SPL REP TO VARIOUS BLDGS UNDER GE KARGIL AND PROVN OF STAINLESS STEEL LETTERS AND 01 SHED AT 121(I) INF BDE AT KARGIL UNDER GE KARGIL

Amount

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

Dismantling timber scantlings fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in unframed work.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as apecified.

Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame shutter(without taking off shutter from the frame but n.exc 1.5 Sqm

Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each.

Taking down GI tubing 15 mm dia, connections.

Taking down GI tubing 20 mm dia, connections.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Dismantling of water tank exc 500 but n exc 1000 ltr capacity

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge

M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces, finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work complete, all as specified and directed by Engr-in-Charge

M&L 2nd class soft Wood as in plain fillets square, clean sawn exc. 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 300x200x7 mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including15mm thick screed bed as in 1:6 and including dismantling of stone slab complete all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair complete all as specified.

Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.

M&L RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

S & F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

Moulding as in cornices picture rails and the like n exc 6sqcm

M&L second class wood designer Plain fillets square,rectangular or triangular in section, Exc 3Sqcm byt n.exc 6Sqcm, clean sawn, secured with nails or brads.

Second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S & F 30 mm thick Second class soft wood skelton shutters, devided inot squares with plain, chamfered or rounded mitred and rebated sash bars for windows any numbers, size of stiles and rails as specified in SSR (1991) Part-I section 8 clause 8.24 (b), complete all as specified and directed by Engr-in-Charge.

Second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S&F 100 mm butt hinges medim weight cold rolled mild steel fixed with screws or welded all as directed.

S&F anodised aluminium barrel tower bolt extruded sections 200 mm size.

S&F 150mm long, mild steel handles cast type, fitted.

S&F Mild steel slidig door bolt 300 mm long plate type slove enamelled black wioth bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

M&L applying two coats of synthetic enamel paint including preparation of steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Prepation of plastered or unplastered surfaces of walls and applying two coats of Cement base paint , complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper distemper on old wall surface with approved colour and shade complete as specified and directed by Enginer-in Charge. Make Asian Paints(Tractor)/Berger paints (Bison Super)

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors

Ditto- but 20mm dia.

S&F grating doom 125mm dia with or without hole

S&F in repairs Bib taps15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixed in repair, complete all as specified and directed by Engr-in-Charge.

Supply and fixed Rotational moulded HDPE water storage tanks (Cylindrical vertical closed top), double wall construction, hoisted and fixed in position or placed in position inside or outside the building, connecting up pipes and securing access covers complete, 1000 Ltr capacity, complete all as specified and directed by Engr-in-Charge.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm®

S&F waste coupling of PTMT (half or full threaded) 32 mm dia 45 gms of discharge pipe, complete all as specified and directed by Engr-in-Charge.

Removing surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified. and directed by Engr-in-Charge.

Demolition and breaking up PVC drain pipes

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe.

PVC (SWR) bends any radius of 110mm bore

S & F in repairs stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).

M & L 40 mm thick PCC type B-1 (1:2:4) (20 mm garded aggregate) in sub base, Floors, even and fair complete all as specified.

Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0..36sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick, , complete all as specified. and directed by Engr-in-Charge.

M&L for septic tank exc in hard dence soil, foundation in PCC 1:3:6 well of honey combed and each solid in M-25 concrete, including, intercepting chaber, screen chamber stone work in CM 1:4 RCC cover slab in M-25 filling with tone boulder complet of 1.50 dia and 1.50 m deep, complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge..

S&F in repairs curtain rail anodised almn alloy with fixing brackets, stops, rollers etc.

S & F in repairs Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug, complete all as specified and directed by Engr-in-Charge.

PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge.

S & F in repair vitreous china, wash down water closet (EWC) with seat cover coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified.

S&Fin repir PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm , all as specified and as directed , fixed in repairs.

S & F in repairs for 15 mm pillar taps,cast copper alloy fancy type with chromium plated screwed down,screwed for iron pipe or for fixed in repairs.

S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F butt hinges med weight cold rolled MS, size 75 mm and as directed by Engr Encharge.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed and as directed by Engr Encharge.

S&F 100mm long aluminium handle, cast type,anodised and as directed by Engr Encharge.

Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring.

M & L for providing and fixing Stainless steel (Grade-304) letters of height, thickness and design as approved by the GE for writing "KARGIL SENTINELS" in 3D letter including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts completeall fixing arrangement on granite wall at any height all as directed.

M&L for cement concrete type D-2 1:4:8 (Using 40mm graded aggregate as in fdn

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality

Form work to sides of conrete foundation footings bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work etc. complete all as specified and directed by Engr-in-Charge.

S&F Curved profile Pre-painted galvalume aluminium zinc coating GI based sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed withself tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Steel work in tubular trusses any shape including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails ,braces nut ,bolt ,etc ,complete ,drilling for fixing of steel sheeting or other covering ,complete all as specified

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.

All as per Srl item No 80 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 80 here in before but for one 3 pin socket outlet 5 Amps on independent board.

Description all as per item No 81 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for industrial plug socket. point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Switch piano flush type 5 Amps, single pole one way.

Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

Switch socket combination 2 in 1, 5 and 15 Amps flush type.

Lamp holder, insulated body with back plate suitable for batten fittings

Ceiling rose surface bakelite 65x50mm, two to three terminals.

Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

MCB, single pole and neutral, 63 Amp, 240V, 10KA.

MCB, single pole, 5 to 32 Amp, 240V, 10KA.

Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified.

Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 5 of SSR Part-I conected to earth test point as specified or indicated including testing on completion.

S&F 1100 volts grade heavy duty 35 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, complete all as specified.

Supply and fixing LED 18 Watt Tubelight fitting decorative ultra slim square profile linear with extruded polycarbonate environment friendly Make Havells Cat part LUMILINEPLUSBS18WLED865SPCSS OR equivalent in WIPRO/PHILIPS

Supply & fix LED building security light 60 watt energy efficient with bracket,suitable dia pipe for fixing the street light in wall all as directed.Make Havells Cat part No.ENDURAPERLINEOSL60WLED75PASYTOPC or equivalent in PHILIPS/WIPRO

Note : Deduction for amount of Rs 66,057.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S UNIVERSAL ENGINEERS

ABASS ENTERPRISE

JP AND CO.

M/S MOHD HUSSAIN

M/S TRADE LINK