Repair work of Govt. I.T.I Building at Palampur Distt. Kangra (HP) (SW- P/L Interlocking Paver Block, Painting, Plaster repair, Tile work, Steel work, Demolishing in CC work and Prepainted sheets in Chajjas etc) (Deposit Work)

Amount

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (Twenty milimetre) nominal size) , as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer of cera/ orient bell/ johnson/RAK), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve milimetre) thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave,holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres & below as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in?charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete excluding form work in foudation and plinth , as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(non modular) bricks:, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers, as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.(A/R)

RISHI KUMAR TUTANIEA

MOHIT SHARMA

AMIT SHARMA

VIJAY KUMAR

ASHUTOSH PAUL

DOLORARTZ PRIVATE LIMITED