SPL REPAIRS FOR REPLACEMENT OF SUMMER APPLIANCES (WINDOW ACs DESERT COOLERs AND VOLTAGE STABILIZERS) AGAINST BER ITEMS AND PROVN OF STATIC WATER TANK OF CAPACITY 150 KL AT FOL DEPOT UNDER GE ARMY NO 1 JODHPUR

Amount

Surface dressing not exceeding 15 cm deep and getting out in any type of soil, complete all as specified and as directed .

Excavation over areas not exceeding 1.5m in deep and getting out in any type of soil complete all as specified and as directed.

All as per item No. 2.00 here-in-above, but depth exceeding 1.50 m not exceeding 3.00 m

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed .

M&L for plain cement concrete 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M&L for 100 mm thick plain Cement concrete, 1:3:6 type C1 by using 20mm graded stone aggregate, as in plinth protection finished even and smooth without using extra cement including necessary form work laid in alternate bays and filling the joints with bitumastic filler complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate,, as in subbase, flooring, hardstanding, complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces , finished even and fair using water proofing compound, complete all as specified and directed. NOTE:- Water proofing compond shall be measured and paid seperately under respective item of this Schedule.

M&L for Pre-cast cement concrete block masonry using PCC, 1:2:4, type B-1 solid blocks, not exceeding 10 cm in width and setting in Cement Mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash on wall complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or floor or fixed to walls with and including MS clamps complete all as specified and as directed.

S&F Bib taps, brass, 15 mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.

S&F ball valves for 20mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

S&F in replacement of GI tubing 25mm bore medium grade (ISI Marked) with all GI fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Use and waste formwork to side and soffits of slabs such as wall, roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed.

M&L for RCC M-25 design mix as in static tank wall and base & etc., complete all as specified and as directed.

M&L for TMT steel bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F rolled mild steel sections of grade Fe - 410 - S as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, and running rails and guides for sliding doors; fixed with angle cleats etc complete all as specified and as directed.

M&L for prepainted Galvalume Aluminium Zinc Coating GI based corrugated Steel Sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed .

M & L PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and as directed.

M&L for Welded steel wire fabric not exc. 4 kg supplied and fixed complete to wood or steel members

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Supply only water proofing compound, ISI Marked, complete all as specified and directed.

Supply, installation, testing and commissioning of 1.5TR Window type Air-conditioner fitted with hermetically sealed rotary/reciprocating compressors operating on Refrigerant R-32/non CFC confirming to IS:1391 (Part-1)/92 (Amdn.1) suitable for operation on 230V, 50 Hz Single phase, A.C power supply capable of performing; Cooling, Dehumidifying, Air Circulating & Filtering(both Dust and Anti-Bacterial). EER : Shall be more than 5.2 (W/W), Air Filters : 90% efficiency, filtering down to 10 micron size, washable HDPE air filters, Star rating : latest BEE 5 STAR, Nominal cooling capacity: Not less than 4500 Kcal/hr (or)1.5 TR, complete all as specified and directed.

Supply, installation, testing and commissioning of 2.0 TR Window type Air-conditioner fitted with hermetically sealed rotary/reciprocating compressors operating on Refrigerant R-32/non CFC confirming to IS:1391 (Part-1)/92 (Amdn.1) suitable for operation on 230V, 50 Hz Single phase, A.C power supply capable of performing; Cooling, Dehumidifying, Air Circulating & Filtering(both Dust and Anti-Bacterial), EER : Shall be more than 5.2 (W/W), Air Filters : 90% efficiency, filtering down to 10 micron size, washable HDPE air filters, Star rating : 3 STAR and above rated, Nominal cooling capacity: Not less than 6000 Kcal/hr(or) 2.0TR, complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, 100% copper winding & designed for input variation between 140 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, 100% copper winding & designed for input variation between 140 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA, complete all as specified and directed.

Supply, installation, testing & commissioning of steel body desert cooler electric driven(single Phase), sheet thickness Minimum 18 Gauge, single phase having nominal air flow capacity of 5000 Cum per hour, Honey Comb Pad, complete all as specified and directed by Engg-in-charge. Make of cooler- SIMRAN STEEL/ SAGAR/ SYMPHONY/ KHAITAN. Make of Fan Motor: Crompton/ Khaitan/ Cool Home/ SYMPHONY and Make of water Pump: ZOLTA Khaitan/ CG/ Cool Home/ Kenstar/ SYMPHONEY

NOTE:- (a)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount. (b)- JOBWISE DETAILS AS BELOW:- (i)- 25 / LBW/JODH/2023-24 - ITEM NO. 1.00 TO 29.00 (ii)- 005/SR (M&O) / JODH/2023-24 - ITEM NO. 30.00 TO 33.00

Narendra General Suppliers

M/S KAUTILYA GARG

KAVYA ENTERPRISES

M/S SHREE BHAIRAV NATH ENTERPRISES