Annual Electrical Installation Maintenance of Kalyani Court, Kalyani, Nadia for the Year of 2023-24 - Installation of LED compound light, Sign Board, Plug Socket with allied works.

Amount

Supply of 1.1 kV Gr. 2 Core 6 sq. mm XLPE Insulated & Sheathed Armored Aluminum Conductor Cable [Make - Polycab / Finolex / Havells / Universal].

S & F of 32 mm dia medium gauge GI pipe (Make -Jindal/Bansal) protection with necessary fittings and jointing materials as required. [11(b)/F-6]

Labour charge for road cutting/boaring with necessary toos & tackles etc as required.

Laying of 2 core 6 sq. mm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [2(a)/F-1]

Laying of 2 core 6 sq. mm cables after cutting floor/pavement/wall and making holes incl., embedding the cable at an average depth of 75 mm in floor / pavement / wall and mending good the damages to original finish incl. removing the rubbish. [5(i)/F-3]

Laying of one no. 2 core 6 sq. mm cable in underground trench of 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per metre including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. [1(a)/F-2]

Laying of 2 core 6 sq. mm cable through existing GI Pipe. [3(a)/F-1]

S & F of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2 core 6 sq.mm XLPE/PVC armored cables. [7(a)/F-4]

Finishing the end of 2 core 6 sq.mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials. [8(b)/F-5]

Dismantling the existing HPSV fitting with arm bracket, mini pole after disconnection and deposit to store as per direction of EIC. [NS]

Supply of outdoor type LED luminaire [Make - Philips, Type - BRP502 LED117 CW R5C PSU S1 / Wipro, Cat No :- LR02-102-XXX-57-G2].

S & F of GI waterproof type looping cable box (200 mm x 150 mm x 100 mm deep) having 2 mm (14 SWG) thick comprising of one 240 V, 16 A kit-kat fuse unit, one NL on porcelain insulator, lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug embedded on wall including painting with anticorrosive paint and mending good damages. [5 / H-5]

Supply of 240 V, LED Flood Light fitting (Make- Philips, Type - BVP282 LED120 CW FG SY5WB 100W PSU / Wipro, Cat No. LF20-122-060-57-G2). [NS]

Fixing only outdoor / street light type LED light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 Mtr. average length having suitable bend, S&F necy. length of 3 x 1.5 sq. mm PVC insulated single core stranded copper wire and making connections as required and mending good damages to wall incl. painting etc. [18/C-3]

Fixing only Floodlight fittings on wall by 2 nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete with 37 mm x 10 mm MS flat support/or by other means as required. [20(b)/C-3]

S & F of 240 V, 6 A plug socket with separate 6 A piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (21/E-6)

S & F of 240 V, 3 nos. 6 A & 1 no 20 A plug socket with separate 3 nos. 6 A & 1 no. 20 A piano key type switch with indicator & 16 A kit-kat fuse unit (Anchor) on sheet metal switch board embedded in wall incl. S&F of 240 mm X 200 mm X 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm. thick by brass screw and making necessary connection as required. E-7/25

Distribution wiring with following sizes 1.1 KV Gr. single core stranded 'FR' PVC insulated & unsheathed copper wires (Make - Finolex / RR Kabel / Havells) in 20 mm size MMS PVC rigid conduit 'FR' (Precision make) incl. fittings, necy. fixing materials and necy connection as required - [1(a)/E-14]

2 x 1.5 sq. mm + 1 x 1.5 sq. mm ECC

2 x 2.5 sq. mm + 1 x 1.5 sq. mm ECC

Finishing of the 2 x 2.5 sq. mm + 1 x 1.5 sq. mm PVC insulated copper wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [9/F-5]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply of 4 ft ling 18/20 watt polycarbonate body LED T-8 lamp (Make-Philips Master LED tube model no-18W 865 T8 I 2100lm/ Equivalent).

SITC OF GLOW SHINE BOARD: S & F of LED sign board (12 ft. x 4 ft. x 3 inch) frame on the roof, fabricated and through welded by 4 sides 75 mm x 25 mm Mild Steel hollow bar (2 mm thick) and 3 nos 25 mm x 25 mm MS hollow bar (2 mm thick) in broadways, 1 no. 25 mm x 25 mm MS hollow bar (2 mm thick) in longways, 35 mm x 35 mm x 5 mm thick angle iron around four corner for sufficient support and strength. Back side of the frame should be covered by S&F of 20 SWG powder coated blue colour GI sheet. The above structure should be painted with synthetic enamel paint over one coat of RO primer.

S & F of 3 mm thick exterior ACP sheet (Make - Alstone / Aludecor / Times Bond) with approved colour as back ground on front portion of the structure including S&F aluminium angle, screws and all other necessary materials as per direction of the EIC.

Providing CC (4:2:1) base block (Size - 600 mm x 600 mm x 760 mm) with neatly cemented finish (3 mm thick) above the roof.

S & F angle iron (50 mm x 50 mm x 6 mm) having 40 cm length on CC base block, providing hole, two nos. nut-bolts for fixing the board as required.

S & F 40 mm x 5 mm flate iron from top of the board to base block for support the board with necessary welding / nun bolts etc. as required.

S & F of superior quality acrylic three dimensional letters (40 mm rising) of matter flushed on the pre-fabricated existing ACP board. The computerized processed and Laser cutting letter in bold Bengali fonts, milky white in colour, imported sheet should be placed in horizontal line maintaining suitable space with male & female attachments for each letter as per direction of the EIC. Supply & pasting of clear silicon in between the male - female letters to minimize gap for prevent water and insects. The Matter for the signage - মহকুমা দেওয়ানী ও ফৌজদারী আদালত কল্যাণী, নদীয়া. On the top letters, there should be National Emblem of 15 inch height.The matter of the board should be approve from the concerned Authority before construction of the board

S & F of imported, heavy duty, IP-66,12 V DC, 400 Watt SMPS (Make - Meanwell / Union) in suitable enclosure to be fixed in the signage frame for driving total LED system of the signage in a distributed manner for uniform load sharing (parallel connection) in view of long run continuous use including necessary interconnections.

S & F of imported best quality 12 V DC, 1.5 Watt LED modules (Make - Samsung / Osram or as per approve from EIC) having three LED in a single base module, the LEDs would emit mild attractive blue colour light, should be properly fixed in the male part of the Acrylic letters including necessary interconnection by 2 x 2.5 sq. mm cu. wire with socketing & soldering each wire end.

Supply & drawing of 1.1 KV. Gr. PVC insulated 3 core 4 sq. mm copper cable on wall/surface including S & F MS clamp, PVC pipe, making hole etc. as necy. for connection of the Glow sign board and mending good damages as to GS.

RONY ENTERPRISE

BARAI ENTERPRISE