Loading…
Loading…
Tender Value
₹14.6 L
EMD Value
₹15,000
Closing Date
23 Jun 2026, 6:00 pmDue tomorrow
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer’s office, Valsad (R&B) Division,
Repairing of Sump Room and Maintenance Office at Seva Sadan - 2, Valsad, Ta. Dist: Valsad
314637
08 Of 2026-27
Open
Civil - All
Valsad
8 documents required · 8 mandatory
₹900
Executive Engineer, Valsad (R&B)Division, Valsad
₹15,000
16 Jun 2026
16 Jun 2026
16 Jun 2026
23 Jun 2026
16 Jun 2026
Name of Work :-
Repairing of Sump Room and Maintenance Office at Seva Sadan - 2, Valsad, Ta. Dist: Valsad
Bill of Quantities
(A) Percentage Rate Tender (Up to INR 50 Cr. )
Memorandum showing items of work to be carried out
Ite Quantity Unit Estimated Total Amount
Ite Quantity Unit Estimated Total Amount
No. Item of work In figure estimated
Rs. Ps. quantities
1 Dismentaling tiled of stone floors laid in mortar including stacking of 101.60 Sqmt 48.21
serviceable materilas and disposal of unserviceable materials with all lead
2 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 2.00 Nos. 405.65
European type, flushing tank etc. including stacking the materials with all
3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 42.00 Rmt. 75.08
and clamps including stacking the materials with all lead and lift ( for any
4 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 6.00 Nos. 187.71
including chowkhats architraves, holdfasts and other attachment etc.
complete and stacking them within all lead and lift.(i) Not exceeding
5 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads 2.70 Sqmt 970.07
of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-
cement:3-coarse sand)finishing with flush pointing in colour cement
slurry etc. complete. Colour and Shade approved by Engineer-In-Charge
6 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 12.30 Sqmt 1441.22
8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on
10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with
white cement slurry.
7 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 5.00 Rmt. 72.65
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost
of all materials.
8 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 5.00 Rmt. 91.84
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost
of all materials.
9 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 10.00 Rmt. 148.12
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including cost of all
10 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 10.00 Rmt. 195.67
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
11 Providing erecting and fixing double coated (ISI) water tank of required 2000.00 Ltr. 3.95
capacity each with all necessary fittings and connection etc. complete on
12 Providing and fixing ball cock of approved. quality as directed.(A) Copper 2.00 Nos 189.84
Metal (ii) 50mm dia.
13 Providing laying (to level or slopes) and jointing reinforced concrete Light 30.00 Rmt. 665.48
duty non-pressure pipes I.S. class NP2 of the following internal diameter
with collars and butt ends prepared for collar joints including testing of
joints complete.(D) 300mm
14 Providing, laying and jointing in true line and level 75 mm dia. UPVC 10.00 Rmt. 698.92
SWRType B pipe conforming to IS 13592-1992 with one end plain and
other end socketed with rubbering and fitting conforming to ISI 14735-
1999 of approved make for drainage system pipe line, pipe shall be
jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as
directed including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
15 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 12.00 Rmt. 836.73
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost
of all materials.
16 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 2.00 Nos 15.66
17 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 2.00 Nos 28.79
18 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 2.00 Nos 571.08
diameter with jali of the following nominal diameter of self cleansing
design with C.I scread down or hinged grating including the cost of
cutting and making good the walls.
19 Providing and fixing screw down bib taps of following size.(B) Brass 2.00 Nos 186.83
chromium plated screws down Bib Tap. (i) 15mm dia.
20 Providing and fixing brass screw down stop tap.(A) 15mm dia. 2.00 Nos 205.83
21 Providing and fixing pillar tap, capstan head, screw down high pressure 1.00 Nos 308.73
with screws, shanks and back nuts. (i) 15mm dia.
22 Providing and fixing wsh down water closet (European type, W.C. Pan) 1.00 Nos 1303.71
with integral P or S trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be
measured and paid for separately (A) vitreous China Pattern :(i) in white
23 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 1.00 Nos 2344.42
C.I. or Mild brackets, complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with polythene float, C.P
brass handle unions and couplings for connections, with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled flush bend including
cutting holes in walls and making good the same connecting the flush
bend with cistern and closet (overflow pipe to be measured and paid for
separately)(A) Vitreous China (I) In white colour
24 Providing and fixing plastic seat and cover for wash down water closer 1.00 Nos 291.33
with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.
25 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 1.00 Nos 355.52
long with wall hook and other accessories etc. completed
26 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 1.00 Nos 1961.83
M.S. brackers painted white including cutting holes and making good the
same including pillar tap, Brass waste, stop cack , bottle trap and M I
fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size
including all necessary fittings etc complete shade and pattern as
approved by Engineer in charge.
27 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 1.00 Nos 833.73
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers.
28 Providing and laying (two level or slopes) and jointing with stiff mixture of 30.00 Rmt. 518.84
Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes
150mm laying lime concrete 1:5:10 (1-Lime putty :5-Fine samd : 10-
Graded Stone aggregates 40mm nominal size) bedding for stoneware
pipes of following internal diameters with necessary formwork and curing
complete.(B) 150mm dia
29 Providing and fixing S.W. gully trap with C.I. grating brick masonry 2.00 Nos 1246.92
chamber and water tight C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm
size P or R type
30 Constructing brick masonry chamber for underground C.I. Inspection 2.00 Nos 3208.77
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal
dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size) foundation concrete
1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm and 450mm deep for
single pipe line.
31 Constructing brick masonry chamber for underground C.I. Inspection 2.00 Nos 3916.78
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm
size) foundation concrete 1:5:10 inside plaster 15mm thick with cement
mortar 1:3 finished smooth with a floating coat of neat cement on walls
and bed concrete etc. complete.(i) Inside dimensions 500mmx 700mm
and 450mm deep for single pipe line.
32 Extra over items for every additional depth of 0.1M. of part thereof 2.00 Nos 242.39
beyond 450mm depth for Brick masonry chamber.(i) for 455mm x
33 Extra over items for every additional depth of 0.1M. of part thereof 2.00 Nos 264.86
beyond 450mm depth for Brick masonry chamber.(i) for 500mm x
34 Removing and scraping of old deteriorated plaster of any thickness 382.00 Sqmt 19.57
fromm wall / R.C.C member including stacking of serviceable material and
disposal of unserviceable from site of work with all lead and lift
35 Providing 15mm thick cement plaster in single coat on Rough (Similar) 150.00 Sqmt 153.20
side of single or half birck walls / concrete wall for interior plastering and
finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish
etc. comp. For Ground floor
36 Providing 10 mm. Thick cement plaster in single coat for plastering on 82.00 Sqmt 140.95
ceiling and soffits of stairs and finished even and smooth in : (I) Cement
mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor
37 20mm thick sand faced cement plaster on walls upto height 10 metres 150.00 Sqmt 300.66
above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-
cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-
sand) etc. complete.
38 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 81.40 Sqmt 1073.13
treads of steps and landing laid on a bed of 12mm thick cement mortar
1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white
39 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting 5.20 Sqmt 1141.45
risers of steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-
coarse sand) and jointed with white cement slurry
40 Applying general insecticide pest control treatment to floor,cupboards 81.40 Sqmt 89.28
etc including labour materials etc.complete.using lmidacloprid 30.5 Scas
per IS 6313 part -III ( 0.075% concentration by mass ) is recommended
10.5ml chemical diluted with 5 liter of water application 0.5 liter chemical
/ Sqm of surface is recommended as per I.S.
41 Supplying submersible pump set suitable for bore of 150 mm. dia. or 1.00 Nos 33557.25
more having three phase motor capacity not more than 7.5 H.P. with
following capacity .. (B) ( 8 stage) 390 to 350 LPM discharge at 62 to
mtrs. head respectively suitable for 50mm dia. delivery pipe Cat.III
42 Lowering of submersible motor pump set at the depth of following 1.00 Job 2568.43
,complete with required. Nos. and size of casing pipes erected by means
of proper chain pulley block & pipe wrenches after checking of threads of
each pipe with coupling to take the load of the pump set and pipe
assembly filled up with water (B) Above 60 mtrs. and Up to 120 mtrs.
43 Providing and fixing gun metal cock of non return full way wheel valve.(F) 2.00 Nos 858.50
44 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 50.00 Rmt 602.70
(Medium grade) of the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor.(E) 40mm
45 Applying two coats of putty & two coats of primer of approved brand and 232.00 Sqmt 40.59
manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth.
46 Wall painting (two coats) with plastic emulsion paint of approved brand 150.00 Sqmt 80.35
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
47 Wall painting (two coats) with plastic emulsion paint of approved brand 82.00 Sqmt 85.76
and manufacture on undecorated ceiling surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
48 Finishing wall with weather proof exterior emulsion paint on wall surface 150.00 Sqmt 114.53
(two coats) to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose powdered
materials.etc complete
49 Providing and fixing window having extruded aluminum Colour anodized 17.00 Sqmt 2201.80
section frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-
0.738/Rmt) horizontal two track and Vertical member of size 92.00 mm x
31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with Two Glass shutters &
One Shutter Mosquito Net of horizontal member size 40mm x 18mm x
1.29mm ( @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x
1.29mm with 5 mm thick transparent bronze colour tinted float glass
with powder coated aluminum fittings & fixtures and Lock Strip
transparent silicon sealant glass fixing to frame as per details etc
complete for window.W,W5
50 Providing & Fixing in position standard extruded approved colour 2.00 Sqmt 2049.29
anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box
Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For
ventilation including all required materials, fixtures, fastenning, labours
and equipments as per detailed drawing as directed. For Ventilators V,V1
51 Providing and fixing 35 mm thick flush door Single shutter, solid core 21.00 Sqmt 3157.26
with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one
,melamine faced three layred resin Flushed Door Having Decorative
Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM
HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle
and necessary Locking system of Godrej, zinc coated hinges ,fixtures &
fastenings etc directed by engineer in charge.D2
52 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 5.00 Sqmt 2547.22
depress panel Single shutter having extra reinforcement on sides & edges
in Gel coat finish.The core of the shutter & frame is to be filed up with
injected fire retradat grade polyurethene foam done in situ along with
embeded wooden pieces for stiffening & also taking hinges &
fintures.The whole FRP frame & shutter is to be waterproof,
weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to
be inclusive of S.S hinges with necessary screws & alluminum fixtures &
fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-
53 Providing and fixing Mirror polished 18 mm thick Granite stone in Single 27.30 Sqmt 2966.37
piece with full round edge and polished of approved quality in clading on
Cill & Jambs and around the doors/ windows/ ventilation with 12 mm
thick cement motor CM (1:4) and fixing with cement slurry & adhesive
including moulding of exposed edges as directed by engineering in charge
54 Providing U.P.V.C sheet roofing fixed with glavanished iron J or L Hooks, 201.30 Sqmt 959.50
Bolts and G.I. limpet washer or G.I. limpet washer. filled with white lead
complete. (1) 2.50 mm thick sheet.
55 Steel work, welded in built up sections framed work including cutting, 40.30 Qnt 9047.86
hoisting, fixing in position and applying a priming coat of red lead paint.
(A)In beams and joists, channels angles Tees, flats, with connecting plates
or angle cleats as in main and cross beams. Hip and jack rafters, purlins
conneted to common rafters and the like
56 Providing and fixing pre-cast Rubber Dye inter locking concrete block 410.00 Sqmt 686.90
60mm thick with grade of concrete M300 pnumatic compressed/Vibrated
mechanically and as per approved design confieming to IS 15658:
including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc complete.
In Words Fourteen Lakh Sixty Four Thousand Eight Hundred Ninety One Rupees And Ninety Two Paisa Only.
I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the
estimated rates mentioned above amount of my/your tender works out as under.
*Estimated Amount *Estimated Amount
put to Tender Rs. 1464891.92 put to Tender Rs.
Deduction …………….. % below………………… Add ………… % above Rs. …………….
1 The Credit Value of Dismentalled Materials of Amount Rs.9240.00 (In Words Nine Thousand Two Hundred Forty Rupees And
Zero Paisa Only.) shall be recovered from the 1st Running Bill of the Contractor.
2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with
detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-
3 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.
4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor
under his sign.
5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work
under all condition, site, moisture/ weather etc.
6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government
Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the
7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by
Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to
8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other
Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated
9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no
9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of
Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.
10 Contractor are advised to visit site before loading tender rate.
11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and
drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his
12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.
13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.
14 GST and Income tax TDS will be deducted at a source while making payments of bills.
15 GST will be paid extra as per Govt. amendment.
16 The Materials on the work shall have to be used and carried out as specified in technical note.
I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding
(A) materials,Labour and other factors pertaininfg to work before submitting tender.
I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender
Document of this work and agree to execute the same accordingly.
Deputy Executive Engineer
Valsad (R&B) Sub-Division
Signature of Bidder
Executive Engineer
Valsad (R&B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
7 GR 1.pdf
Building Booklet civil.pdf
BOQ.pdf
NIIT.pdf
SBD.pdf
Specification Sump Room.pdf
GR.pdf
Download all tender documents and submit your bid