FAVOF4865

Select, Excess (+), Less (-)

Tender Inviting Authority: Sudhansu Sekhar Das, Engineer/ Valves/Sub-Contracting, BHEL, Trichy

Name of Work: OFE STELLITING AND MACHINING OF GATE -4879 AND 4881

Contract No: FAVOF4865

Name of the Bidder/ Bidding Firm / Company : Vendor Code:

Sl. No. Material Description Material Code Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate In Figure (INR- Indian Rupee) / Unit GST (If applicable in Percentage) GST Amount in Rs. P SCOPE HSN / SAC Code

10 GATE-4879(F) 2-5M P2 HWO CS STL-M/C 931818818000 4200 Nos Excess(+) Full Conversion INR 1.Marking, drilling, milling, turning operations are to be done as per Drawing with latest revision 4V487993162 /01/. 2.LPI is to be done on the area to be stellite welded. 3.Stellite welding and Heat treatment is to be done with respect to latest applicable BHEL approved vendor WPS and as per Drg.No. with latest revision 4V487993158 /01/. 4.Final machining is to be done as per Drg.No. with latest revision 3V487926093 /02/ and provide 0.22 mm grinding allowance on each side. 5.Final LPI is to be done on the stellite welded machined surface on both sides to ensure defect free welding. 6.Protect each gate with bubble sheet packing. 7.BHEL scope is supply of Raw material and Stellite consumables from stores. 8.Grinding,Lapping and Hardness checking are done by BHEL at shop floor.

20 GATE-4881(F) 2.5-5M P2 HWO CS STL-M/C 931818828000 1760 Nos Excess(+) Full Conversion INR 1. Marking, drilling, milling, turning operations are to be done as per drawing with latest revision 4V488193186 /01/ . 2.LPI is to be done on the area to be stellite welded. 3.Stellite welding and Heat treatment is to be done with respect to latest applicable BHEL approved vendor WPS and as per Drg.No. with latest revision 4V488193187 /01/. 4.Final machining is to be done as per Drg.No. with latest revision 2V488104213/04/ and provide 0.22 mm grinding allowance on each side. 5.Final LPI is to be done on the stellite welded machined surface on both sides to ensure defect free welding. 6.Protect each gate with bubble sheet packing. 7. BHEL scope is supply of Raw material and Stellite consumables from stores. 8.Grinding,Lapping and Hardness checking are done by BHEL at shop floor.

Total in Figures

Quoted Rate in Figures Select %

Please Enable Macros to View BoQ information