WBPWD/AE/BKPSDII/eNIT56/25-26

Labour for dismantling G.I. pipe with fittings. (i) 15 mm

(iii) 25 mm

Removing chokage in G.I. pipe including cleaning pipe. (i) 15 mm

(iii) 25 mm

Labour and supply of G.I. plain equal elbow (i) 15 mm

(iii) 25 mm

Labour and supply of G.I. socket with I.S.I. mark (i) 15 mm

(iii) 25 mm

Labour and supply of G.I. plain tee (i) 15 mm

(iii) 25 mm

Labour and supply of G.I. reducing tee i)20mm x 15mm

iii)25mm x 20mm

Labour and supply of long screw (150mm long) ii)20mm

iii)25mm

Refixing G.I. pipe with fittings after cleaning where necessary (i) 15 mm

(iii) 25 mm

Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing. (i) 15 mm

(iii) 25 mm

(b) With 'S' trap (without vent)

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint. (i) 600 mm X 450 mm X 200 mm

Dismantling H.C.I. pipe with fittings including melting lead caulked joints - (iii) 100 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length, (b) 110 mm

(A) (i) Single Socketed 3 Meter Length, (c) 160 mm

(B) Fittings (b) 110 mm iv) Door Tee(LH) & (RH) - (b) 110 mm

xii) Door Bend (LH) & (RH) - (b) 110 mm

x) Bend 87.5º - (b) 110 mm

xviii) W.C. Connector (450 mm long) W / lipring - (b) 110 mm

(B) Fittings (c) 160 mm (iii) Door Tee - (c) 160 mm

xi) Door Bend (T.S.) - (c) 160 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A)Above ground (b) 110 mm

Repairing damaged G.I. tank of any capacity after lowering on roof by replacing with new 2 mm thick G.I. sheet by rivetting with necessary packing, painting new portions, refixing the existing C.I. tank cover by rivetting in new position, if necessary, after taking out old cover very carefully etc. complete (excluding the cost of dismantling and refixing tank but including the cost of cutting out worn out portion by suitable means to regular shape). (Payment will be made on the basis of area of damaged portion replaced.)

Punching holes in tank(G.I.).

Fixing G.I. tank in position including refitting pipe connection.

Supplying, fitting and fixing cast iron raised rain proof tank cover 450mm

Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth (ii) 100 mm dia. (internal)

(i) 150 mm dia. (internal)

Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe.

Refixing H.C.I. pipe with fittings including lead caulked joints (with the old molten lead). (iii) 100 mm

Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1) (iii) 100 mm

Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/1970 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of P ainting will be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1) (iii) 100 mm

Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid (a) With valamoid joints including sealing the top with cement mortar (4:1) (iii) 100 mm

Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1) (iii) 100 mm

Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap (iii) 100 mm

Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately). (i) 100 mm X 150 mm

(vii) 100 mm X 600 mm

Removing chokage of H.C.I. or S.W. pipe with split bamboo. (a) Underground back side do

(b) Over ground C.I. LINE

Scraping the hard scum of 'S' trap carefully to render the flushing flow easy after soaking with strong acid through W.C. pan on floor and also cleaning through flanged junction door underneath the ceiling including necessary scafolding and resetting the flanged door watertight by putty joints by methor labour

Removing chokage of water closet.

Dismantling & Refixing pit cover

Cleaning silt of inspection pit.

Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S- 12592(M.D) (vii) 1 MT load bearing capacity round manhole cover provided with two lifter hook with matching frame of size Cover: 450 mm X 40 mm Frame: 540 mm X 80 mm , opening: 360mm , Weight: 34 Kg. (approx)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately (A) For Exposed Work (a) (i) 15 mm dia. light quality

(b) (i) 20 mm dia. light quality

(c) (i) 25 mm dia. light quality

Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) in any position above ground……….. (a) For Exposed Work (i) 15 mm dia.

(ii) 20 mm dia.

(iii) 25 mm dia.

(v) 40 mm dia.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia

(v) 40 mm dia

(vii) 25 mm dia

Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long

Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (ii) 32 mm

Supplying, fitting and fixing C.I. bracket including two coats of painting. (a) Wash basin,

Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand).

f) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting & fixing Aluminium domical grating. (iii) 100 mm

Supplying, fitting and fixing C.I. round grating…………...(i) 100 mm

Supplying, fitting and fixing shower of approved brand and make. (h) Polythene overhead shower of approved make 15 mm X 125 mm

(f) Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). Superintendent room & Qtr.

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indian (ii) Plastic (hallow type) white.

(a) E.W.C. (ii) Plastic (hallow type) white.

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour. frame size 550 mm X 400 mm

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge.( Height- 12.20 Metre) preparing the set

Labour for shifting

Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin- Charge.

Washing & cleaning the wall surface & ceiling by soft detergent powder & soft water & render the surface free of dust, stain etc.

Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (a) Small plant of girth of exposed stem upto 75 mm.

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared)

Sub Total

Please Enable Macros to View BoQ information