PROVISION FOR REPLACEMENT OF LT PANEL AT 835 SQN CG HANGER, P-3 AND P-4 BUILDING, ADMIN BUILDING, OPEN THEATRE, RUNWAY GATE, GALLEY AND MT SECTION WITH CONNECTED EM ITEMS AT RESTRICTED AREA AT ICGAE PORBANDAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (in door type) with Cu busbar 800Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following: :- Make:- BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 630 Amps four pole with Microprocessor based release, having breaking capacity 36 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) Outgoing MCCB 200 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Legrand/Siemens

(c) Outgoing MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Legrand/Siemens

(d) Outgoing MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---02 No. Make:-ABB/C&S/Legrand/Siemens

(e) MCB TPN 4 Pole, 415 Volt 32 Amps - 4 Make:-ABB/C&S/Legrand/Siemens

(f) Digital Voltmeter 0-500 V 96x96m---01 nos.

(g) Digital Ammeter 0-500 A 96x96m---01 nos.

(h) Indicating Lamps set RYB----01 set

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (in door type)with Cu busbar 400Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following: Make:- BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 315 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) Outgoing MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---0 No. Make:-ABB/C&S/Legrand/Siemens

(c) Outgoing MCCB 100 Amps four pole with thermal based release, having breaking capacity 25 KA, ---02 No. Make:-ABB/C&S/Legrand/Siemens

(d) Outgoing MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Legrand/Siemens

(e) MCB TPN 4 Pole, 415 Volt 32 Amps - 4

(f) MCB DP , 230 Volt 32 Amps - 1

(g) Digital Voltmeter 0-500 V 96x96m---01 nos.

(h) Digital Ammeter 0-500 A 96x96m---01 nos.

(j) Indicating Lamps set RYB----01 set

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (in door type)with Cu busbar 200Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following: Make:- BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) MCB TPN 4 Pole, 415 Volt 63 Amps - 5 No Make:-ABB/C&S/Legrand/Siemens

(c) MCB DP , 230 Volt 6-32 Amps - 6 No

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 300 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 200 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) Outgoing MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Siemens/Legrand

(b) MCB TPN 4 Pole, 415 Volt 63 Amps - 2

(c) MCB SPN , 230 Volt 20 Amps - 1

(e) Digital Voltmeter 0-500 V 96x96m---01 nos.

(f) Digital Ammeter 0-500 A 96x96m---01 nos.

(g) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 200 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 125 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) MCB TPN 4 Pole, 415 Volt 63 Amps - 3

(b) MCB TPN 4 Pole, 415 Volt 32 Amps - 1

(c) MCB SPN , 230 Volt 20 Amps - 1

(c) Digital Voltmeter 0-500 V 96x96m---01 nos.

(d) Digital Ammeter 0-500 A 96x96m---01 nos.

(e) Indicating Lamps set RYB----01 set

Supply. Installation & commissioning of factory made,CPRI approved manufacturer, self supporting totally enclosed LT Panel Board (outdoor type)with Cu busbar 400Amp with 100% neutral, 3 phase, 4 wire with color code heat shrinkalble sleeve and SMC/DMC type supporting insulator confirming to IP-55 compartmentalized design, dust & vermin proof for 440 Volt 3 phase 4 wire system madeup of GI sheet of 2.0 mm thick built upin rigid frame work having front and rear hinged door with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip point and ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having control circuit diagram with colour code solid conductor copper 1.5 sqmm cable for easy identification including Incoming/ Outgoing cable entry provisions, embeded with 50x6mm mild steel angle Iron frame and 200 mm above the normal ground level complete with PCC foundation in cement concrete 1:2:4 (20mm graded stone aggregate) and testing after installation including taking down unserviceable LT panel board complete all as specified and comprising with the following. Make:BCH/Ascent Engineer(C&S)/Sigma control system(Legrand)

(a) Incoming MCCB 250 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No Make:-ABB/C&S/Legrand/Siemens

(b) Outgoing MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---04 No. Make:-ABB/C&S/Legrand/Siemens

(b) MCB TPN 4 Pole, 415 Volt 63 Amps - 2 No Make:-ABB/C&S/Legrand/Siemens

(c) MCB DP , 230 Volt 6-32 Amps - 2 No Make:-ABB/C&S/Legrand/Siemens

(d) DOL Dtartar 10 HP - 02 Nos

(e) Digital Voltmeter 0-500 V 96x96m---01 nos.

(f) Digital Ammeter 0-500 A 96x96m---01 nos.

(g) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 300 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 200 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) Outgoing MCCB 100 Amps four pole with thermal based release, having breaking capacity 25 KA, ---04 No. Make:-ABB/C&S/Siemens/Legrand

(c) MCB DP , 230 Volt 63 Amps - 2 No

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Aluminium bus bar 200 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Siemens/Legrand

(b) MCB TPN 4 Pole, 415 Volt 32 Amps - 2 No

(c) MCB DP , 230 Volt 32 Amps - 3No

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Aluminium bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 100 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) Outgoing MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---03 No. Make:-ABB/C&S/Siemens/Legrand

(c) MCB TPN 4 Pole, 415 Volt 32 Amps - 3 No

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 300 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a) Incoming MCCB 160 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) Outgoing MCCB 100 Amps four pole with thermal based release, having breaking capacity 25 KA, ---02 No. Make:-ABB/C&S/Siemens/Legrand

(c) Contactor for front & reversu moving gate 05 HP

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including Aluminium bus bar 200 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Make:-Hensel/Hager/Schneider

(a)Incoming MCCB 100 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No. Make:-ABB/C&S/Siemens/Legrand

(a) Outgoing MCCB 63 Amps four pole with thermal based release, having breaking capacity 25 KA, ---01 No Make:-ABB/C&S/Siemens/Legrand

(b) Contactor for front & reversu moving gate 05 HP

(c) MCB SPN 4 Pole, 415 Volt 32 Amps - 2 No

(d) Digital Voltmeter 0-500 V 96x96m---01 nos.

(e) Digital Ammeter 0-500 A 96x96m---01 nos.

(f) Indicating Lamps set RYB----01 set

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 Core 16 Sqmm. Make : Havells/Polycab/RR Cable.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 25x4mm dia galvanised iron strip all as shown in SSR -I Plate No. 2 to the earthing test point and suitable chamber with CI cover and all as specified and indicated including testing on completion. Note : IR value should be less than 5 Ohms.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth and getting out soft/Loose soil and including taking out PCC cable cover and getting out complete all as specified and directed.

returning filling in incl spreading levelling watering and well Ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Supply and Lay in replacment of OD 50mm Double Wall Corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall for protection of underground Cable with all fittings laid in trenches/road/nallah or fixed along wall poles or laid under floor for the following dia (Excavation and earthwork shall be measured and paid separately) complete all as specified and as directed. Make: Rex/Poly/Geminie (i) Fixing accessories for pipe laying such as clamps and nut bolts are to be included in quoted rate.

Note:-for Item 1.00 to 11.00: 1. The contractor should take proper shutdown for replaxcemnet of LT panel and make necessary standby arrangement without any interuption. 2. The contractor will make PCC foundation in cement concrete 1:2:4 (20mm grade Aggregate) and testing and installation of entire system will be as per OEM guidelines. 3. The cost of cable lugs anfd necessary connecting materials for existing cable size for connecting in LT Panel is deemed to be included in unit rate.

roxy enterprise

RAJESH ENTERPRISE

K B N TRADERS

jitendra c joisar

shree chamunda enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO

OM ENGINEERING

fakhrie apostrical