Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹19.0 LAccepted-AOC MIG 330 MADHAVADHARA VUDA COLONY VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | 1 | Accepted-AOC Being Lowest Bidder | |
| 2 | 2₹22.0 L+₹2.9 L (15.2%)Rejected-Finance | 2 | Rejected-Finance Not Being Lowest Bidder | |
| 3 | 3₹22.6 L+₹3.5 L (18.2%)Rejected-Finance | 3 | Rejected-Finance Not Being Lowest Bidder | |
| 4 | 4₹25.7 L+₹6.7 L (34.9%)Rejected-Finance | 4 | Rejected-Finance Not Being Lowest Bidder |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
17 Jul 2024, 6:00 pmClosed
Shri Azmat Arshi, IDSE, Garrison Engineer P Navy K
Garrison Engineer P Navy Kalinga, INS Kalinga Complex, INS Kalinga Post, Visakhapatnam - 531 163
Maintenance Repairs to Wood Furniture at Naval Station, Bheemunipatnam
2024_MES_660647_1
8103 / E8
Open Tender
Civil Works
Item Rate
270 days
Visakhapatnam
Class D
Category d i
9 documents required · 9 mandatory
₹500
Garrison Engineer P Navy Kalinga
₹52,000
Yes
13 Sept 2024
19 Jun 2024
24 Jul 2024
19 Jun 2024
17 Jul 2024
3 Jul 2024
19 Jun 2024 - 26 Jun 2024
Amount
Dismantling and taking out carefully old unserviceable / worn – out and broken components of wooden and steel furniture without damaging the remaining other serviceable members and supplying and fixing of the same with new components such as Wood Work / Wooden Members made of Teak Wood [Cat – I] wrought finished to required shape and size and applying two or more coats of French Polish to match with the existing surfaces including preparation of surfaces, Prelaminated Particle Board, Exterior Grade, One side Decorative Lamination and other side balancing white, Plywood BWR Grade [6mm thick teak wood beading / edging shall be provided to the exposed edges of Plywood / Particle Board], Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton Newar etc. and complete to its original shape and size all as shown on drawing, as specified and as directed for following articles:
TABLE DINING 8 PERSONS [FD – 273 / FD / E6 / MAP / 03]
Long Rail
Short Rail
Stiffener
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
BED HARD [FD – 246 / FD – 247]
Top made of 12mm thick, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked Plywood provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished.
Head Board Leg
Foot Board Leg
4mm thick Veneered Decorative Plywood BWR Grade for Head Board [on both faces] including 6mm thick Half Round Teak Wood beading
4mm thick Veneered Decorative Plywood BWR Grade for Foot Board [on both faces] including 6mm thick Half Round Teak Wood beading
BED HARD [FD / E6 / MAP / 08]
Top made of 12mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished.
CHAIR DINING [FD – 279, FD / MAP – II / 04, FD / MAP – II / 05]
Rear Leg
Front Leg
Side Rail
Stiffener
Cushion with Tapestry Cloth [FD / MAP – II / 04]
PVC Seat 4mm thick with Holes Screwed with Rails [FD / MAP – II / 05]
Taking out old worn out/damaged existing cane from Chair Dining, cleaning of caning holes without damaging the furniture & re – canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej pattern] complete as per drawing and as specified and directed. [FD – 279]
CHAIR EASY [FD – 229]
Front Leg
Rear Leg
Arm Rest
Taking out old worn out/damaged existing cane from Chair Easy, cleaning of caning holes without damaging the furniture & re – canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej pattern] complete as per drawing and as specified and directed.
CHAIR WRITING [FD – 202 / FD – 250 / FD – 280]
Rear Leg
Front Leg
Arm Rest
Stiffener
Taking out old worn out/damaged existing cane from Chair Writing, cleaning of caning holes without damaging the furniture & re-canning of the same with White or Cream or Ivory colour new cane of 2mm width plastic cane best quality for seat & back, beading with 4mm width plastic cane [Godrej Pattern] complete as per drawing and as specified and directed.
CHAIR WOODEN BOTTOM WITHOUT ARMS [FD – 225 / FD – 285]
Seat, 6mm thick Plywood BWR Grade
BIN SOILED LINEN [FD / E6 / MAP / 09]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Drawers including Brass Chromium plated Handles
Shutters including Magnetic Catches
Bottom including Stiffener
TABLE DRESSING LADIES [FD – 251 / FD / E6 / MAP / 14]
Mirror size 366 X 1220mm with wooden frame
Drawers
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Sides made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Back made of 12mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
Cushion Seat of Stool Dressing
TABLE DRESSING GENTS [FD / E6 / MAP / 16]
Mirror size 380x760mm with wooden frame
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Bottom made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Side made of 12mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Back side made of 12mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
Wooden Frame for Mirror
5.5mm Thick Glass Shelves
HAT STAND WITH MIRROR [FD – 233]
Mirror
Back side 6mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
4mm thick Veneered Decorative Plywood, BWR Grade on Faces
Brass Hook
CHAIR SCHOOL WITH HAND BOARD [FD / E6 / MAP / 05]
Hand Board made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
One Piece PVC Back & Seat
Two Coats of Black Colour Synthetic Enamel Paint over a coat of Red Oxide Primer including preparation to all steel surfaces
BOARD NOTICE 1830 X 1220mm [FD – 99]
Green Baize Cloth fixed to Soft Board
Wooden Frame of Shutter
Glazing with 4mm thick Sheet Glass Ordinary Quality
Back Made of 12mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
12mm thick Soft Board
BOARD NOTICE 2440 X 1220mm [FD – 99]
Green Baize Cloth fixed to Soft Board
Wooden Frame of Shutter
Glazing with 4mm thick Sheet Glass Ordinary Quality
Back Made of 12mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished and applying two coat of synthetic enamel paint over a coat of pink primer to the Back.
12mm thick Soft Board
BOOK CASE OPEN SMALL [FD – 355]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Side Rail / Centre Partition Large
Top Shelf
Bottom Self
Centre Partition Small
TABLE DINING 6 PERSONS [FD – 273 / FD / E6 / MAP / 03]
Long Rail
Short Rail
Bracket Made of MS Flat 30 X 6mm of Size 60 X 60mm made to shape fixed with screw in position
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
TABLE DINING 4 PERSONS [FD – 273 / FD / E6 / MAP / 03]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
CHAIR REVOLVING EXECUTIVE [TP]
Adjustable Hydraulic System
Base Frame
Twin Coaster Wheel
Handle
TABLE CENTRE [FD – 274 / FD – 235]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Long Rail
Short Rail
TEAPOY [FD – 278 / FD – 382]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Long Rail
Short Rail
Stiffener
TABLE WITH DRAWER 900 X 600 X 760mm [FD – 283]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Long Rail
Short Rail
Centre Stiffener
Side Stiffener
PEG TABLE [FD – 384]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Long Rail
Short Rail
TABLE OFFICE OFFICER WOOD [TP]
Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.
Drawer with Aluminium Handle
CHARPOY GI PIPE WITH PLYWOOD TOP [FD – 220]
Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm with suitable teak wood beading all around the plywood and duly French polished including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.
Removing unserviceable / broken MS Stiffener from the GI Charpoy, S & F new Stiffener made of MS Angle Iron 25 X 25 X 5mm thick, 850 mm long welded to Long Rails and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer complete all as shown on drawings and as directed.
Removing unserviceable Long Rail, S & F new Long Rail made of 32 mm bore GI Pipe, Medium Grade of 1.88 m long threaded at both ends and fixing to the existing 3 way 32 mm dia complete all as shown on drawings and as directed.
Cutting and threading both ends and Conversion of 32 mm dia Long Rail obtained from Serial Item No. 1 above into one number Short Rail as directed and fixing to the existing 3 way 32 mm dia elbow including removal of unserviceable Short Rail complete all as shown on drawings and as directed.
Cutting and threading at both ends and Conversion of 32 mm dia cut pieces of Long Rail obtained from Serial Item No. 1 above into one number Leg as directed and fixing to the existing 3 way 32 mm dia elbow and providing 40 mm dia, 3 mm thick MS Washer at bottom by welding and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer including removal of unserviceable Leg complete all as shown on drawings and as directed.
Cutting and threading both ends and Conversion of 32 mm dia Short rail obtained from Serial Item No. 1 above into Two numbers of Legs as directed and fixing to the existing 3 way 32 mm dia elbow and providing 40 mm dia, 3 mm thick MS Washer at bottom by welding and painting with two coats of Synthetic Enamel Paint [Black Colour] over a coat of Red Oxide Primer including removal of unserviceable Leg complete all as shown on drawings and as directed.
Removing unserviceable Three Way Elbow, S & F new Three Way, Medium Grade, GI Elbow, 32 mm Bore to Short Rail, Long Rail & Leg complete all as shown on drawings and as directed.
Removing unserviceable Check Nut, S & F new Check Nut, suitable for 32 mm bore pipes complete all as shown on drawings and as directed.
SOFA SET 4 / 5 PERSON WITH CUSHION [FD – 281]
Removing the existing unserviceable cushions along with tapestry cloth and S & F new synthetic foam cushions of size 22" X 21" X 100mm thick of 40 Density for sofa set 4/5 Seater duly stitched with new tapestry cloth of cost not less than ₹. 500.00 per meter of approved shade and texture by providing zip on one end complete all as specified and directed.
Removing the existing faded off / damaged tapestry cloth and providing tapestry cloth of cost not less than ₹. 500.00 per meter of approved quality and shade for detachable cushions of sofa set 5/4 Seater including stitching complete all as required, specified and directed.
Front Leg
Rear Leg
Side Rail
Front / Rear Rail for Three Seater
Front / Rear Rail for Single Seater
Wooden Bearers
Support Rail for Back Frame for Three Seater
Support Rail for Back Frame for Single Seater
Hand Rest
Side Rail of Back Frame
Battens for Three Seater
Battens for Single Seater
S & F 1.5mm thick Decorative laminated sheet of first quality [Shade and Texture as approved by GE], Type - 1 Surface finish, fixed with approved adhesive / Fevicol as per manufacturer's instructions complete all as specified and as directed.
S & F 4mm thick Veneered Decorative Plywood of first quality [Shade and Texture as approved by GE], Type - 1 Surface finish, fixed with approved adhesive / Fevicol as per manufacturer's instructions complete all as specified and as directed.
S & F in repairs, Cushion with Cover of Chair Computer Revolving / tilting with Arms complete all as specified and as directed. [MAP / 03
Removing old faded out polish by polish removing agent / scrapper or by caustic soda or by any other means without damaging surfaces, filling holes, knots with putty and finally rubbing with sand paper / abrasive cloth thoroughly for smooth and clean surface free from dust of furniture as listed below and applying high gloss French Polish till glossy shine finish obtained complete all as shown on drawing and as specified and as directed. Note: The hidden unexposed surfaces shall be made smooth by sand papering and a coat of Pink / Wood Primer shall be applied as preservation coat.
Chair Dining [FD – 228 / FD – 279]
Chair Easy [FD – 17 / FD – 229]
Chair Writing [FD – 250 / FD – 280]
Table Dining 8 Persons [FD – 273]
Table Dressing Ladies with Mirror [FD – 251]
Table Dining 4 Persons [FD – 273]
Table Dining 6 Persons [FD – 273]
Table Dressing Gents with Mirror [FD – 230 / FD – 379]
Table Centre [FD – 235 / FD – 274]
Peg Table [FD – 236 / FD – 277]
Board Notice 2440 X 1220 mm [FD – 99]
Board Notice 900 X 600 mm [FD – 117]
Board Notice 1830 x 1220 mm [FD – 99]
Bed Hard [FD – 246]
Side Board [FD – 241 / FD – 372]
Teapoy Wooden [FD – 278]
Table with Drawer 900 X 600 mm [FD – 283]
Table without Drawer 900 X 600 mm [FD – 284]
Double Bed [Wooden] of Size 1500 X 1950 X 450mm [TP]
Chair Dining [FD / MAP – II / 04, FD / MAP – II / 05]
Centre / Corner Table of size 900 X 525 X 400 mm [TP]
Sofa Single Seater [FD – 281 / FD – 373]
Dressing Counter 1350 X 500 X 300 mm with Mirror [TP]
Sofa Set 4 Seater [FD – 281 / FD – 373]
Sofa Set 5 Seater [FD – 281 / FD – 373]
Dry cleaning of Sofa Single Seater Cushions with Cover through approved Dry Cleaning Agents complete all as specified and as directed.
Chitturi Associates
M/s.Kissenlal Daga
SOHAN ENGINEERING ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .