Deposit work in favour of Augustan Textile Colours for extension work of 11kV campus feeder

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle)

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle)

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one set AB switch and giving connection

Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Laying 3*300mm2 XLPE Armoured UG cable using Horizontal Direct Drilling HDD 200mm bore (160mm dia, PN 100, PE 8,6.2mm wall thickness HDPE pipe) across the the Railway track, supplying and pullying 160mm HDPE pipe duct in rocky soil and reaming Rocky area

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Stringing of 11 kV Aerial bunched cable of size 3 x 150 + 1 x 120 sqmm with bare/insulated Messenger through existing poles

Doing one cable end termination on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size