luminious tape complete all as specified and directed

M&L for writing letters of height 85cm with coloured luminious tape complete all as specified and directed

M&L for moorum filling in low level area in layers n exc 25 cm thick, spreading and levelling, consolidation and well ramming including watering complete all as specified and directed.

REIGN CONSTRUCTIONS (BID ID -3070582)