Loading…
Loading…
Tender Value
₹39.9 L
EMD Value
₹79,797
Closing Date
5 Aug 2026, 5:00 pm4d left
Executive Engineer
Executive Engineer Jal Shakti Division Padhar
SH CO of Pump House Dismantling Relaying and cutting Welding of GI Pipe Providing Installation testing and commissioning of Sub Pump Set Providing laying jointing and testing of GMS Tube of Distribution system of various dia and P/ L/J Rising Main
2026_HPIPH_140078_1
4443-93 dated 27.07.2026
Open Tender
Civil Works
Item Rate
365 days
Kataula
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,000
EE Padhar
₹79,797
27 Jul 2026
27 Jul 2026
6 Aug 2026
27 Jul 2026
5 Aug 2026
27 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge. | 1,015.95 | Cum | - | - |
| 2 | Providing and laying cement concrete 1:4:8 ( 1cement:4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth. | 5.49 | Cum | - | - |
| 3 | Random rubble masonry/polygonal rubble masonry (uncoursed brought in to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggragate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement : 6 sand). | 1.72 | Cum | - | - |
| 4Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- | |||||
| 4.01 | Beam, cantilever, girders and lintels.Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. | 2.44 | Sqm | - | - |
| 4.02 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. | 2.88 | Sqm | - | - |
| 4.03 | Columns, Pillars, Piers, Abutments, Posts and Struts | 11.04 | Sqm | - | - |
| 5Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- | |||||
| 5.01 | Lintels, beams girders bressumers and cantilevers upto floor two level. | 0.55 | Cum | - | - |
| 6Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Form6k.pdf
Tender Documents • 0.28 MB
Form8K.pdf
Tender Documents • 1.36 MB
Termsconditionk.pdf
Tender Documents • 0.28 MB
BOQ_207674.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].