Miscellaneous Work Gym Cum Yoga Hall Centre and Nagarpalika Office Building and at Various Location in Bharuch Under Swarnim Jayanti Mukhyamantri Shaheri Sadak Yojna (Saving Amount) Year 2024-25.

NAME OF WORK :- MISCELLANEOUS WORK GYM CUM YOGA HALL CENTRE AND NAGARPALIKA OFFICE

BUILDING AND AT VARIOUS LOCATION IN BHARUCH

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage

(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender

works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 57,84,658=00 Put to Tender Rs. 57,84,658=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consulting Engineer Electrical Engineer Municipal Engineer Chief Officer

" DESIGN POINT " Bharuch Nagarpalika Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

DIST :- BHARUCH

NAME OF WORK : Providing, Supplying and Installing Electric Work For Gym Cum Yoga Hall Centre and

Nagarpalika Office Building at Bharuch

"SCHEDULE : B-1"

PERCENTAGE RATE TENDER

Description Quantity Rate Per Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 60.00 2335.12 Mtr.

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 100.00 4471.27 Mtr.

Point wiring for on board looped PLUG with tissino type single pole

ISI marked Switch and Socket erected with necessary connections

erected on wooden /Metal/ PVC Box covered with 3 mm thick 50.00 195.94 Pt.

PC(Polycarbonate) /Acrylic sheet for open / concealed wiring for

following size. [B] For 16 Amp.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive 504.00 33.33 Mtr.

solution & Clamps with following dia of pipes, in approved manner as

directed (b) 25 mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm 540.00 47.47 Mtr.

(e) One wire 6.00 sq. mm 450.00 70.70 Mtr.

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(C) for 1.7 to 2 ton capacity - Premium Cat. 10.00 61989.76 Each.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

Description Quantity Rate Per Amount

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(i) above 20 to 30 watts

Supplying & erecting approved make 230 V , 50 Hz Operating

Voltage low noise decorative Roof Mounting Exhaust fan having

square frame and Slitted guard with mounting accessories,

necessary pipings and fittings.

Supplying and erecting approved make double ball bearing oscillating

type Heavy duty bracket fan with Aluminium Blades A.C. 23OV.

50cy/s wall mounted with height adjustment and rotary tilting device

complete with guard, wall bracket,mounting accessories as directed.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 3.00 5760.03 Ea.

Back filling Compound :1 no. Bag of 25 Kg.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface as

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in

existing trench for laying of cable. below ground / road surface for

enclosing cable

(C))90 mm outer dia 160.00 95.95 Mtr.

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary inlet

& outlet connection. The body of water cooler will be made from

Stainless Steel.

Description Quantity Rate Per Amount

Supplying & erecting reverse osmosis (RO) water purification system

with M.S. powder coated pedestal frame, prefilter housing carbon

filter suitable buster DC pump, auto low & high pressure switches

with following size of LPH capacity & erected as directed

[D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @

2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1

No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump

500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane 2.00 77891.20 Each.

housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x

1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.A -Cat. III)

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. A -Cat. III

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. (a) -Cat. III)

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules 5.00 309.06 No.

erected on / in wall / ceiling with following type accessories. Cat. III

Description Quantity Rate Per Amount

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type

of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (a) -

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 300.00 78.78 MTR

(d) 3 wire 2.5 sq. mm 220.00 128.27 MTR

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark.

Cat.III 18.00 123.22 No.

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)

(b) sheet steel double door

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit

415/500 V. with HRC fuse of suitable load and neutral link confirming 2.00 13353.21 Each.

to IS (c) 300 A/315 A/325 A Cat.III

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 1.00 22088.70 Each.

suitable for 250 AMP TPN MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs should be used of same

company of MCB to be used) (D)12 way outgoing

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

16 G.M.S.housing Cat-ll

Description Quantity Rate Per Amount

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all 6.00 6790.23 Each.

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (c)63 Amp. Cat III

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete 400.00 3.95 Litre.

Total Amount Rs.

Total Amount Rs.

Consl. Engineer Electrical Engineer Municipal Engineer Chief Officer

"DESIGN POINT" Bharuch Nagarpalika Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch Bharuch

BHARUCH NAGARPALIKA - BHARUCH

NAME OF WORK : PROVIDING, ERECTING & INSTALLATION OF STREET LIGHT POLES

LOCATION : VARIOUS LOCATION IN BHARUCH MUNICIPALITY'S GARDEN , AT BHARUCH

"SCHEDULE : B-2"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Per Amount

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] 200.00 357.54 Rmt

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene (conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

(A)50 mm outer dia 2059.00 62.62 Nos.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

(E) 3 core 2.5 Sq. mm 335.00 171.70 Mtr.

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(ii) above 48 to 59 Watts 67.00 4248.06 Ea.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(C) 4 core 10 Sq. mm 1876.00 168.67 Mtr.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 25 Sq. mm 260.00 229.27 Mtr.

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Item No. & Description Qty. Rate Per Amount

Cat.III 67.00 297.95 Nos

Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 10.00 6790.23 No.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams)

The panel shall be supplied with following approved

manufacturers with following size

(B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory

(i) with 350mm depth 7.50 14902.55 Sq mtr.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be

submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 5.00 5760.03 Nos.

Back filling Compound :1 no. Bag of 25 Kg.

Item No. & Description Qty. Rate Per Amount

Supply of approved make FRP Pole having following

specifications: FRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in

one piece and tapered round in shape, having smooth finish

and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP

Anchor Base and it should be heavy duty, or MS Material duly

painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used

shall be I-JV resistance and pigmented. A highly weather

resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper

adhesion of the paint. Minimum coating thickness shall be

to 100 micron. Deflection of the pole shall not exceed more

than 10% of the length of pole for the given load" Pole should

be generally made as per the dimensional data, performance

criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01

including cable termination box with necessary accessories .

The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[D] Overall length of 4 Mtr. Average Thickness: 7mm. Top/

Bottom OD Dia AIF 89/145 mm ± 2mm approx. Approx.

Weight of Pole 19 kg approx. (Without Base) Anchor Base

Size 250X250 & 12mm th.

Providing FRP/GRP arm bracket of having 15' arm with 50 mm

OD pipe *5 mm thk,1000mm 10 from le centre

(A) Single Arm bracket 67.00 2186.65 Nos.

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display. Also 5.00 3168.37 Nos.

comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III

Providing and erecting Pipe type earthing with 40 mm dia

mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail

for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth

bolt of following size of box

(A) 300mm x 200mm x 100mm [deep] 67.00 898.90 Nos.

Item No. & Description Qty. Rate Per Amount

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Total Amount Rs. ..............

Total Amount Rs. ..............

Consl. Engineer Electrical Engineer Municipal Engineer Chief Officer

"DESIGN POINT" Bharuch Nagarpalika Bharuch Nagarpalika Bharuch Nagarpalika

Amreli Bharuch Bharuch Bharuch

BHARUCH NAGARPALIKA BHARUCH

DIST. : BHARUCH

NAME OF WORK : Miscellaneous Work Gym Cum Yoga Hall Centre and Nagarpalika Office Building at

"SCHEDULE : B-3"

PERCENTAGE RATE TENDER

Item No. & Description Qty. Rate Unit Amount

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 300 x 550 x

mm of M200 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Providing erecting and supplying of Hedge Trimmer

electric machine Weight 4 Kg. Blade Length 24"

inch, Cable Length 20 MTR Power 600 WATT, 1.00 14170.30 Each.

including of all cost of transportation and taxes as

per engineering charge

Providing erecting and supplying of Grass cutting

electric machine Power 2500 Watt, Motor type

copper winding, Cutting Hight adjustment centre 12-

100 mm grass colectore capacity 60 litter including

30 meter 2.5x3core electric cabel Weight 33 Kg.

cutting width 21" inch, including of all cost of

transportation and taxes as per engineering charge

Providing Hexagonal Cement Concrete pots of

specified size Full Length 38 inch, Height 24 inch,

width 38 inch as per design, including required form

work, finishing with cement punning on exposed 20.00 4413.70 Each.

surface, curing for specified period and stacking in

required rows & height, all complete as per direction

of Officer-in-charge.

Providing and Supplying Tree Guard Size 800 x

x 75 mm, Inner Dia-500 mm including of labour

transportation loading, unloading and Installation on 20.00 2323.00 No.

site as per Site in Charge etc. complete.

Item No. & Description Qty. Rate Unit Amount

Providing and Supplying Portable Security Cabin

Size 4' x 4' including of labour transportation

loading, unloading and Installation on site as per

Site in Charge etc. complete.

Generator Platform

Civil work of foundation & Fabrication and Structural

work for Roof suitable for 160KVA Diesel Generator 1.00 202000.00 Job.

set as per desi n rovidin b EIC

Civil Work (Yoga Hall)

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Providing 20mm thick cement plaster in single coat

on single or half brick walls for interior plastering

upto floor two level and finished even and smooth in

(ii) Cement mortar 1:4 (1 cement :4-sand)

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick

Item No. & Description Qty. Rate Unit Amount

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame

as per details etc

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm

@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for.window

Providing & Installing of Premium rubber tile size

1000 x 1000 x 30 mm PVC sport flooring, made

from polyvinyl chloride,offers excellent elasticity,

anti-slip properties, and durability, ideal for indoor

sports like basketball and gyms. It is eco-friendly,

easy to maintain, and provides a safe, comfortable

surface for athletes.

Shock Absorption:

Provides excellent cushioning and impact

resistance, reducing the risk of injuries during high-

intensity activities.

Surface Elasticity:

Offers optimal ball bounce and foot traction,

enhancing athletic performance.

Highly resistant to wear, scratches, and heavy foot

traffic, ensuring long-lasting performance.

Slip Resistance:

Textured surface ensures superior grip, minimizing

the risk of slips and falls.

Noise Reduction:

Absorbs sound and reduces noise levels, creating a

quieter environment for sports and activities.

Easy Maintenance:

Smooth, non-porous surface allows for easy

cleaning and disinfection.

Item No. & Description Qty. Rate Unit Amount

Water Resistance:

Fully waterproof, making it suitable for indoor and

outdoor sports facilities.

Chemical Resistance:

Resistant to stains, oils, and cleaning agents,

maintaining its appearance over time.

Customizable Designs:

Available in various colors, patterns, and line

markings to meet specific sports requirements.

Quick Installation:

Format in rolls allow for fast and efficient installation.

Many PVC sports floors are made from recyclable

materials and are low in volatile organic compounds

Suitable for a wide range of sports, including

basketball, volleyball, badminton, and gym activities.

Total Amount Rs.

Total Amount Rs.

Electrical Engineer Municipal Engineer Chief Officer

Bharuch Nagarpalika Bharuch Nagarpalika Bharuch Nagarpalika

Bharuch Bharuch Bharuch