Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Valsad, Pardi, Vapi, Umargam & Nanapondha (Only those villages that were previously included in Pardi & Vapi Taluka) of Valsad District for One Year.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with

latest amendment and 32 mm NB ISI marked medium duty GI Pipe for One Year inTa.

Valsad, Pardi, Vapi, Umargam & Nanapondha (Only those villages that were previously

included in Pardi & Vapi Taluka) of Valsad District.

Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board, Valsad.

Fourth Floor, DK park complex,

In front of Shivam Traders,

Near ST workshop, Dharampur Road,

Abrama, Valsad-396002

Volume III: Price bid Page

NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Valsad, Pardi, Vapi, Umargam &

Nanapondha (Only those villages that were previously included in Pardi & Vapi Taluka) of

Valsad District for One Year.

Schedule showing the material to be supplied from the store of GWSSB for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. Rate Rs. Unit Place of

No. Delivery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled materials

at the rate of current SOR from contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Valsad, Pardi, Vapi, Umargam &

Nanapondha (Only those villages that were previously included in Pardi & Vapi Taluka) of

Valsad District for One Year.

Particulars Qty. Rate Unit Amount Rs.

Providing light commercial (medium) four wheeler Diesel vehicle

on rental basis for one day (particularly for H.P repairing works) Tea

1 with Driver & POL(Per day) (The vehicle shall be fully insured with m

fitness certificate & PUC) with 01 Semi skilled Labour (Per day) &

03 Unskilled Labour (Per day) for year.

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M- 1248 5.56 Set

12x1.75 & Washer 4mm thick

Hex. Bolt M10x1.50x40 mm long 208 2.58 No

Nylock Nut M10x1.50 1748 1.72 No

Handle Axle(Stainless Steel) 228 73.92 No

Washer (4 mm thick) for Handle Axle 0 1.29 No

Bearing (No.6204-Z) 393 27.63 No

Spacer(for pump Head) 2 4.26 No

Chain with Coupling 552 68.32 No

Bolt for front cover M-12x20 mm long 3 2.27 No

A- Pump Head Assly.Consi.of Item No.(1) to (7) as per Fig.3.1 30 1830.08 Set

(B) SPARES FOR CYLINDER

Pump Bucket 2254 4.63 No

Sealing Ring 2289 3.00 No

Upper Valve Assly comp. consi.of item as per fig 3.6 A (Part 5 357.50 Set

Volume III: Price bid Page

Lower Valve Asslycomp.consi.of item as per fig 3.6 B (Part 8 201.25 Set

WATER TANK consi.of item as per fig 3.6 B (1 to 6) 32 601.44 Set

Cylinder With Brass Liner consi.of item (a) & (b) 159 280.32 Set

REDUCER CAP 57 69.54 No

Spares for Conne. Rods

Hexagonal Coupler M-12 x 1.75 x 50mm 14 6.61 No

UPPER VALVE ASSEMBLY SPARES

Upper Valve Seating 75 1.53 No

Plunger Yoke Body 0 111.25 No

Bucket Spacer 0 86.25 No

Follower 0 104.88 No

Plunger Rod (S & S) 49 87.58 No

Upper Valve (Guide) 0 47.50 No

(H) LOWER VALVE ASSEMBLY SPARES

Check Valve Seat 0 80.66 No

Check Valve 0 66.25 No

Check Valve Seating 50 2.29 No

Rubber Seat Retainer 0 36.63 No

Handle Bar consisting of Item no (1) & (3) as per Fig 4.6 26 613.76 Set

Cylinder AsslyComp.consisting of Item no (1) to (7) as per 2 1104.00 Set

Conn. Rod Electro Galva.consisting of Item no (1) to (3) as 951 154.56 Set

Special Tool Kit for I. M.-II HandpumpConsi. Item (1) to (11) 0 6249.60 Set

(L) as per IS 15500 Part-8 with tool box

Standard Tool Kit for I. M.-II HandpumpConsi. Item(1) to 0 6340.32 Set

(M) (16) as per IS 15500Part-8 with tool box

Third plate consisting of Item (1) & (2) as per fig 4.5 0 129.03 Set

(O) Spares for deep well Hand pump-Extra Deep

Cylinder Body with Brass Liner consisting of Item no (1) for 0 525.60 Set

O-1 body fig 5.2 & (2) for brass linear Fig 6.1 B

Volume III: Price bid Page

Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0 1187.20 Set

Upper Valve Assembly complete consisting of Item no (1) 0 570.00 Set

to (11) as per Fig

Follower as per Fig 6.7 0 161.25 No

Bucket Spacer-Lower as per Fig 6.5 0 75.21 No

Pedestal of Telescopic stand 12 1613.76 No

Manufacture Supply & Delivery of ISI Marked 32 mm dia medium

quality galvanized mild steel tubes (Continuously welded electric

resistance welded (ERW)/high frequency induction welded

(HFIW) /Hot finished welded (HFW) type screwed at both ends to

3 IS:554/ 1985 for pipe suitable for water and gas application,

socket on one end and other end protected with plastic thread

protector in approximate length of 3 mtrs conforming to IS:1239

(Part-I) 2004 With latest amendment and socket to conforming to

IS:1239 (Part-II) 1992 With latest amendment

Total Cost for one year (Rs.)

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special

Condition of the Volume II (Technical Bid).

3. Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 2562028.07 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Executive Engineer,

Signature of Contractor

P.H. Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in TaValsad, Pardi, Vapi, Umargam &

Nanapondha (Only those villages that were previously included in Pardi & Vapi Taluka) of

Valsad District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page