Lighting of passage from main gate to third block at ladies hostel of NITC

Amount

Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 6 sq. mm + 2 X 6 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing of 20mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.(GroupC)

Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MOB TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.

Supplying and fixing 40A, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable forFor 4 way, Double door TPN MCBDB triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) .site visit recommended.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Supply of excel earthing compound or its equivalent etc.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35sq.mm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supply and laying of 4 inch 80 NB GI pipe (medium class B) on ground with all accessories like socket, bend, couplers with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., and making good the damages of road with concrete mixture of 1 : 2 : 4 including watering & ramming etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 2*6sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4*16sq.mmof PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and laying of 63mm dia DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supply, conveyance, installation, testing and commissioning of 9W LED garden light and anthracite color (Dimensions 170x170x210 mm) with IP65 directly on Floor including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make Slide Post Grey model No. 800019 with 9W B22 Led Bulb or Techno commercial equivalent.

Supply, conveyance, installation, testing and commissioning of 9W LED Gate light and Black body with smoky black glass (Dimensions 185 x 185 x 230 mm) with IP65 directly on Floor including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make Atrium Outdoor Post model No. 800023 with 9W E27 Led Bulb or Techno commercial equivalent.

Supply, conveyance, installation, testing and commissioning of 10W LED 2 way wall washer light, Black color (Dimensions 145x87x43 mm) with IP65 directly on wall including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make Radiant Two-way Wall Washer 10W model No. 582061 or Techno commercial equivalent.

Supply, conveyance, installation, testing and commissioning of 12W LED surface down light (Dimensions 205x205x54 mm) with IP65 directly on ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire onforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. Philips make IP65 LED Surface Light 12W or Techno commercial equivalent.

Supply and laying of one number of 12 SWG good quality bare copper wire for loop earthing along with existing XLPE insulated aluminium cable as required.

Supply and laying of one number of 8 SWG good quality bare copper wire for loop earthing along with existing XLPE insulated aluminium cable as required.

Supplying of one number 2Cx 6 sq mm Aluminium condutor XLPE insulated PVC sheathed power cable of 1.1 kV grade etc. as required.

Supplying of one number 4Cx 16 sq mm Aluminium condutor XLPE insulated PVC sheathed power cable of 1.1 kV grade etc. as required.

Supplying and fixing of weather proof outdoor junction box for outdoor installation of size 155mm x 210mm x92mm with knockouts for cable entry including dinbar, suitable connectors for connecting Al cable to copper cable of suitable size, , weather proof gourmets,glands,clamps,screws of required length fastners connections for surface/ recess fixing on existing wall etc. as required(clip type)Hensel IP 66 DK1610G made or Equivalent.

Supplying and fixing of weather proof outdoor junction box for outdoor installation of size 455mm x380mm x205mm with knockouts for cable entry including dinbar, suitable connectors for connecting Al cable to copper cable of suitable size, , weather proof gourmets,glands,clamps,screws of required length fastners connections for surface/ recess fixing on existing wall etc. for enclosing timer and contactor etc. as required(clip type)Sintax GSJB 4030 made or Equivalent.

Supply,fabrication and fixing of outdoor cubical type water proof box(suitable size) with raincap on top,made out of 2mm thick MS sheet ,powder coated in suitable color over a coat of primer with provision for fixing vertical 4 way VTPN DB -1 No with sufficient clearance from all the sides and a contactor and timer box with detachable gland plate at bottom having a double door with lockable knot providing danger notice board on front door,fixing using suitable size 'C' channel including all minor civil works etc. as required(site visit recommended).

Electrical Schematic drawing in Autocad and pdf format along with physical copy of the same for Electrical inspectorate approval (along with seal,signature and license details of A class contractor) and complete assistance in obtaining the necessary approval from the Electrical inspectorate, ensuring that all compliance requirements and procedures are properly followed etc as required.

Supply and fixing ,testing and commissioning 24 Hour Digital Time switch (crono)for operating automatic ON-OFF function 110 - 240 VAC 1 C/O Base/DIN 25 ON/OFF Each,L&T 67DDT0 or equivalent.

Supplying ,Installation ,Testing and Commissioning of 3 pole power contactor,Type MNX40,240V coil voltage.

DIAMOND ENGINEERING WORKS (BID ID -3248613)

LAMOS TECHNOLOGY SOLUTIONS PVT LTD (BID ID -3248037)