Reti Kankari 2025-26 Construction of Boys Toilet, Girls Toilet, Shade AND Pipe Culvert in Various Primary Schools Of Mandvi Taluka SRT/ MNDV/RETI-KANKAR/ PKG NO. 5 / Total-3 Primary School (1) Goddha (2) Uteva (3) Varethi Ta.Mandvi Di.Surat (2ND TIME)

Name of work:-Reti Kankari 2025-26 Construction of Boy's Toilet, Girls Toilet, Shade & Pipe Culvert in Various

Primary Schools Of Mandvi Taluka SRT/ MNDV/RETI-KANKAR/ PKG NO. 5 / Total-3 Primary School (1)

Goddha (2) Uteva (3) Varethi Ta.Mandvi Di.Surat

Bill Of Quantities (A)

Percentage Rate Tender

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 M depth including sorting 122.02 Cmt 122.66

out and stacking of useful materials and disposing of the

excavated stuff upto 50 M lead (A) Loose And Soft Soil

2 Filling available excavated earth (excluding rock in trenches 29.30 Cmt 136.32

plinth, slides of foundations etc. in layers not exceeding 20 cm

in depth consolidating each deposited layer by ramming and

3 Filling in foundation and plinth with murrum or selected soil 81.60 Cmt 299.23

in layers of 20cm thickness including watering ramming and

consolidating etc. complete

4 Providing and laying cement concrete work 1:2:4 (M-150) (1- 11.20 Cmt 3786.96

Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base or columns and Mass

5 Brick work using common burnt clay building brick having 8.36 Cmt 4173.77

crushing strength not less than 35 kg/sq. cm. in foundation and

plinth in cement mortar 1:6 ( 1 Cement: 6 fine sand) (B)

6 Providing and laying Cement Concrete 1:2:4 (M-150) and 9.80 Cmt 4206.65

curing complete Including the cost of formwork But

Excluding the cost of reinforcement for reinforced concrete

work in R.C.C. Plinth Slab.

7 Providng TMT bars renforcement of FE 500 / 500D for 2404.30 KG 69.66

R.C.C. work including bending binding and placing in

position complete for all floor.

8 Brick work using hydraulically pressed common burnt clay 22.80 Cmt 4503.04

building brick having crushing strength not less than 35 kg/sq.

cm. in super structure above plinth level up to floor two level

in cement mortar 1:6 ( 1 Cement: 6 fine sand) (B) up to floor

two level Conventional

9 Half brick masonary in hydraulically pressed common burnt 40.57 Sqmt 629.84

clay building bricks having crushing strenght not less than less

than 35 kg/sq. cm. in cement Mortar 1:3 ( 1 Cement : 3 coarse

sand) in superstructure above plinth level up to floor two level

Conventional (GF)

10 Providing and fixing standared extruded of alluminium section 8.80 Sqmt 1238.69

of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @

Wt. 0.643 Kg/mt) with colour Powder Coated alluminium

frame for Window & ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

11 Providing 20 mm thick sand faced cement plaster with Gutkha 33.30 Sqmt 249.47

Finish on wall upto all Full hight above ground level

consisting of 12mm thick backing coat of c.m. 1:3 (1 cement :

3 sand) and 8 mm thick finishing coat of c.m. 1:1 (1 cement :

1 sand) etc. complete For All Full Height.

12 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 3.00 Sqmt 1169.98

24'' x 24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry.

13 Providing & laying and jointing in true line and level 25 mm 26.00 Rmt 91.84

dia UPVC pipe (SCH-40) line including fitting make or

equivalent as approved by engineer in charge the pipe shole be

fixed on wall with the hel of clam at every two mtr center to

center or shall be conseled as direct including necessesary

fitting etc including testing of pipe and jointes and fixin the

sam with adhesive solvent including cost of matarial (A)

14 Providing & laying and jointing in true line and level 15 mm 34.00 Rmt 72.65

dia UPVC pipe (SCH-40) line including fitting make or

equivalent as approved by engineer in charge the pipe shole be

fixed on wall with the hel of clam at every two mtr center to

center or shall be conseled as direct including necessesary

fitting etc including testing of pipe and jointes and fixin the

sam with adhesive solvent including cost of matarial (A)

15 Providing and fixing brass screw down stop tap.(A) 15mm dia. 3.00 No. 240.38

16 Finishing wall with weather proof exterior emulsion paint on 203.56 Sqmt 119.75

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

17 Providing erecting and fixing double coated Syntex PVC. 2000.00 Litre 3.95

(ISI) water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

18 Providing and laying Ordinary cement concrete M.200 and 9.30 Cmt 3313.55

curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns and

19 Providing and laying Ordinary cement concrete M.200 and 3.84 Cmt 9141.58

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in

(D)Columns,Pillars posts and struts upto floor two level.

20 Providing and laying Ordinary cement concrete M.200 and 13.67 Cmt 6604.12

curing complete including the cost of formwork and excluding

the cost of reinforcement for R.C.C. work in

(C)Slabs,landing,shelves,Balconies Lintels, Beams, Girders

and Cantilever upto floor two level.

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

21 Providing 10 mm thick cement plaster in single coat on 455.00 Sqmt 123.21

brick/concrete wall/ Ceiling for interior plastering upto floor

two level finished even and smooth in(III)cement mortar 1:6

(1 cement : 6 sand)

22 Distempering with dry distemper of approved brand and 455.00 Sqmt 54.96

manufacture (two coats)and of required shade on wall surface

to give and even shade, over and including a priming coat of

whiting after thoroughly brooming the surface free from

mortar dropping and other foreign matter

23 Providing and laying polished Kota stone slab flooring over 16.60 Sqmt 1019.39

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete.

24 Providing and laying white glazed tiles 6mm thick in flooring 18.30 Sqmt 900.29

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

25 Providing and fixing 25mm thk flush door shutters fixing to 26.40 Sqmt 2927.99

M-25 RCC Pree Cast Door Frame of good quality and

approved by engineer incharge including all exposed inside

and outside faces shutter covered by 1.00mm thk textured

laminate sheet including all necessary S.S fixtures and

fastenings & nails,screws, adhesive materials etc complete

including all charges of fixing RCC preecast Frame and

Labour. Work shall be carried out as directed by engineer in

26 Providing and fixing M.S. grills of required pattern to wooden 222.80 KG 109.41

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

27 Painting two coats (excluding priming coat) on new steel and 8.80 Sqmt 92.87

other metal surfaces with enamel paint brushing, interior to

give enamel paint brushing, interior to give an even shade

including cleaning the surface of all dirt, dust and other

foreign matter.

28 Providing & fixing wash basin with single hole for pillar tap 4.00 No. 1533.32

with C.I. or M.S. brackets painted white including sutting

holes and making good the same, fittings. (A) Vitreous China:

(ii) Flat Back wash basin 550 mm x400 mm size. (i) White

Colour etc. complete.

29 Providing and fixing water closet squatting Pan (Indian type 12.00 No. 1002.17

W.C. Pan) size 580mm (A) Vitreous China.(I) Long

pattern = White colour, with Gully Trap of required Size as

suggested by engineer incharge.

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

30 Constructing brick masonry chamber for underground C.I. 8.00 No. 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1 cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

31 Providing & Fixing Ready made septic tank of 800 mm dia. 4.00 No. 3636.00

Including excavation of borrw pits laying in line &level etc

complete as directed .

32 Providing soak pit of 2.0 Cum volume including excavating 4.00 No. 1382.29

&filling brickbats with dry masonary work @ top for 45 cms

height includingProviding vatas in CM 1:3 with finishing

curring etc complete.

33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain 16.00 No. 599.64

- 100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

34 Providing and fixing Gun metal check or non-return fullway 12.00 No. 420.63

wheel valve.(C) 25mm dia.

35 Providing and fixing chromium plated brass half turn flush 16.00 No. 254.78

cock of approved quality including fixing in pipe line etc.

36 Providing and fixing screw down bib taps of following size 16.00 No. 158.86

(C) Gun Metal screw down bib tap (i) 15mm dia.

37 Providing and fixing to wall ceiling floor 10.0 kgf/cm2 34.00 Rmt 280.23

working pressure polythene pipes of the following outside dia

low density complete with special flage compression type

fittings, wall clips etc. including making good the wall ceiling

38 Providing & fixing parking shed using M.S. Pipe of 75 mm 140.00 Sqmt 2032.12

diameter in required shape and design including bending of

pipe and fixing it in CC M-150 foundation of required size

with 6 mm thick Lexan Polycarbonate Multi Wall Roofing

sheet including one coat of primer and two coats of oil

painting complete as directed.

39 Providing and filling in foundation with ordinary cement 11.00 Cmt 3325.30

concrete M100 mix and providing necessary vertical pin

headers including form work,vibrating, ramming and curing

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

40 Supplying and fixing reinforced concrete heavy duty non 30.00 Rmt 1968.37

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 Specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slope)of class

NP3 600mm diameter.

41 Supplying and fixing reinforced concrete heavy duty non 32.50 Rmt 1190.05

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 Specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slope)of class

NP3 450mm diameter.

42 Construction of Granular sub-base 100 mm thick by 45.00 Cmt 634.28

providing coasre graded machine crushed B.T. material

satisfying MOST specification of grading II (B.T. stone

aggregate 26.5 to 4.75 mm - 75 % and 2.36 mm below - 25 %

) including spreading in uniform layer with motor grader on

prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller to

achieve the desired density etc. complete.

Deputy Executive Engineer

Panchayat (R&B) Sub-Division

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be written in figures

and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put To Tender Rs…..1431169.83 Put To Tender Rs…..1431169.83

Deduct ……. % below Rs……………………..…. Add ……. % Above Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In – Charge for which no

extra payment shall be made.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of the contractor Executive Engineer

કોન્ટ્રાકટરની સહી Panchayat (R&B) Division