General-Vikasbhavan Section- Arrangements for setting up a new conference hall for Architecture Wing at Public office Main building Thiruvananthapuram-Civil work

Civil Works

15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.13.2:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

6.4.1:Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

OD109747/2025-2026:Providing and fixing 12 mm thick Marine plywood for partition & wall Panelling , to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

OD109827/2025-2026:Laminate panelling : Providing and fixing Premium quality laminates sheet 2 mm thick on to the existing plywood using adhesive complete as per the direction of engineer in charge including all the cost of accessories, labour charge etc complete (data based on 9.126.1 of DAR )

12.45.2:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)

OD257758/2025-2026:Laminate panelling : Providing and fixing Premium quality Pin board - Premium fabric cased over 12 mm soft boards fixed existing plywood using adhesive complete as per the direction of engineer in charge including all the cost of accessories, labour charge etc complete (data based on 9.126.1 of DAR )

OD109736/2025-2026:Providing and fixing of external wall system on Light gauge steel frame work with (One side covered with 9mm Cement board). Outer face 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately).

OD123521/2025-2026:Providing and laying floor finish with superior quality polished imported wooden SP( Stone Plastic) Composite panel flooring, 1390mm x 120mm x9mm size of nearest size, SP composite panel of AC4, or approved equivalent make it should have water resistance, abrasion resistance, impact resistance, fire resistance, slip resistance etc. , and the panel tongued and grooved in flooring after cleaning and levelling the surface thoroughly and fixing 3mm thick or nearest size polyurethane foam as per manufacturer & specification , including cutting the panel to the required size and fixing with silicon sealant for the edges and iron screws etc. complete including providing edge beading and skirting and finishing the top edge of the skirting as per the directions of the Engineer in charge, the rate includes cost and conveyance of all materials to site, labour charges etc complete.

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.83.2:Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

OD109741/2025-2026:Fabricating, supplying, and fitting Titanium Gold letters (English / Malayalam) for the name board with bolts and nuts, drilling and fixing to the panel. with synthetic resin adhesive to correct line and levels as per the direction of Departmental Engineer. Letters made of 1 mm braze sheet. having a height of 100 mm and a projection of 25 mm from the base

OD257648/2025-2026: Fabricating, supplying, and fitting Titanium Gold letters (English / Malayalam) for the name board with bolts and nuts, drilling and fixing to the panel. with synthetic resin adhesive to correct line and levels as per the direction of Departmental Engineer. Letters made of 1 mm braze sheet. having a height of 180 mm and a projection of 25 mm from the base

OD109746/2025-2026:Providing and fixing " Govt of Kerala " Emblem of Titanium Gold colour made up of braze sheet of 1 mm thick and Projected Emblem of height 250 mm with bolts and nuts, drilling and fixing to panel background with proper line and level, including all labour, material and installation etc complete, as per the direction of engineer in charge.

9.20.2:Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (Copper oxidized as per IS : 1378).125 mm

OD125307/2025-2026:Providing and fixing Cable manager as per directions by the Site Engineer in charge etc complete.

OD125429/2025-2026:Supplying ,stitching and fixing Solid Blackout curtain (9feet) complete light block thermal insulated & Noise Reducing Room Darkening curtains in position including cost and conveyance of all materials, stitching frills, necessary folding using strip and hooks including all cost of materials and labour charges etc. complete as per the direction of Engineer in charge.

14.28.2:Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter

9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

50.9.15.3:Providing and fixing iron hooks and eyes : 200mm.

OD126693/2025-2026:Engaging carpenter for various carpentry works

OD109744/2025-2026:Labour engaged engaged for removing the waste materials in convenient place and other petty works etc complete.

Appendix A - Furniture

OD201246/2025-2026:Supplying of Medium back Mesh chair - AN MESH -70 with head rest , self calibrating multiblock mechanism Adjustable Lumber Support One way Adjustable Arms (Height), Nylon Base Fabric Upholstered Cushion seat, all conveyance labour charges etc complete.

OD201247/2025-2026:Supplying of Medium back Mesh chair - AN 70 Mesh with head rest , self calibrating multiblock mechanism Adjustable Lumber Support One way Adjustable Arms (Height), Nylon Base Fabric Upholstered Cushion seat, all conveyance labour charges etc complete.

OD201260/2025-2026:Conference table (5400x1050) - Gable End 5400 x1050 Table Top - 25 mm Thick prelaminated Particle Board with 2mm PVC Edge Lipping on All exposed Edges support - Under structure Gable end legs wire management 450mm Aluminium Flip up with Soft closure And provision to Mount Switches and Sockets on Cable Tray and intermediate Leg with Wire Entry

Please Enable Macros to View BoQ information