Renovation/ repairing of Service road of Mughalsarai-Chahaniya Main road to Switch Yard of Bhupauli Pump House

WBM G-2 Providing, laying, spreading and compacting stone aggregates of specific sizes (45mm to 63 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 Tonnes in stages to proper grade and camber, applying & brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. MORD specification clause 405

WBM G-3 Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4mm to 53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 Tonnes in stages to proper grade and camber, applying & brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. MORD specification clause 405

Providing and Laying Primer coat with bitumen emulsion (Slow setting 2) on prepared sufrace of granular base including cleaning of road sufrace and spraying primer @ 0.75 kg /sqm using mechanical means as per MORD specification 502

Providing and applying tack coat with Bitumen emulsion using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with Hydraulic broom as per MORD Specification 503.

Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tones/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades by Paver Finisher as per Tehnical Specification Clause 510

Providing and laying of premix sand seal coat type B with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. as per Tehnical Specification Clause 511

Brick edging on both side of road first class brick 8 cm wide and 12 cm deep laid with mud morter including cost of all material labour T&P etc complete. Ref. to specification no 765