Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC VILL SILPATA POST OFFICE PITHORAGARH DISTT PITHORAGARH UTTARAKHAND 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹10.9 L+₹1.7 L (18.9%)Rejected-Finance 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L2 | Rejected-Finance Overall rate are higher than L1 |
Tender Value
₹21.0 L
EMD Value
₹41,980
Closing Date
21 May 2020, 6:00 pmClosed
GE Pithoragarh
GE Pithoragarh
REPAIR MAINT AND POLISHING TO CERTAIN ITEMS OF WOODEN FURNITURE AT MIL STATION PITHORAGARH UNDER GE (MES) PITHORAGARH
2020_MES_340855_1
8289/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
GE Pithoragarh
As per NIT
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹41,980
Yes
23 Jun 2020
25 Apr 2020
23 May 2020
25 Apr 2020
21 May 2020
9 May 2020
Amount
Chair Dining FD-1105/279/203/228 S&F new components of 2nd class HW (Teak) including dismantling unservicable one complete all as shown in drgs and as directed by Engr-in-Charge. all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Rear/front/side rail
(d) Stiffener
(e) Back rest
(f) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(g) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.
Chair Easy FD-1108/229 S&F new components of 2nd class HW (Shisham) including dismantling unservicable one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Arms
(d) Front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and directed
(e) S & F recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(f) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed.
Chair Writing/Chair CB Office with Arms FD-202/ 250/280 S&F new components of 2nd class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Rear/front/Side rail
(d) Arms.
(e) Back rest
(f) Stiffener
(g) S & F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(h) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.
Sofa sets 4/5 seats FD-281 S&F New components of 2nd class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Front Legs
(b) Rear legs
(c) Batterns
(d) Back rail (3 seater)
(e) Front rail (3 seater)
(f) Back rail (single seater)
(g) Front rail (single seater)
(h) Hand rest
(j) Providing new cushion of 32 density cool foam of size 560 x 530x100mm thick complete all as specified and as directed. Make : sleepwell/Feather foam
(k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 250/- per metre.
Preparation of sufaces of following sofa set by throughly rubbing with emery paper, applying raw/burnt seina uniformly from Sofa Set and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater
(b) Sofa set 5 seater
Chair Dinning Cushioned FD/E6/MAP/10 (R) S&F new components of 2nd class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Side/back/front rails
(d) Stiffener
(e) Providing new Cushion of appropriate size of 32 density cool foam complete with dismantling old one as per sample held with GE Make- Sleepwell/Featherfoam.
(f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling old one. Note: Cost of tapestry cloth shall not be less than Rs. 250/- per metre.
(g) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning cushioned and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.
Bed Plywood Top (FD-245 & 246) S&F new components comprising of following outer member made of Teak Wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one all as specified and as directed. (a) Head board
(b) Foot board
S&F new components of 2nd class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Long rail of size 90 x 35 mm
(b) Stiffner of size 60 x 40 mm
(c) Wooden bracket
(d) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one all as specified and as directed. Make of Ply : National/kitply/Greenply.
(e) preparation of the surfaces by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.
Table Dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of 2nd class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top 18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 2nd class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top 18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Teapoy (FD-382/ 232 & 278) S&F new components of 2nd class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table Centre (FD-274 & 235) S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table Peg (FD- 277 & 236/384) S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table 900 x 600 mm with/ without drawer FD- 223 & 224 S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Drawer made of 12mm thick commercial plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish including provision of knob completed all as specified and directed.
(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table 900 x 900 x 760 mm FD-273 S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(d) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Side board FD-372 (a) S & F door shutters (both) made of 18/19mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.
(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish and knob including dismantling unserviceable one all as specified and as directed.
(c) New top made out of 18/19mm thick Pre-laminated particle board with laminated finish duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed.
(d) 3.5mm thick one side teak face plywood on sides (both) including dismantling unserviceable one all as specified and as directed.
(e) Back made out of 6mm thick commercial ply wood including dismantling unserviceable one all as specified and as directed.
(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table writing FD-249 & 275 (a) Top made out of 18/19 mm thick pre-laminated particle board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one
S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (b) Leg
(c) Leg (short)
(d) Side/bottom rail
(e) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified and as directed.
(f) Side made out of 18/19 mm thick partical board one side laminated finish including dismantling unserviceable one all as specified and as directed
(g) Stiffner
(h) Drawer made out of 18/19 mm thick partical board one side laminated finish including provision of knob including dismantling unserviceable one all as specified and as directed. Note :- Knob shall be be aluminium anodised (Steel Colour) CP of approved size and quality
(j) Complete cupboard from the table writing and made of 18/19 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. Note :- (a) Knob shall be aluminium anodized (Dark Brown) CP of approved size & quality. (b) Hinges shall be 50 mm of approved quality.
(k) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table Dressing Gents with mirror FD-230 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directNote : Make of Mirror should be of Modiguard/ST Gobain
(b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.
Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed.Note : Make of Mirror should be of Modiguard/St Gobain
(b) Drawer made of 12mm thick commercial plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.
(c) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Locker Bed Side FD-54(M) (a) CP Handle 100mm of standard quality including dismantling unserviceable one all as specified and as directed.
(b) Hasp & Stapple of standard quality including dismantling unserviceable one all as specified and as directed.
(c) S&F 3.5/4mm thick Teak Face plywood to Top and both sides including dismantling unserviceable one all as specified and as directed.
(d) Partition made of 18/19mm thick shisham wood planks (not more than 3 pieces) including dismantling unserviceable one all as specified and as directed.
(e) Shelf made of 18mm thick shisham wood planks including dismantling unserviceable one all as specified and as directed.
(f) S& F 18/19mm thick prelaminated particle board on front side of the doors (both) including dismantling unserviceable one all as specified and as directed.
(g) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.
Stool Dressing CB (FD-252/374) S&F new components of 2nd class HW (Teak Wood) including dismantling unservicable one Complete all as shown in drgs and as directed by Engr-in-Charge. (a) legs
(b) Stiffeners rail.
(c) Side rail
(d) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(e) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed.
Table Bed Side (FD-248/210/276/157) S&F new components of S&F new components of 2nd class HW (Teak wood) or 18/19mm thick prelaminated particle board mysore teak as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) TOP
(b) Sides
(c) Shelves
(d) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed.
Hat Stand with Mirror (FD- 206 /233 ) S&F new components of 2nd class HW (Teak Wood) or 04mm thick plywood commercial as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Looking Mirror of 5 mm thick. (Make Modiguard/Saint Gobain/Atul)
(b) Complete Board for Hat Stand with Brass hooks and hanger for hanging the Hat Stand as per drawing.
(c) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed.
Bin Soiled Linen (FD- 244/ DB-4073 ) S&F new components of 2nd class HW (Teak Wood) or 18mm thick commercial Particle board one side teak face as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Top
(b) Unsv existing 3.5mm/4mm one side teak face ply wood of back side
(c) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(d) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed.
Chair Wooden Bottom (FD-285 ) S&F new components of 2nd class HW (Teak Wood) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Front Legs
(b) Rear Legs
(c) Stiffeners
(d) Seat (08 mm Commercial Plywood)
(e) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed..
Charpoy Wooden (FD -56/227) S&F new components of 2nd class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Long Rails
(b) Short Rails
(c) 12mm thick Commercial Plywood BWR
(d) Legs
(e) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish all as specified and directed.
Theatre Chair (Make- RANA) (FD - TP) Supply new Arm rest with replacement of old Arm rest for Theatre Chairs of existing Make- Rana for Audotorium (as per sample) as shown in Chair and as directed by Engr-in-Charge including dismantling unservicable one.
JAISWAL ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .