Construction of New 100 Seated Girls Hostel building at Dengula of Koira Block.

Earth work excavation of foundation in hard or gravelly soil within initial lead of 50m and initial lift of 1.5m including dressing the sides, leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge.

Filling foundation and plinth with filling sand laying in layers including ramming, watering, compacting including cost, conveyance and royalty of sand from approved quarry and other taxes if any with all leads, lifts, T&P etc complete the items of work in all respect as per specification and direction of Engineer in charge.

CC (1:4:8) using 40 mm size and down graded crusher broken HG stone metal free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and taxes of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge.

Brick work with Flyash bricks of size 23 cm X 11 cm X 8 cm having crushing strength between 100 kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in foundation & plinth including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

Brick work with Flyash bricks of size 23 cm X 11 cm X 8 cm having crushing strength between 100 Kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in superstructure including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

T. Floor

RCC work of M-20 grade with 20 mm and down grade black hard granite chips including cost, conveyance, royalty and all taxes of all materials with all leads, lifts, T&P etc including rigid and smooth centering, shuttering and dismantling the same after the curing of RCC work for 28 days complete the item of work in all respect as per specification and direction of Engineer-in-charge..

G.Floor

Foundation

Plinth Beam

Col. In Superstructure

Lintel

Chajja

Roof Beam

Roof Slab

Staircase

Drain Slab

F. Floor

Col. In Superstructure

Lintel

Chajja

Roof Beam

Roof Slab

Staircase

T. Floor

Col. In Superstructure

Lintel

Chajja

Roof Beam

Roof Slab

Labour charges for straightening coiled or bent up MS rods including cutting, bending and welding if required and tying the grills, laying and placing in proper position as per design including cost, conveyance, taxes etc of tested MS/TS rod with testing data of required specification & cost of binding wires of 18 to 20 gauge, labour, T&P required for the work complete and as per the specification and direction of the Engineer-in-charge.

G.Floor

F. Floor

T. Floor

12mm thick cement plaster (1:4) in cement mortar with cement punning finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge.

G.Floor

12mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge.

G.Floor

F. Floor

T. Floor

16mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge.

G.Floor

F. Floor

T. Floor

Fixing ceramic floor tiles in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement: 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

Fixing ceramic wall tile in dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joint with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

G.Floor

F. Floor

G.Floor

F. Floor

Fixing industrial Vetrified tiles in floor, trade of steps on 20mm thick cement plaster (1:4) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

Fixing industrial Vetrified tiles in dados,risers of steps on 12mm thick cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

Fixing granite tiles on 20mm thick cement plaster (1:4) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

Supplying of M.S Doors, Window with grills, Grills,Collapsible gates made out of M.S Angle frame, M.s Flat Sheet etc. of approved section and design, electrically welded properly with all necessary locking arrangement and one coat redoxide primer including cost of all materials, labour, T&P, carriage of materials to site etc. complete as per the direction of the Engineer-in-charge.

G.Floor

F. Floor

T. Floor

Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade including smoothening the surface by sand paper and filler etc complete with cost, conveyance, royalty, taxes of all materials, labours T&P required as per specification and direction of Engineer-in-charge.

G.Floor

F. Floor

T. Floor

Finishing to walls with two coats weather coat over one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty taxes of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge.

G.Floor

F. Floor

T. Floor

Finishing to walls with two coats plastic emulsion paint over one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty taxes of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge.

G.Floor

F. Floor

T. Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90m C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for completion of work in all respect as per direction of Engineer-in-charge.

G.Floor

F. Floor

CC (1:2:4) with 12mm size and down graded C.B. chips from approved quarry

2.0cm thick grading Plater hard crusher broken granite chips on new work including watering curing cost of all materials, water proofing compounds,T&P required for the works etc complete.

G.Floor, F. Floor & T. Floor

FFixing glazed earthenware squatting plate of size 600 mm x 350 mm confirming to IS : 2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25 mm CM (1:8) laid over 150 mm CC (1:4:8) using 40 mm HG metal all complete as per specification.

Fixing Kota Stone in floor, trade of steps on 12mm thick cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

Providing,supplying and laying precast inter locking concrete Paver block over a prepared sub-base and filling the inter-stices and joint with fine sand,brooming and compacting by plate vibrator including cost,conveyance,Royalty & Taxes of Materials including labour charges etc. all complete.

Providing and applying high performance touch applied APP based membrane sika wp or equalised or asian paint sheld 104P (APP mofdified bituminus membrane) of 4mm thickness with -woven polyester mat reinforcement of 160gsm prefabricated & self-finished five layered design super imposed with 20 microne themo fusible film by first applying bitumimous primer, confirming to IS;-3384@ 0.325 kg/sqm and following it to dry & then touching of the membrance with the help of LPC/ butane gas touch keeping over tapping of 4' at the end fusing of all joint by gas touching cost, conveyance, T&P

G.Floor

F. Floor

T. Floor

BORE WELL

Labour for drilling a perfectly vertical bore hole of 150 mm dia for a specified depth below boulder zone through consolidated & un consolidated rock with down the hole hammer drilling rigs as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories , tools plants and consumables etc. ( For soft , medium , hard rock formation )

0.00 Mtr to 150.00 mtr.

Lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted & fixed up imperfactly vertical position, including cutting & threading pipe & slotted pipe, supplying and fixing all jointing materials, tools & plants etc. complte and keeping the top of the casing pipe thraded including plugging tube wells to prevent entry of foreign meterials from above.

200 mm dia PVC casing pipe

Cleaning and developing the tube well with their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipmennts and labours as per the direction of Engineer-in-charge.

For one tube well

Cost of 200mm. Dia PVC casing Pipe

Cleaning and developing the tube well with their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipmennts and labours as per the direction of Engineer-in-charge.

1.00 HP vertical submerssible pump set (Q = 50 lpm, H = 80 mtr., single phase)

1.00 HP control panel

25 mm dia PVC column pipe

1.50 sqmm submerssible cable

PVC Sup

porting rope

32 mm dia GI adoptor

200 mm dia CI Bore Cap

MS Bore Clamp

Earth work excavation of foundation in hard or gravelly soil within initial lead of 50m and initial lift of 1.5m including dressing the sides, leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge.

Filling foundation and plinth with filling sand laying in layers including ramming, watering, compacting including cost, conveyance and royalty of sand from approved quarry and other taxes if any with all leads, lifts, T&P etc complete the items of work in all respect as per specification and direction of Engineer in charge.

CC (1:4:8) using 40 mm size and down graded crusher broken HG stone metal free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and taxes of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge.

Brick work with Flyash bricks of size 23 cm X 11 cm X 8 cm having crushing strength between 100 kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in foundation & plinth including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

Brick work with Flyash bricks of size 23 cm X 11 cm X 8 cm having crushing strength between 100 Kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in superstructure including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

RCC work of M-20 grade with 20 mm and down grade black hard granite chips including cost, conveyance, royalty and all taxes of all materials with all leads, lifts, T&P etc including rigid and smooth centering, shuttering and dismantling the same after the curing of RCC work for 28 days complete the item of work in all respect as per specification and direction of Engineer-in-charge..

Foundation

Plinth Beam

Col. In Superstructure

Labour charges for straightening coiled or bent up MS rods including cutting, bending and welding if required and tying the grills, laying and placing in proper position as per design including cost, conveyance, taxes etc of tested MS/TS rod with testing data of required specification & cost of binding wires of 18 to 20 gauge, labour, T&P required for the work complete and as per the specification and direction of the Engineer-in-charge.

12mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge.

Supplying of M.S Doors, Window with grills, Grills,Collapsible gates made out of M.S Angle frame, M.s Flat Sheet etc. of approved section and design, electrically welded properly with all necessary locking arrangement and one coat redoxide primer including cost of all materials, labour, T&P, carriage of materials to site etc. complete as per the direction of the Engineer-in-charge.

Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade including smoothening the surface by sand paper and filler etc complete with cost, conveyance, royalty, taxes of all materials, labours T&P required as per specification and direction of Engineer-in-charge.

Finishing to walls with two coats weather coat over one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty taxes of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge.

CC (1:2:4) with 12mm size and down graded C.B. chips from approved quarry

BOUNDARY WALL

E.I.WORK

WIRING AND CONDUITING

Recessed wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell Point with 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.0 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked as earth wire including all accesories and connection as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Medium

Short

5 A plug point

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

S/F of M.S. box for 4 module 18SWG

S/F of M.S. box for 6 module 18SWG

S/F of M.S. box for 8 module 18SWG

Recessed wiring for 15 / 16 Amp socket outlet with 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

SUBMAINS

Recessed wiring to Sub-Main in 2 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 6.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 10 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 4 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

MCB, DB

S/F of 4 way (4+12) TPN MCB Distribution Board , Double door

S/F of 63A TPN MCB C-Type (make V-guard)

PANEL

S/F of 200 amp T.P.N copper bus bar with all connections (MAKE- BENLO) for FF

LIGHT FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

Surface mounted indoor type SINGLE LED TUBE 4 feet Luminaire with LED Lamp Similar to Havells Cat No. ENDURALINEARNEOBS22WLED865SPCWH

Surface mounted indoor type 12W ROUND LED Luminaire with LED Lamp Similar to Havells Cat No. ANALOGDRIVERNM12/15W or equivalent.

Supply, installation, testing & commisioning of 12w LED bulb

S/F of BK angle holder ISI marked including connections etc. insulated of ceiling rose

Supply, installation, Testting and commissioni of celling fan of following sweep 230/250 volts , 50 Hz, complete with suitable, clamp, downrod, blades, connections with 1.5 sq. mm PVC insulated copper conductor cable et as required and fan hook made of 16mm M.S. rod in R.C.C roof complete with all accessories.

Ceiling Fan 1200mm

S/F of electronic ceiling fan regulator in existing switch board including connections with 1.5sqmm

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.

EARTHING

S/F of copper earth plate earhing 600mm x 600mm x 6mm with salt and charcoal for plate earth electrode

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

LIGHTNING ARRESTER

S/F of lighting arrester of size 2'6" length made of 5" dia copper rod over which 5nos 5" length pointed copper rods of 3" dia with suitable size of nuts and bolts.

S/F of copper earth plate earhing 600mm x 600mm x 3.15mm with salt and charcoal for plate earth electrode

S/L of 25mm x 25mm x 5mm Cu. Earth strip in 40

mm dia G.I. Pipe

CABLE & TERMINATION

Provision of armoured cable of size 3 1/2 x 50sqmm

Provision of 3 1/2 x 35sqmm armoured cable with all connections (25) for DG connections

Laying of MV cable above 25sqmm to 120sqmm in ground

S/F of end termination of LV/MV cable size 3 1/2 x 50sqmm

S/F of end termination of LV/MV cable size 3 1/2 x 35sqmm

EXTERNAL LIGHTING

Supply, Installation, Testing and Commissioning of street / flood lighting outdoor pre-wired fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on wall or bracket / poles, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

Outdoor Street Light LED Luminaire with 40w LED Lamp similar to Havells Cat No. ENDURAPEARLNEOSL40WLED757PASYTOPC or equivalent

Gate Light fitting of 30watt LED etc complete as required similar to Havells Cat No.CORALPT35WLED757PSYMTOPC or equivalent

SAFETY EQUIPMENTS

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for electrical fire protection as per standards of electoral inspectorate.

Supply ans fixing of Co2 fire exinguisher with mounting clamps with pressure test certificate.

P.H. WORK

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes confirming to Is : 15778 having thermal stability for hot & cold water supply, including all CPVC plain & brass threades fitting including fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of EIC.

40 mm dia CPVC pipe

Providing & laying in trenches unplastisized PVC pipes confirming to IS:4985 - 2000 and specials of the following out side diametre for all classes including jointing with supply of approved solvent cement by non heat application method including testing as per specification complete.

110 mm dia D/S SWR Pipe

160 mm dia D/S SWR Pipe

Providing and fixing of Brass Ball Valve (Hirizontal plunger type) confirming to IS : 1703-1977 as per specification complete.

110 mm dia D/S SWR Pipe

32 mm dia

25 mm dia

15 mm dia CP brass long body bib cock

15 mm dia CP brass short body bib cock

15 mm dia CP angle stop cock

15 mm dia PVC connecting pipe

32 mm dia PVC waste pipe

100 mm dia CP Flange

125 mm dia CP waste

200 mm dia CP waste

15 mm dia x 125 mm long CP extension nipple

Providing and fixing water closet, squatting pan ( Indian type W.C. pan) confirming to IS : 2556 : Part 3-2004 duly embaded in cement concrete ( 1:4:8) using hard granite metal 4 cm nominal size all complete as per specification.

500 x 440 mm size WGVCWC squatting pan

Providing & fixing 100 mm size 'P' or 'S' trap ( with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.

100 mm dia SCI 'P' trap

Providing Rotational moulded polyethylene cylindrical vertical water storage tanks confirming to IS : 12701 - 1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra socket and jam nut, fixing ball valve etc. including hosting upto a height of 5 mtrs above ground level and placing the tank to the required position etc. all complete as per specification and direction of EIC.

1000 liter capacity water storage tank

Providing and fixing PVC low level flushing cistern with manually controlled delivery (handle lever) confirming to IS : 7231, with all fitting and fixures complete.

10 litre capacity- white

Supplying & fixing wash basin with hole for pillar taps confirming to IS 2556 : part 4-2004 with cast iron or MS bracket painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Vitreous china flat back wash basin 550 x 400 mm

Fixing Pillar Taps capstan head screw down high pressure lettered 'hot' and 'cold' with long screws, shank and back nurs of the following nominal bore as per specification.

15 mm dia CP swan neck Pillar cock

Supplyng & fixing (a) liquid soap container - glass container or plastic container with chromium plated brass lid and bracket fixed to wooden plugs with chromium plated brass screws or (b) chromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plug with chromium plated brass screws or (c) white glazed tyooth brush holder fixed to wooden plug with Chromium Plated brass screws as per specification.

Liquid Soap Container

Fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with cromium plated brass screws and washers complete as per specification.

600 mm x 450 mm bevelled edge mirror

Supplying & fixing chromium plated brass shower rose with 15 mm or 20 mm inlet including polishing all complete as per specification.

15 mm dia revolving shower

Supplying & fixing standard size chromium plated brass towel rail fixed to wooden plug with chromium plated brass screws complete as per specification

Chromium Plated brass towel rail

Supplying & fixing standard size chromium plated brass towel ring fixed to wooden plug with chromium plated brass screws complete as per specification

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.

In Ground Floor

Chromium plated brass towel ring

250 mm thick wall

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

Supplying all materials, labour, T&P for construction of M.H Chamber of size 1.20m x 0.90mx 0.90m deep with 100 mm thick precast RCC slab in C.C (1:1.5:3), 100 mm thick sand filling in foundation, 150 mm thick cement concrete (1:3:6) using 25 mm size HGCB metal in foundation, KB brick masonary in CM (1:4) using 23 cm si

ze KB bricks, in side plaster 12 mm thick in CM (1:4), CC (1:2:4) with neat cement punning for benching and channeling including earth work in excavation, earth filling with excavated earth to out side cavity of chamber etc.complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P for construction of M.H Chamber of size 0.75m x 0.75mx 0.60m deep with 100 mm thick precast RCC slab in C.C (1:1.5:3), 100 mm thick sand filling in foundation, 150 mm thick cement concrete (1:3:6) using 25 mm size HGCB metal in foundation, KB brick masonary in CM (1:4) using 23 cm size KB bricks, in side plaster 12 mm thick in CM (1:4), CC (1:2:4) with neat cement punning for benching and channeling including earth work in excavation, earth filling with excavated earth to out side cavity of chamber etc.complete as per specification and direction of the Engineer-in-charge.

Fixing Kota stpme in dados,walls on 12mm thick cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.