SPECIAL REPAIR TO ELECTRICAL FITTING AND FIXTURE TO BUILDING NO P-298/1-4 AND -299/1 (OR LIVING) IN ARMY AREA JODHPUR

Amount

Taking down carefully existing unserviceable aluminum/copper point wiring of any description & in any position with and including taking out and removing existing wooden battens/conduits /casing capping fixed on surface and all fittings including unserviceable sunken/surface boxes & terminal/junction boxes of any description, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M & L for point wiring One light/Fan/Bell point controlled by one one/way switch using 1.5 Sqmm size (nominal sectional area) multi stranded copper conductor, FRLS PVC insulated & unsheathed cable, 1100 volts grade with new PVC casing capping suitable size (minimum size 25 mm) terminated into cancealed pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. Make of wire : Finolex/Havells/KEI, Make of PVC casing capping : Finolex/Modi/Polycab.

Ditti- but One 3 Pin 5 Amps socket outlet on same board -ditto-

Ditti- but One 3 Pin 5 Amps socket outlet on independent board -ditto-

Ditti- but One light point controlled by two,two way switches-ditto-

All as per item No 2 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts. Make : Anchor Penta / Cona /SSK

Supply and fixing switch piano, flush type ,single pole two way 5/6 Amps 240 Volts. Make : Anchor Penta / Cona /SSK

Supply and fixing switch piano, flush type ,single pole one way 15/16 Amps 240 Volts. Make : Anchor Penta / Cona /SSK

S/F Socket outlet 2 in 1, 3 pin, 5A universal. Make : Anchor Penta / Cona /SSK

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type ISI mark. Make : Anchor Penta / Cona /SSK

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked Make : Anchor Penta / Cona /SSK

Supply and Fixing step type fan regulator flush type and connecting with fan wiring, in laminated sheet all as directed, Make : Anchor Penta /Cona/SSK.

Taking down carefully copper/aluminium sub main of different size complete & moving materials to store for keeping in safe custody for re-use at site/Sch of credit and making good disturbed surface of walls, floors, etc as per existing colour.

M&L for Sub main wiring with PVC insulated but unsheathed 2x6 sqmm single core multi stranded copper conductor cable passing through and incl PVC casing capping on wall (by means of screw incl making good existing ) ISI marked and casing caing accessories fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x6 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire (green colour) including taking down old one. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of PVC casing caping will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI, Make of PVC casing caping : Finolex/Modi/Polycab.

All as above item No 5 but using 2x4 Sqmm cable single core copper with 4 Sqmm copper conductor as earth lead. Make of wire : Finolex/Havells/KEI, Make of PVC casing caping : Finolex/Modi/Polycab.

All as above item No 5 but using 3x10 Sqmm cable single core copper with 2x10 Sqmm copper conductor as earth lead.Make of wire : Finolex/Havells/KEI, Make of PVC casing caping : Finolex/Modi/Polycab.

S&F sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified cat No 507811 Make:Legrand or equivalent in ABB/Scheinder/L&T.

S&F wall mounted LED batten 20 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver ,230 V, having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Cat No- LCTLN-20-CDL Make Crompton or equivalent in Phillips/Havells.

S&F in replacement wall mounted LED batten 10/12 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 V having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Cat No- LCTLN-10-CDL Make Crompton or equivalent in Phillips/Havells.

S &F exhaust fan size 300 mm with lovers including making hole in wall by means of cutting wall and making good disturbed surface including matching to existing colour complete all as specified and and directed by Engr in Charge. Cat No- EXHD300-6-1(ISI) Make CROMTON or euivalent in Khaitan/Usha.

Taking down carefully UNSV main switch and DB's including MCBs of any size, make, type and capacity removing materials to store for keeping in safe custody for re-use at site/Sch of credit and making good disturbed surface of walls, floors, etc.all as directed.

S&F sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) with 100 Amps rated coper busbar and MCB for double door having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed . Cat No- 507670 Make: Legrand or equivalent ABB/Schneider/L&T

S&F Distribution boards 415 V ,8 way SPN with 100 Amps rated coper busbar and MCB for double door having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed .Make: Cat No- 507611of Legrand or equivalent ABB/Schneider/L&T.

S&F MCB SP 6 to 32 Amps 10 KA, 240 V, C curve complete all as specified and directed . Make: Cat No 408590 of Legrand or equivalent ABB/Schneider/L&T.

S&F MCB SPN 32 amps 10 KA, 240 V, C curve complete all as specified and directed . Cat No 408617 Make: Legrand or equivalent ABB/Schneider/L&T.

S&F MCB TPN 63 amps 10 KA, 415 V, C curve complete all as specified and directed . Cat No 408683 Make: Legrand or equivalent ABB/Schneider/L&T

S&F for sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) with 250 Amps rated coper busbar with MCCB 160 A, TPN 415 V as incommer with door cover having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed . Cat No- 507745 Make: Legrand or equivalent ABB/Schneider/L&T.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit (1:3:6) in cement concrete & Kota stone cover plate, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 15mm dia light grade GI pipe for earth lead protection etc complete all as specified and directed by Engineer-in-Charge.

M/L for cutting of PCC/Kota stone floor/plinth /wall/road etc for insertion of GI pipe for protection of GI wire of earthing including making good disturbed surface.

Taking down ceiling fan and re-hanging the same after painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filller, one coat after cleaning all dust, dirt etc and replaceing of 3 core 1.5 sqmm sheathed copper cable from connector to ceiling rose complete all as specified and directed by Engr in Charge.

Taking down Ehaust fan and re-hanging the same after painting of Exhaust fans complete, in situ with syntetic enamel paint by spraying including filling cavities with filller, one coat after scraping and cleaning all dust, dirt etc and replaceing of 3 core 1.5 sqmm sheathed copper cable from connector to ceiling rose complete all as specified and directed by Engr in Charge.

S & Fixing LED Street light 45 watt including provision of GI pipe bracket 40 mm dia light grade pipe 1.5 mtr long , nut,bolts,washers and clamp etc incl 1.5 Sqmm 3 core sheathed copper PVC cable for connection complete all as specified and directed by Engr in Charge. Cat No-LSTS-45-CDL-M Make Crompton or equivalent in Phillips/Havells.

SPAGE Consultants

M/s R K Enterprises

Shri Ram Traders Co

Nvimal Engineer and Contractor

M/s Shiv Builder and Suppliers

M/S VENUS BUILDER

M/S ANIL TRADERS

S D POWER SOL

M/s Vishaka Enterprises

SHRI BHIKSHU ART AND CONSTRUCTION CO

SURESH TRADERS