SPECIAL REPAIR FOR REPLACEMENT OF BER AIR CONDITIONER 1.5 TON AND DESERT COOLER, DEEP FREEZER, REFRIGERATOR, WATER COOLER AND PROVN OF WATER TANK AND WATR SUPPLY LINE AT MIL STN GANDHINAGAR

Amount

Supply, installation,commissioning and testing of water cooler in existing place/new place with all fittings and fixtures like short pieces of GI pipe of appropriate size, elbow, socket, union etc as per site requirement for proper activation of Water cooler, stainless steel, electric driven single phase having approx storage and Nominal cooling capacity of 40/80Ltrs complete all as specified and directed by Engr-in-charge including disconnecting electrically, taking out existing water cooler and deposit to MES storeyard. Note:- water cooler must have warranty card and company test certificate.

Supply, installation, commissioning and testing of Glass Top Deep Freezer in existing/ new place with required fittings and fixtures for preserving all type of foods within hygiene condition, reliable and robust design, incl soft asthetics design, wheel for mobility, special baskets, rugged and heavy duty shelves, single phase 240 volt, 50 Hz, 320/326 Ltrs double door type 5 star rated, R-290/eco friendly refrigerant, enhanced power saving, 4 heavy duty castor wheel at the bottom of the freeze, low emissivity glass for better visibility and insulation, UV grade plastic for long lasting appreances, anti corrosive pre coated body, aluminium inner liner, high density puff insulation for better holding time, PUF thickness of 60 mm, door lock for restricted accessibility, design ambient temperature of 43 degree Celsius and temperature range of less than or equal to -18/0-10 degree celsius with one year comprehensive and 4 year additional warranty on compressor complete all as specified and directed by Engr-in-charge including disconnecting electrically, taking out existing Deep Freezer and deposit to MES storeyard. Note:- Deep Freezer must have warranty card and company test certificate.

Supply, installation,commissioning and testing of Desert cooler with body made out of 1.6 mm (16 gauge) thick MS sheet duly painted , electric driven , with 107 Watts Copper Winding motor, 18 Watts Submersible pump, Wood Wool pads, 220V, 15Hz, Single Phase, with steel blade having approx storage 50 Ltrs Tank capacity, 1400 RPM fan speed, 3 speed complete and having potraited GE(A) GANDHINAGAR on front with SRL No & year of mfg and CA NO in round stamp size 2" at right side of desert cooler all as specified and directed by Engr-in-charge including Disconnecting electrically, taking out existing Desert cooler and deposit to MES storeyard.. Note:- Desert cooler must have warranty card and company test certificate.

Supply, installation, commissioning and testing of refrigerator, of capacity 310 Liters as per latest energy efficient available in market, having features such as in built deodouriser, in buit stabilizer, convertible frost free, recessed handle type, with interior features incl ice tray, chiller tray, egg tray, interior lamp, twist ice maker type, toughened glass, complete all as specified and directed by Engr -in-charge disconnecting electrically, taking out existing Refrigerator and deposit to MES storeyard. Note:- Refrigerator must have of minimum 10 years of warranty on compressor with warranty card and company test certificate.

Supply, installation, commissioning and testing refrigerator, of capacity more than 190 Litres as per latest energy efficient available in market with feature having Smart Inverter Compressor, Toughened Glass Shelves, Base Stand Drawer, Fast Ice Making, Anti-Bacterial Gasket complete all as specified and directed by Engr-in-charge disconnecting electrically, taking out existing Refrigerator and deposit to MES storeyard. Note:- Refrigerator must have of minimum 10 years of warranty on compressor with warranty card and company test certificate.

Disconnectiing electrically and carefully taking out the AC from existing position and deposit to MES storeyard complete all as specified by Engr-in-charge. Note:- The Ref Mech will carefully dismantle the AC from its existing position, any damage to AC or its accessories will be procured by the contractor without any extra cost and the cost shall deemed to be incl in quoted rates.

Supply and fixing of voltage stabilizer for air conditioner upto 1.5 TR, 230 V, single phase AC, 50 Hz, working range 150 VAC- 285 VAC and capacity 12 A with thimble suitable for existing wires and existing DB incl connecting, testing and commisioning complete all as specified and directed by Engr-in-charge.

Supply, install,testing and commissioning of 5 Star rated air cooled hi wall spilt unit indoor/outdoor inverter type airconditioners electric driven ( 250 Volts, single phase, 50 HZ supply) with Energy efficient Rotary Compressor, working on R-134 or superior enviornment-friendly refrigerant, codless remote operated, comprising of indoor unit,wall mounted, material of construction of indoor unit ABS, Nominal cooling capacity 4500 KCal/Hr, Minimum Power consumption , Minimnu room discharge airflow 700 CuM /Hr Guranteed cooling capacity(Min) 4275 KCal/Hr, outdoor unit, Material of Cabinet GI Sheet 1.0 mm thick powder coated,Copper tubing, electric connection (Between indoor and outdoor unit located upto a maximum distance of 10 Meters) and condensate water drainage arrangement etc complete of capacity 1.5 Ton complete all as specified and directed at site. Note :-(i) The outdoor unit shall be fixed on wall with standard bracket or fixed on roof /floor with proper MS stand. The cost is deemed to be included in the quoted rates. Make:- Hitachi/O General/mitsubishi/Voltas

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Removing excavated surplus soil obtained from excavation to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply, laying, connecting, jointing and testing of PVC pipes B class of 40mm size laid in trenches conforming to IS 13592 with minimum pressure rating 10 kgf/cm2 incl all fittings complete with inter connection/jointing in existing connection all as specified and as directed

Supply, laying, connecting, jointing and testing of PVC pipes B class of 50mm size laid in trenches conforming to IS 13592 with minimum pressure rating 10 kgf/cm2 incl all fittings complete with inter connection/jointing in existing connection all as specified and as directed

Supply, laying, connecting, jointing and testing of PVC pipes B class of 90mm size laid in trenches conforming to IS 13592 with minimum pressure rating 10 kgf/cm2 incl all fittings complete with inter connection/jointing in existing connection all as specified and as directed

Supply, laying, connecting, jointing and testing of PVC pipes B class of 160mm size laid in trenches conforming to IS 13592 with minimum pressure rating 10 kgf/cm2 incl all fittings complete with inter connection/jointing in existing connection all as specified and as directed

M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of 25 to 100 mm bore CI/GI pipe complete all as specified and directed.

S&F PVC ball valve 160 mm dia conforming to IS 13592 in trenches incl special OD complete all as specified i& directed .

M&L for construction of valve pit of 500mmx500mmx800/780m consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including PCC cover specified and directed

Supply, installation and testing of 1.5 HP submersible pump, water cooled type, single phase, 230 V, 60 LPM complete all as specified and directed by engr-in-charge

S&F, in PVC gate/ball valve of 40mm size conforming to IS 13592 complete all as specified and directed

S&F, in PVC gate/ball valve of 50mm size conforming to IS 13592 complete all as specified and directed

S&F rotational moulded underground Storage water Tank , double layer of capacity 10000 Litres complete all as specified and directed. Note: Cost of excavation for Installation of Underground tank shall deemed to be incl in quoted rate

Electricals India (BID ID -3195069)

ALBA AC AND REF SERVICES (BID ID -3196412)

Abhishek Enterprises (BID ID -3202095)