Execution of Civil Zonal works including white washing and Colour washing from USL (Ex) (Excluding BSP Settlement) to AKT (In) including office of the ADEN/Central /BSP & SSE (P.Way)/ BSP under the jurisdiction of Assistant Divisional Engineer/Central/BSP for the period ending 30.06.2027.

C-DSR-2020 (Landscaping & Horticulture) 50000.00 Below/P

H-N.S.Items (Supply of Artisan/Labour) 1846350.00 Below/P

Item Breakup - D-N.S.Items

Supply drinking water by tanker of Per Trip min.5000 litre capacity which can be pumped & filled in railway tanks including transporting, pumping & filling charges, maintenance, fuel charges, manpower regd. all lead & lift and whenever regd. by railway administration (day or night)

Flushing of deep bore well including depth & Each size complete in all respect. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Supply, delivery and stacking of following Each materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. C.I. sluice valve 02 inch dia.

Supply, delivery and stacking of following Each materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. C.I. sluice valve 3 inch dia.

Supply, delivery and stacking of following Each materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. C.I. sluice valve 4 inch dia.

Valve operation i.e. closing & opening of Month valves timely and maintenance of valves at different valve station round the clock including cleaning and dewatering of valve area gland packing of valves with railway materials, closing and opening of valves in proper way and proper time under the super vision of Railway representative. Note : (i) The operation of valve shall be done at exact time as fixed by the Engineer-in charge or his authorized representative under strict supervision of railway representative.(ii) Contractor has to report to SSE/Works office every day at the time schedule fixed by the SSE/Works.(iii) In case of failure to operate/maintain the valve an amount equal to double the schedule rate shall b e deducted from contractor bill.(iii) In case of failure to operate/maintain the valve an amount equal to double the schedule rate shall be deducted from contractor bill. (iv) Unit month should be read as per tank per month.

Trimming of big trees with sizing in logs, Each clearing the site, disposing off the trimmed off leaf & small branches as per direction of Rly.'s representative and stacking the big log's at places shown upto 50 mtrs free lead including all lift with all contractor's tools , plants , labour etc complete. Note: If directed to stack the wooden log beyond 50m lead the separate payment will be made for extra lead under DSR. The trimmed off wooden log to be deposited by contractor in store yard of SSE(Works) as directed. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Desilting of drain works at colony and yard cum and throwing away the sludge at a location identified & as directed with a free lead of 100m. For extra lead payment will be made as per DSR. Note:-A joint inspection shall be conducted by the contractor and Engineer- in-charge or his representative before starting dismantling operations to decide the material to be taken out and return to Railway store at contractor's own cost. Contractors shall be responsible for careful taking out the same and returning in good condition. Any damage, loss shall be charged as per rate fixed by the Railways. In case of any dispute about the useful material, Engineer's decision shall be final and binding.

Execution of following works at colony and cum yard and throwing away the sludge at a location identified & as directed with a free lead of 100 meter. For extra lead payment will be made as per DSR. Desludging of septic tanks.

Supply, delivery and stacking of following Litre materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Liquid chlorine 10% sodium hypochloronate solution.

Supply, delivery and stacking & fixing of Each following materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-Charge or his authorised representative at site. (Prior approval of sample and brand by Engineer- in-Charge is necessary before supply). Chlorine dosing pump

Supplying & fixing of MS sheet of 16 gauge Sqm thickness of approved quality for repair of MS doors and windows by welding/bolting with contractor's material, with one priming coat of red oxide as directed by the Engineer in Charge or his authorised representative at site.

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Check Valve

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Link rod with socket (12mm dia, 3 Mtr. Long). BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Bearing No.6204

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Leather bucket

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Chain Link

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Leather sheet

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. C.I.Cylinder pump for hand pump

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Bucket washer for hand pump 32mm dia

Replacement contractor's approved IS make medium duty type new fittings and depositing the same released fittings to SE(Work)'s depot with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer- in-charge or his authorized representative at site. Top assembly of pump (India Mark-II)

Labour charges only for taking out complete Each tube-well assembly, greasing, painting and re-fitting the damaged parts and lowering the same in position complete as directed by the Engineer-in-charge or his authorized representative at site. The payment of new fittings will be made under relevant item of this schedule. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Septic tank cleaning through sewerage Litre suction truck vacuum cleaning machine provided trucks are used to lift and move materials from one place to another as per site requirement or as directed by Engineer in charge or his authorised representative at site.

Supply, delivery and stacking of following Kg materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Electrode Handomatic L & T make or equivalent (A) 3.2mm.

Drilling 355 mm (14 inch) dia bore by Metre hydraulic rotary drilling ( Direct circulation method ) generally according to ISI specification no. 2800- 1979 but modified to the extent of specification in all kinds of soil and boulders. The cost of stabilizing materials and transportation of rig and other accessories to the site of proposed bore and back from 0 to 90 mtr. below ground level with all labour, boring materials, tools & plants, loading, unloading, all taxes etc complete as per instruction of engineer in charge or his authorized representative at site.

Supply and lowering 200mm dia M.S black Metre pipe 8mm thick E.R.W. with all labour, boring materials, tools & plants, loading, unloading, leading, all taxes etc complete as per instruction of engineer-in charge or his authorized representative at site.

Supply and lowering 200mm dia S.S slotted Metre pipe 8mm thick E.R.W. with slot of size 2/64 inch ( As per sieve analysis) including all labour, tools & plants, loading, unloading, leading, all taxes etc completed as per instruction of engineer in charge or his authorized representative at site.

Supply and packing special screened gravel cum in bore site of size 1/10 inch to 1/18 inch around the liner assembly to the entire depth of boring complete including all labour, materials, tools & plants, loading, unloading, leading, all taxes etc complete as per instructions of Engineer-incharge or his authorized representative at site.

Development of tube well with air Hour compressor of 550 CFM at a working pressure of 600 PSIB including cost of fuel, consumables, store, oil, tools & plants etc complete as per instructions of Engineer-in charge or his authorized representative at site.

Supply, delivery and stacking of following Square materials of approved quality including Foot loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Laminated particle board with two laminated faces as approved by the Engineer-in-charge 12 mm thickness. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Supply, delivery and stacking of following Square materials of approved quality including Foot loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Laminated particle board with two laminated faces as approved by the Engineer-in-charge 18 mm thickness.

Supply, delivery and stacking of following Square materials of approved quality including Foot loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Commercial ply wood 12 mm thick as approved by the Engineer-in-charge.

Supply, delivery and stacking of following Square materials of approved quality including Foot loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Commercial ply wood 18 mm thick as approved by the Engineer-in-charge.

Supply, delivery and stacking of following Kg materials of approved quality including loading, unloading, transporting, lead, lift and all type of taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Synthetic plastic adhesive (Fevicol or similar) as approved by the Engineer-in-charge.

Finishing walls with waterproofing cement Sqm paint(Snowcem) of required shade two or more coats on the old surface with scrapping, washing, cleaning and thoroughly repairing old surface by filling holes, undulations if any, to achieve perfect smooth surface of uniform texture.

Supply of Insta patch (Hot Mix) perfect Kg ready mix bitumen polymer based mixture of stone grit 6-12mm bitumen acticator or for patching repairing. Total 2005648.64

Item Breakup - E-N.S.Items (Rag picking)

Rag picking in mid section beyond station Kilometre limit area for width of 15m along the track including extra space between track at bridge site with contractor's labour, tools and plants etc. Total 159528.00

Item Breakup - F-N.S.Items (Supply items)

15 mm PTMT ( Poly Terephthalate) bib cock

15 mm dia PTMT stop cock(male thread)

PTMT push cock 15 mm dia. ( Poly Tetra Each Methylene Terephthalate)

Full way brass valve with wheel 15 mm dia BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Full way brass valve with wheel20 mm dia

Miscellaneous G I pipe fittings as nipples/ Kg elbows/sockets/ bends for GI pipe work.

Pozzolana Portland Cement (fly ash)

Coarse sand (Minimum zone III )

F.P.S. bricks class designation 7.5

Full way brass valve with wheel 25 mm dia

Unplasticised P.V.C. connection pipe with Each brass union 45 cm long 15 mm bore

Semi Rigid PVC waste pipe for sink and Each wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Galvanised wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm (Mosquito Proof)

G.I. pipes 50 mm dia medium class

G.I. pipes 40 mm dia medium class

G.I. pipes 32 mm dia medium class

G.I. pipes 25 mm dia medium class

G.I. pipes 20 mm dia medium class

G.I. pipes 15 mm dia medium class

Vitreous china orrisa type w.c. pan size 580 Each mm (White)

Stone Aggregate broken : 20 mm nominal cum size

Hydraulic door closer ISI marked (IS:3564- Each 1996)

Anodised Aluminium tower bolt (barrel type) 10 Nos. 300x10 mm

Anodised Aluminium tower bolt (barrel type) 10 Nos. 150x10 mm.

Flushing Cistern P.V.C. 10 litres capacity Each (low level) (White) (with fittings, accessories and flush pipe)

15 mm PTMT bib-cock long body with flange Each

Aluminium paint in two containers

Synthetic Enamel paint in all shades

Oil bound washable distemper / Acrylic Kg distemper

Water proofing cement paint / snowcem

Brass butt hinges (light/ordinary type) : 10 Nos. 125x70x4 mm

Anticorrosive bituminous paint (black)

Plastic emulsion paint

Vitreous china flat back wash basin 630x450 Each mm (white)

Plaster of Paris

Shower rose C.P. brass for 15 to 20 mm inlet Each 100 mm dia

HP. or L.P. ball valve with polythene floats: Each 15 mm dia

H.P. or L.P. ball valve with polythene floats: Each 20 mm dia

H.P. or L.P. ball valve with polythene floats: Each 25 mm dia

Vitreous china 10 litres, low level cistern Each without fittings (White)

Mirror of superior make glass 60x45 cm Each (With 5-6mm thick base complete) Total 683697.05 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Item Breakup - G-N.S.Items

Hiring and operating Multi-Utility vehicle of Each/month loading capacity one MT with sitting capacity of 4/6 persons, 4 strokes, 4 cylinders engine, factory-built metal body, cargo box type or passenger cabin type or both (with 24 hours availability), including cost of fuel, lubricants, major/minor repairs, salary of driver, toll tax, all other tax complete, operation and maintenance including running upto 1200 km in a month. The vehicle shall run on pucca, kutcha road and along the track. The contractor shall arrange road permit for vehicles for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old.

Extra over item no. 021430 for every Kilometre additional km or part thereof over 1200 km in a month.

Hiring of JCB Machine (in good working Hour condition) for levelling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site.

Dewtering of natural or accumulated water HP Hour from any location. Payment to be done for Horse power of pump multiplied by pumping hours Total 990704.64

Item Breakup - H-N.S.Items (Supply of Artisan/Labour)

Supply of Blacksmith 1st class. who know all Per Day Blacksmith related work such as repair of iron door window, also known welding work for repair of steel structure etc. contractor has to ensure that Blacksmith has report to SSE/Works office every day at the time schedule fixed by the SSE/Works.

Supply of Painter. who know all type of Per Day painting work such as door panting, griil painting, gate painting etc. contractor has to ensure that Painter has report to SSE/Works office every day at the time schedule fixed by the SSE/Works.

Supply of Masson. (Who related all mason Per Day related work such as masonry work plastering work , concreting, work fixing and repair of all wall and floor tile). contractor has to ensure that Masson has report to SSE/Works office every day at the time schedule fixed by the SSE/Works. BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Supply of Helper (Technician). Contractor Per Day has to ensure that Helper has report to SSE/Works office every day at the time schedule fixed by the SSE/Works.

Supply of ECR (Carpenter) who know all Per Day type of carpentary work. Contractor has to ensure that carpenter has reported to SSE/Works office everyday at the time schedule fixed by the SSE/Works. Total 1846350.00

Item Breakup - I-N.S.Items

Removing damaged A.P.P., cleaning GI Sqm Gutter surface with machine grinder and repairing of holes and damaged GI Gutter with fibre (smooth) and resin with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer-in- charge or his authorized representative at site.

Providing and applying of two layers of fiber Sqm (smooth) with resin and promoter (clear) and chemical thinner with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer-in- charge or his authorized representative at site.

Providing and applying top coat with gelcoat Sqm and chemical colour and aerosil powder with roller finishing with all lead, lift, loading, unloading, labour, taxes etc., complete as directed by the Engineer-in-charge or his authorized representative at site. Total 494715.00