Construction of Nagarpalika Library at Patdi, Dist. Surendranagar (2nd Attempt)

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Clearing and grubbing road land including uprooting rank vegetation Twenty Eight

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of Thousand Three

1 stumps of trees cut earlier and disposal of unserviceable materials (C) Hectare 0.13 28,393.04 Hundred Ninety

By mechanical means in area of light jungle Three Rupees

Three Paise

Excavation for foundation in sand, gravel, clay soft soils and murrum etc.

including shoring, strutting dewatering as necessary and disposing of the Four Hundred

2 excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m Cmt 697.70 486.77 Eighty Six Rupees

for 10 Cum Seventy Six Paise

Excavation for foundation in sand, gravel, clay soft soils and murrum etc.

Five Hundred

including shoring, strutting dewatering as necessary and disposing of the

Seventy One

3 excavated stuff as directed.(B) Depth from 3.0 to 6.0 M.and lead upto Cmt 62.10 571.08

Rupees Eight

100m for 10 Cum

Filling in plinth and foundation with sand under floors including Four Hundred

watering ramming, consolidating and dressing complete Twenty Four

Rupees Eighty

Nine Paise

Two Hundred

20cm. thickness including watering, ramming and consolidating etc.

5 Cmt 311.70 282.02 Eighty Two

complete. (more than 10 ton)

Rupees Two Paise

Filling available excavated earth (excluding rock) in trenches.

One Hundred

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth

6 Cmt 519.20 130.39 Thirty Rupees

consolidating each disposited layer by ramming and watering.

Thirty Nine Paise

Providing and filling rubbles including hand packing and filling interstices One Thousand

7 with quarry spalls behind abutments and between returns as directed. Cmt 59.80 1,064.80 Sixty Four Rupees

Eighty Paise

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including

labour and material consistent with I.S.I specification. Using Chlordane

and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

percent is recommended i.e one liter 20 EC chemical emulsion with 19 Fifty Six Rupees

liter give 1 % concentration inclusive of one liter chemical emulsion Sixty Three Paise

application at the rate of 5 Liter chemical/ Sqm of surface is

recommended as per I.S. (The Product performance shall carry

Guarantee for 10 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : Three Thousand

4- graded stone aggregates 20 mm nominal size) and curing complete Six Hundred

9 excluding cost of formwork in (A) Foundation and Plinth Cmt 150.60 3,631.49 Thirty One

Rupees Forty

Eight Paise

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : Three Thousand

6- crushed stone aggregates 20 mm nominal size) and curing complete Nine Hundred

10 including cost of formwork in (A) Wall Caps / Coping Cmt 0.00 3,974.36 Seventy Four -

Rupees Thirty Six

GRADE SLAB (M200) : Providing and laying controlled cement concrete

M.200 Concrete with all lead, including all transportation, pumping, Four Thousand

pouring, curing of concrete etc complete including the cost of formwork Six Hundred Sixty

but excluding the cost of reinforcement for reinforced concrete work in Two Rupees Ten

M200 Grade Slab Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Four Thousand

vibrator curing centering & shuttering in true line and level etc, but Six Hundred

12 excluding the cost of reinforcement for RCC work in Foundations Cmt. 108.50 4,626.81 Twenty Six

footings, base of columns and Raft etc., for any type of cross section Rupees Eighty

area complete as directed by E. I. C. One Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but

Hundred Seventy

13 excluding the cost of reinforcement for RCC work in column up to plinth Cmt. 10.50 6,579.14

Nine Rupees

lvl. etc., for any type of cross section area complete as directed by E. I. C.

Fourteen Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but

Hundred Four

14 excluding the cost of reinforcement for RCC work in TIE, GROUND, & Cmt. 27.70 6,504.40

Rupees Forty

PLINTH BEAMS for any type of cross sectional area. etc., complete as

directed by E. I. C.

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but

Five Hundred

excluding the cost of reinforcement for RCC work in (F) Wall (Vertical

15 Cmt. 28.70 7,597.52 Ninety Seven

and horizontal fins)., & (F1) Wall cap & coping up to G.F. level., etc.

Rupees Fifty Two

Complete, as per detailed & directed by Architect / Consultant & and

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but

Six Hundred

excluding the cost of reinforcement for RCC work in (F) Wall (Vertical

16 Cmt. 2.70 7,637.82 Thirty Seven

and horizontal fins)., & (F1) Wall cap & coping For First Floor level., etc.

Rupees Eighty

Complete, as per detailed & directed by Architect / Consultant & and

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but Seven Thousand

excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Six Hundred

and horizontal fins) & (F1) Wall cap & coping For For Second Floor level., Seventy Eight

etc. Complete, as per detailed & directed by Architect / Consultant & Rupees Two Paise

and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but Five Hundred

18 excluding the cost of reinforcement for RCC work in (D) For Columns for Cmt. 16.70 7,583.69 Eighty Three

any type of cross sectional area for G.F. Lvl. etc., for any type of cross Rupees Sixty

section area complete as directed by E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but Six Hundred

19 excluding the cost of reinforcement for RCC work in (D) For Columns for Cmt. 15.90 7,623.88 Twenty Three

any type of cross sectional area Work at First floor etc., for any type of Rupees Eighty

cross section area complete as directed by E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but

Six Hundred Sixty

20 excluding the cost of reinforcement for RCC work in (D) For Columns for Cmt. 5.30 7,664.18

Four Rupees

any type of cross sectional area Work at Second floor etc., for any type

Eighteen Paise

of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

21 excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Cmt. 13.60 6,735.29 Thirty Five

LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc., Rupees Twenty

complete as directed by E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

22 excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Cmt. 6.20 6,775.48 Seventy Five

LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc., Rupees Forty

complete as directed by E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Eight Hundred

23 excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Cmt. 4.40 6,815.78 Fifteen Rupees

LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc., Seventy Eight

complete as directed by E. I. C. Paise

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

Six Thousand

including finishing the exposed surfaces with cement mortar 1:3 (1-

Seven Hundred

24 cement, 3 Fine sand) to give a smooth and even surface centering and Cmt. 8.90 6,765.99

Sixty Five Rupees

formwork and curing complete excluding cost of reinforcement. etc.,

Ninety Nine Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

25 excluding the cost of reinforcement for RCC work in SLAB BEAMS for Cmt. 27.20 6,735.29 Thirty Five

Ground floor & Super structure, & for any type of cross sectional area. Rupees Twenty

etc., complete as directed by E. I. C. Eight Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

26 excluding the cost of reinforcement for RCC work in SLAB BEAMS at First Cmt 19.80 6,775.48 Seventy Five

Floor & for any type of cross sectional area. etc., complete as directed by Rupees Forty

E. I. C. Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Eight Hundred

27 excluding the cost of reinforcement for RCC work in SLAB BEAMS at Cmt 5.20 6,815.78 Fifteen Rupees

Second Floor to Terrace Floor & for any type of cross sectional area. etc., Seventy Eight

complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Six Thousand

vibrator curing centering & shuttering in true line and level etc, but

Four Hundred

28 excluding the cost of reinforcement for RCC work in Staircase with steps Cmt 13.20 6,451.58

Fifty One Rupees

/ Kadi Tappa, waist slab and landing at any height and level as directed

Fifty Seven Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but

Hundred Fifty

29 excluding the cost of reinforcement for RCC work at Plinth to Ground Cmt 41.70 6,552.17

Two Rupees

FLOOR SLAB for all thickness/cross section etc. complete as directed by

Seventeen Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but Hundred Ninety

excluding the cost of reinforcement for RCC work at FIRST FLOOR SLAB Two Rupees Forty

for all thickness/cross section etc. as directed by E. I. C. Seven Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand Six

vibrator curing centering & shuttering in true line and level etc, but Hundred Thirty

excluding the cost of reinforcement for RCC work in SECOND FLOOR Two Rupees Sixty

SLAB for all thickness/cross section etc. complete as directed by E. I. C. Seven Paise

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including Eighty One

32 bending, binding and placing in position complete upto ground floor Kg 34129.00 81.33 Rupees Thirty

level Two Paise

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including Eighty Two

33 bending, binding and placing in position complete upto First floor level Kg 11086.00 82.35 Rupees Thirty

Four Paise

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including Eighty Three

34 bending, binding and placing in position complete for Second floor to Kg 3813.00 83.37 Rupees Thirty Six

terrace floor Lvl. Paise

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Four Thousand

35 Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Cmt 38.20 4,021.02 Twenty One

Rupees Two Paise

Brick work using common burnt clay building bricks having crushing Four Thousand

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Two Hundred

36 Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor Cmt 44.60 4,289.33 Eighty Nine

etc. Complete. Rupees Thirty

Brick work using common burnt clay building bricks having crushing Four Thousand

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar Three Hundred

37 1:6 (1-Cement :6-finesand) (B) Conventional For First Floor etc. Cmt 45.30 4,329.82 Twenty Nine

Complete. Rupees Eighty

Brick work using common burnt clay building bricks having crushing

Four Thousand

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor Lvl.

Three Hundred

38 in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For above Cmt 26.40 4,370.31

Seventy Rupees

First Floor to Terrace Floor etc. Complete, as per detailed & directed by

Thirty One Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Six Hundred Fifty

39 Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Ground Smt 84.40 651.67 One Rupees Sixty

Floor level.(B) Conventional Seven Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Six Hundred Fifty

40 Cement : 4 -coarse sand ) (B) Conventional half brick masonry at First to Smt 98.00 657.67 Seven Rupees

Terrace Floor Lvl.(B) Conventional Sixty Seven Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Six Hundred Sixty

41 Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Terrace Smt 20.50 663.67 Three Rupees

Floor Lvl.(B) Conventional Sixty Seven Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any Three Hundred

height with all labour & material, etc. Complete, as per detailed & Twenty Six

directed by EIC. Rupees Twelve

Providing 15mm thick cement plaster in single coat on Rough

One Hundred

(Similar)side of single or half brick walls for interior plastering for

Sixty Three

43 Ground floor level and finished even and smooth in (ii) Cement mortar Smt 386.10 163.85

Rupees Eighty

1:4 (1-cement :4-sand)

Five Paise

Providing 15mm thick cement plaster in single coat on Rough

One Hundred

(Similar)side of single or half brick walls for interior plastering for First

44 Smt 394.60 186.61 Eighty Six Rupees

floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-

Sixty Paise

cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering at Second Two Hundred

45 Floor to Terrace floor level and finished even and smooth in (ii) Cement Smt 130.10 209.36 Nine Rupees

mortar 1:4 (1-cement :4-sand) Thirty Six Paise

Providing 10mm thick cement plaster in single coat on brick/concrete

One Hundred

Ceiling for interior plastering for Ground Floor level and finished even

Forty Seven

46 and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Smt 282.90 147.94

Rupees Ninety

Four Paise

Providing 10mm thick cement plaster in single coat on brick/concrete

Ceiling for interior plastering for First Floor level and finished even and One Hundred

47 smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Smt 266.60 170.70 Seventy Rupees

Seventy Paise

Providing 10mm thick cement plaster in single coat on brick/concrete One Hundred

Ceiling for interior plastering at Second Floor to terrace floor Lvl. and Ninety Three

finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Rupees Forty Five

Providing and applying Texturer finish on RCC elements to give expose

finish of approved shade and brand. Job includes proper griding of RCC One Thousand

49 joints before applying texture, complete with scafolding directed as per Smt 427.10 1,016.12 Sixteen Rupees

Architect and EIC Twelve Paise

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick

cement plaster in cement mortar (1 Cement:4 coarse sand) in rough Two Hundred

50 finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement: 2 Smt 427.10 270.43 Seventy Rupees

Coarse sand) finished rough / with Trovel including scaffolding curing Forty Two Paise

etc. complete.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1

cement : 4 coarse sand ), furrowing the under layer with scratching tool,

applying cement slurry on the under layer @ 2 Kg of cement per square

metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse Nine Hundred

Ninety Five

51 sand : 2 stone chipping 10 mm nominal size), in panels with groove all Smt 473.00 995.30

around as per approved pattern, including scrubbing and washing the Rupees Thirty

top layer with brushes and water to expose the stone chippings Paise

,complete as per specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

Forty Rupees

52 projections. Rmt 551.90 41.00

Ninety Nine Paise

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

Nine Hundred

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

Seventy One

53 grey cement slurry mixed with pigment to match the shade of slab Smt 480.90 971.95

Rupees Ninety

including rubbing and polishing etc. complete. (A)

Five Paise

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

One Thousand

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

54 Smt 40.90 1,056.26 Fifty Six Rupees

pigment to match the shade of slab including rubbing

Twenty Five Paise

and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

One Thousand

fixing on existing flooring by adhesive material including dismentaling of

Three Hundred

existing flooring and jointed with color cement slurry including finised

55 Smt 33.50 1,397.83 Ninety Seven

with flush pointing & cleaning the surface etc. complete for antiskit.

Rupees Eighty

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or

as specified in skirting risers of steps and dedo on 10mm thick. cement One Thousand

plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement One Hundred

slurry as per the detailed by Architect & direction of Engineer-in- Charge. Forty One Rupees

Forty Five Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps

and landing laid on a bed of 12mm thick Water proof cement plaster

with mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical One Thousand

Agent and cement vata (10cm. x 10 cm. size) quarter round in cement One Hundred

57 mortar 1:1 including neat cement finishing, watering etc. complete Smt 34.00 1,156.60

Fifty Six Rupees

finishing with flush pointing in white cement. (For UG tank flooring) Sixty Paise

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps

One Thousand

and dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-

One Hundred

cement : 3- coarse sand ) & Water Proofing Chemical Agent and finishing

58 Smt 99.00 1,153.67 Fifty Three

with flush pointing in white cement. (For UG Tank walls)

Rupees Sixty

Seven Paise

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished, machine

cut Granite of any colour and shade, & finish, as per detailed by architect

/ Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen

platforms, vanity counters, window sills , fascias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick

mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting Three Thousand

Three Hundred

59 on In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 Smt 159.00 3,396.63

coarse sand), joints treated with white cement, mixed with matching Ninety Six Rupees

pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO 6 Sixty Three Paise

mm as per detailed groove, rubbing, curing, moulding and polishing to

edges to give high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or One Thousand

L.M. 1.1.5 laid over and jointed with grey cement slurry including Thirty Eight

rubbing and polishing etc. complete. (B) 30mm thick. Rupees Seventy

Providing and fixing sandwich type platform including supplying and

fixing granite stone 18 mm thick mirror polished stones in top and side

Seven Thousand

position and vertical strip at front over 25 mm thick polished kota stone

Three Hundred

platform fixing in top and sides and intermediates supports fixing with

61 Smt 3.00 7,335.13 Thirty Five

cement mortar and adhesive and finishing including making recess for

Rupees Twelve

Kitchen/ Laboratory sink etc. complete as approved and directed by

Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme Seven Hundred

out upto surface using white cement including rounding off junctions Forty Seven

62 and extending them upto 15 cm along the wall,clearing with water and Smt 275.30 747.29

Rupees Twenty

oxalic acid etc. as directed. (The Product performance shall carry Eight Paise

Guarantee for 10 years)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

coarsesand: 4-graded stone aggregate 20mm nominal size) laid in one Three Hundred

layer and finished with a floating coat of neat cement. (B) 50mm thick. Twenty Two

Rupees Ninety

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in

position with hold fast lugs or with dash fasteners of required dia &

length Incl. Providing and fixing 35 mm thick (or as specified) ISI marked

flush door shutters conforming to IS : 2202 (Part I) decorative type, core

of block board construction with frame of 1st class hard wood, with

1mm. thk, ISI marked designed laminate in any finish on both faces of Six Thousand

shutters., slit openings with bidding Patti & 6mm thk designed acid wash Seven Hundred

64 glass,. Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with Smt 41.20 6,732.10

Thirty Two

necessary screws, using branded S.S. matt /glossy / platinum finished Rupees Ten Paise

accessories, Colour / polishing all bidding parts, and also incl. with all

Material, labour, tools, tolerance, scaffolding etc. complete as per

concept /direction and approved by Architect, and directed by Engineer-

In-Charge.

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/ Openable

window/door with Required thick toughened designer glass of Saint

Gobain or equielent, is used for Aluminum Hi-Profile Section with

necessary accessories and with additional shutter with Stainless Steel

Mosquito net. [In Opening Position always one of Mosquito net shouter

should be in Close Position], captive bead, extremely difficult to remove

once glazed, high performance weather stripping, internal wedge gasket,

Bottom, side and top section including necessary filling up the gaps at

junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx. Seven Thousand

Seven Hundred

65 Premium" Required Finish door fixture Accessories As per Architect Smt 112.40 7,742.61

Concept, High security interlocking bead, Sheet membrane flashing , 2" Forty Two Rupees

over jamb flashing, New Blocking with new backer rod and sealant, Sixty Paise

channel glide with runner, slide fold hinge when ever need of sufficient

capacity, with warranty, all types of material, labour, transportation,

tools tolerance and matching required level with Flooring etc. complete

as per Architect concept and as per detailed by Architect / consultant &

Directed by EIC.

Providing and fixing standared extruded of alluminium section of size

One Thousand

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

One Hundred

alluminium frame for ventilation with 5 mm thick frosted glass as details

66 Smt 4.50 1,175.56 Seventy Five

etc complete for Ventilation

Rupees Fifty Five

Providing and fixing hydraulic door closer of approved size and make as

Six Hundred

directed engineer in charge. all lift, level and leads.

67 Each 10.00 639.11 Thirty Nine

Rupees Ten Paise

Providing & Fixing M.S. grills of required pattern to wooden frames of

windows, RCC or as specified in drawings etc. with M.S. flats at required One Hundred One

68 spacing & frame around, square or round bars with round headed bolts Kg 4930.00 101.17 Rupees

& nuts or by screws (A) Plain Grill, as per detailed & directed by EIC. Seventeen Paise

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel

section, Bar , hollow box or Z purloins, Round or Square Pipes, of

approved make, for built up purloins, roof trusses, columns, side

runners, tie beams, sag rods, base plates gusset plates, cap plates,

bearing bracing, gantry girders, rails, require support, pipes, including all

welded or bolted steel structures of various types with approved I.S.I.

mark electrodes, bolts, anchor bolts including cost of thread, Anchor

plate cleats etc. in RCC or masonry work, including cutting, bending,

welding ,fixing, supplying , Fabricating Decorative fevisted section or any One Hundred

Twenty Seven

69 structured member required to complete the job for Bridge, Trusses, Kg 1756.00 127.95

Canopy, doors, Frame, Railing, Entrance gate, pergola, Decorative Rupees Ninety

hanging light , New window, parking shed or space frame or any other Four Paise

required specified area as shown on drawing and detailed specification

or as per design incl. three coats of approved brand primer and two

coats of paints, necessary scaffolding, tools tolerance etc. complete as

directed by Engineer In Charge. (payment will be made for weight of

metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after One Hundred

70 thoroughly brushing the surface to remove all dirt, and remains of loose Smt 475.30 114.53 Fourteen Rupees

powdered materials.etc complete. Fifty Three Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Wall painting (two coats) with plastic emulsion paint of

approved brand & manufacture on undecorated wall surfaces to give an One Hundred

71 even shade including thoroughly brushing the surface free from mortar Smt 1047.50 119.49 Nineteen Rupees

droppings & other foreign matter & sand papered smooth, as per Forty Nine Paise

detailed & directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Ceiling painting (Two coats) with plastic emulsion paint of

One Hundred

approved brand and manufacture on undecorated Ceiling surface to give

Twenty Four

72 an even shade including thoroughly brushing the surface free from Smt 632.60 124.76

Rupees Seventy

mortar droppings and other foreign matter and sand papered smooth,

Five Paise

as per detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other metal

One Hundred

surface with enamel paint, brushing, interior to give an even shade

Twenty Two

73 including cleaning the surface an even shade including cleanicn the Smt 246.50 122.81

Rupees Eighty

surface of all dirt, dust and other foreign matter.

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat 15-18 micron. The PPGI Eight Hundred

74 Sheet shall have plastic protective guard film of minimum 25 microns to Smt 10.00 858.67 Fifty Eight Rupees

avoid scratches during transportation. The ridge shall be fixed to the Sixty Seven Paise

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia

SS pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade

with glossy finish consisting of 32 NB or nearest size vertical posts

Height at maximum spacing 900c/c with suitable cups at bottom and top

rail of 50 NB or nearest size & intermediate rails of 16 NB or nearest size

etc complete] with complete assembly of SS studs to house the

horizontal 16mm pipes and top handrail, bend and coupler to be used as Three Thousand

per architectural detail drawings for the railing in parapet, stair etc. Six Hundred Forty

75 including fabricating, hoisting, fixing in position with angle cleats, Rmt 51.80 3,646.91

Six Rupees Ninety

holdfast etc. in RCC or masonry in true line level and plumb, including Paise

complete assembly, including matt polishing and buffing complete,

including scaffolding etc. complete as directed by EIC.(Actual length of

stair railing shall be measured at site & same shall be paid. No wastage

should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB

or nearest size complete] with complete assembly, bend and coupler to

be used as per architectural detail drawings for the railing in parapet,

stair etc. including fabricating, hoisting, fixing in position with angle One Thousand

cleats, holdfast etc. in RCC or masonry in true line level and plumb, Three Hundred

76 including complete assembly, including matt polishing and buffing Rmt 38.30 1,356.18

Fifty Six Rupees

complete, including scaffolding etc. complete as directed by EIC.(Actual Seventeen Paise

length of stair railing shall be measured at site & same shall be paid. No

wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc. Seven Thousand

Six Hundred Ten

77 complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Smt. 4.50 7,610.66

Retro reflective sheeting from original manufacturer & a certified copy of Rupees Sixty Six

3 year outdoor exposure test report from third party test lab for the Paise

product offered shall be submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT of

1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700% Nine Hundred

Seventy Nine

78 4. Dosage 1.2 - 1.5 kg/m2 in two coats Smt 296.30 979.14

5. Tack Free Time 24 - 48 hrs Rupees Fourteen

6. Tensile Strength N/mm² ≥ 2.2 Paise

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

Six Hundred

compressed / vibrated mechanically and as per approved design

Eighty Three

79 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling Smt 800.00 683.88

Rupees Eighty

and filling the joint with sand in proper line and level as per guidlines of

Eight Paise

IRC SP 63-2018 etc. Complete

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length, 30cm height and 15cm thick of M200 grade Three Hundred

concret as per approved design and including excavation for fixing in Eighty Three

proper line and level, filling the joint with C:M 1:3 (1 cement:3 fine sand) Rupees Thirty

etc complete. Seven Paise

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: 1:2:4 Cement

Concrete laid in required slope at concrete floor as directed and

specified using necessary steel form work with M.S. Channels including

forming construction & contraction joints 4 mm to 6mm wide by cutting

the floor up to ¼ th depth of thickness of the concrete depth using

mechanical saw and sealing the joint with poly sulphide sealant up to

full depth of cutting including providing & fixing M.S. dowels bars with Seven Thousand

bitumen painted of full length as shown in drawing as to form the bays One Hundred

81 not exceeding 6.0 m X 4.5 m etc. complete as per directed by Architect Cmt 7.50 7,117.17 Seventeen

or Engineer-In-Charge. For all level and leads.(a) For RCC Road Note: Rupees Sixteen

Rates are Incl. cost of Cement Concrete Pavement shall be 150mm. Thk. Paise

or as detailed and rolling 2 times as per mentioned above and also all

tools tolerance, shuttering, channel, etc. complete as per detailed &

Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR

type B pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using PVC Eight Hundred

clamps of the size 160mm dia x 210mm length x 196mm high at every Thirty Five

82 2000mm centre to centre or shall be concealed in wall as directed Rmt. 57.50 835.15

Rupees Fourteen

necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint & Paise

jointed with adhesive solvent, cement incl. cost of all material etc.

complete as per detailed, directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as Twenty Four

per IS 9079 at departmental stores with following MOC: Casing: CI- Thousand Two

FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head Hundred Forty

Control panel- DOL / Star Delta starter suitable for local & remote pump

Six Thousand

control application consisting of MPCB, overload relay and contactors as

Nine Hundred

per Type II coordination including digital voltmeter, analogue ammeter

84 Nos 1.00 6,993.24 Ninety Three

Rupees Twenty

control accessories.

Four Paise

Providing laying and jointing in true line and level 75mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every Two Hundred

two metre C/C or shall be concealed as directed including necessary Seventy Seven

fittings etc. including testing of pipe and joints and fixing the same with Rupees Forty Two

adhesive solvent, including cost of all materials. Paise

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

Seventy Two

two metre C/C or shall be concealed as directed including necessary

86 Rmt. 37.50 72.65 Rupees Sixty Four

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

Ninety One

two metre C/C or shall be concealed as directed including necessary

87 Rmt. 41.00 91.84 Rupees Eighty

fittings etc. including testing of pipe and joints and fixing the same with

Three Paise

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every One Hundred

two metre C/C or shall be concealed as directed including necessary Forty Eight

fittings etc. including testing of pipe and joints and fixing the same with Rupees Eleven

adhesive solvent, including cost of all materials. Paise

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every One Hundred

two metre C/C or shall be concealed as directed including necessary Ninety Five

fittings etc. including testing of pipe and joints and fixing the same with Rupees Sixty Six

adhesive solvent, including cost of all materials. Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & Fixing gun metal check or no return full way wheel valve etc.

Four Hundred

complete as per the instruction of EIC. (C) 25 mm. Dia

90 Each 10.00 420.63 Twenty Rupees

Sixty Three Paise

Providing & Fixing gun metal check or no return full way wheel valve etc.

Six Hundred Sixty

complete as per the instruction of EIC. (E) 40 mm. Dia

91 Each 10.00 663.43 Three Rupees

Forty Two Paise

Providing and fixing screw down bib taps of following size.(A) Brass

Two Hundred

screw down bib tap polished bright. (i) 15mm dia.

92 Each 8.00 214.81 Fourteen Rupees

Eighty Paise

Providing and fixing brass screw down stop tap.(B) 20mm dia. Two Hundred

93 Each 7.00 223.81 Twenty Three

Rupees Eighty

Providing erecting and fixing double coated ISI water tank of required

Three Rupees

94 capacity each with all necessary fittings and connection etc. complete on Liter 8000.00 3.95

Ninety Four Paise

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the Seven Hundred

following nominal diameter of self cleansing design with C.I screed down Thirty Three

or hinged grating including the cost of cutting & making good the walls, Rupees Twenty

as per detailed, directed & approved by the EIC. Six Paise

Providing and fixing S.W. gully trap with C.I. grating brick masonry One Thousand

chamber and water tight C.I. cover with frame of 300mm x 300mm size Two Hundred

96 (inside) with standard weight.(i) Square mouth traps. (A) 100mm x Each 8.00 1,292.19 Ninety Two

100mm size P type. Rupees Nineteen

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top Two Thousand

slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate Nine Hundred

97 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Each 6.00 2,932.93 Thirty Two

cement mortar 1:3 finished smooth with a floating coat of neat cement Rupees Ninety

on walls & bed concrete for (i) Inside dimensions 455mmx 610mm & Two Paise

450mm deep for single pipe line. etc. complete as per detailed, directed

& approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand )

finished with a floating coat of neat cement & making channels in

cement 1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate 20mm Nineteen

nominal size ) finished smooth complete including curing & testing… ( I ) Thousand Three

98 inside 900mm x 1200 mm & 1.5 m deep including R.c.c. cover with frame Each 6.00 19,349.63 Hundred Forty

size 560 mm diameter ( A ) with 230mm thick walls of brick masonry Nine Rupees Sixty

using brick having crushing strength not less then 35 kg/sqcm in CM 1 : 5 Three Paise

( 1 cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm

diameter sewer.. etc. complete as per detailed, directed & approved by

the consultant / EIC.

Providing Septic Tank of 10.00 mt x 4.00 mt x2.00 mt size for Sewerage

including excavation with any strata up to four meter depth,PCC in Two Hundred

Bottom Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M200 Slab on Sixty Four

Top And bottom, required filling for Tank including making Required line Thousand Three

for water inlet, precast RCC M.200 Frame & cover etc.as directed by Hundred Five

engineer in charge. etc complete, septic tank as per detailed drawing. Rupees Eighty

Nine Paise

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or Eight Hundred

Thirty Four

100 shall be concealed in wall as directed necessary fittings such as bends, Rmt. 126.00 834.38

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rupees Thirty

cement incl. cost of all material etc. complete as per detailed, directed & Eight Paise

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete

Six Hundred

Light duty non-pressure pipes I.S. class NP2 of the following internal

Seventy Seven

101 diameter with collars and butt ends prepared for collar joints including Rmt. 40.00 677.97

Rupees Ninety

testing of joints complete.(D) 300mm

Seven Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling

Thirty Three

brickbats with dry masonry work, Honeycomb masonary work, M:20

Thousand Eight

RCC. SLab incl. form work including FE-500 Reinforcemnt, M.S.cover, C.I.

102 Each 1.00 33,868.33 Hundred Sixty

Pipe & cowl vent, vatas in C.M. 1:3 with finishing curing etc. complete as

Eight Rupees

directed.. etc. complete as per detailed, directed & approved by the

Thirty Three Paise

consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter

wash basin with single hole for pillar type with Cl or MS brackets painted

white including cutting holes, ranking bolts for Fixing & marking good

the same, including Fixing C.P. Brass waste coupling 32mm dia & Bottal

trap & 15mm dia pillar tap, Bottle Trap, as approved, capstan head C.P.

screwed down high pressure with screw shank & back nuts & rubber Two Thousand Six

Hundred Seventy

103 plugs, 15mm dia brass stop cock (50/75mm p.v.c. Drain connection pipe, Each 5.00 2,672.16

Water Connection Pipe of required Size, & testing the same for leak Two Rupees

proof, etc. with all material & labours to complete this job in all Fifteen Paise

respected manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Providing and fixing wash down water closet (European type,Wall hung

W.C. Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat

and cover for wash down water closer with C.P. brass hinges, C.P. brass Seven Thousand

104 toilet paper holder, Jet Spray, Metropole flush valve Incl. Connection and Each 4.00 7,001.62 One Rupees Sixty

rubber buffers. (A) Vitreous China., etc. complete as per detailed & Two Paise

approved by the consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot

One Thousand

rest (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete to be

Four Hundred

105 measured and paid for separately) (A) Vitreous China.(I) Long pattern = Each 1.00 1,400.16

Rupees Sixteen

White colour

Providing and fixing Urinal or approved quality including conecting the One Thousand

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat Seventy Four

106 back or corner type size 430mm x 260mm x 350mm. Each 3.00 1,074.86

Rupees Eighty Six

Providing & Fixing C.P. brass towel rail Approved Make complete with

C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc.

complete as per detailed, directed & approved by the consultant / EIC. Six Hundred

107 (B) 600mm x 20 mm size, etc. with all material & labours to complete Each 5.00 616.42 Sixteen Rupees

this job in all respected manners, etc. complete as per detailed & Forty Two Paise

approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to

wooden plugs with C.P. brass screws & washers, etc. with all material & Eight Hundred

108 labours to complete this job in all respected manners, etc. complete as Each 5.00 859.41 Fifty Nine Rupees

per detailed & approved by the consultant & directed by EIC. Forty Paise

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush tank,

seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. /

C.I. painted brackets, Waste Coupling, 32mm size bottle trap etc. all

Internal fittings complete with grab rails, swin type grab bar etc. rubber

buffers, C.P nuts, bolts etc making holes in walls & floors, & finishing for Forty Thousand

ready to use. The rate includes all necessary connection charges as per Four Hundred

109 product detail to the satisfaction of Architect / engr. in-charge where Each 1.00 40,425.96 Twenty Five

required & the final handing over etc. complete as per specifications, Rupees Ninety

drawings & as directed by the Engineer-in-charge. The scope includes Five Paise

Providing and fixing all the necessary fittings of approved brand and as

per directed by Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, Three Hundred

shanks & back nuts. (i) 15mm dia. Eight Rupees

Seventy Two

Providing & Fixing brass screw down stop tap. (A) 15mm dia.

Two Hundred

111 Each 6.00 205.83 Five Rupees

Eighty Two Paise

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, Two Thousand

painted white including cutting holes in walls and making good the same Three Hundred

112 but excluding fittings. Each 0.00 2,326.66 Twenty Six -

Rupees Sixty Five

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling

Seven Hundred

113 Piping Work as Per Directed By Engineer In Charge Each 10.00 707.00

Seven Rupees

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe etc.

One Thousand

with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

One Hundred

114 aggregate 20 mm nominal size), including finishing complete so as to Each 20.00 1,161.50

Sixty One Rupees

make it leak proof.

Fifty Paise

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete

with 6A Modular type switch / bell push & accessories and earth Four Hundred

continuity of following type, erected on PVC / Metallic box, single Eighty Five

115 mounting base frame covered with textured/metallic front plate Pt. 53.00 485.81

Rupees Eighty

modules erected on / in wall / ceiling as per pipe erected, with One Paise

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with accessories

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) One Hundred

Sixty Seven

116 / Acrylic sheet for open / concealed wiring. with necessary Lamp holder Pt. 78.00 167.66

/ ceiling rose / H.D.Connector as directed. Rupees Sixty Six

Note:- Maximum up to 6 mtrs length, excess will be considered as Paise

Mains for Secondary Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator

with separately mounted and accessories with earth continuity of Six Hundred

Seventy Four

117 following type erected on PVC / Metallic box, single mounting base Pt. 33.00 674.68

frame covered with textured/metallic front plate modules erected on / Rupees Sixty

in wall / ceiling as per pipe erected. with necessary ceiling rose / Eight Paise

H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front plate modules Five Hundred Ten

118 erected on / in wall / ceiling as per pipe erected with following type of Pt. 40.00 510.05

Rupees Five Paise

accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front plate modules Seven Hundred

119 erected on / in wall / ceiling as per pipe erected with following type of Pt. 4.00 745.38 Forty Five Rupees

accessories. Thirty Eight Paise

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front plate modules Nine Hundred

120 erected on / in wall / ceiling as per pipe erected with following type of Pt. 6.00 915.06 Fifteen Rupees

accessories. Six Paise

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (FRLS) CAT III

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

Two Hundred

textured / metallic front plate modules erected on / in wall / ceiling

Fifty Seven

121 with following type accessories. Pt. 80.00 257.55

Rupees Fifty Five

Single mounting base-frame & Textured / Metallic front plates. Cat-

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling ,complete with 6A

Modular type switches and following type of accessories erected on PVC

/ Metallic box, single mounting base frame covered with textured / Six Hundred

122 metallic front plate modules erected on / in wall / ceiling as per pipe Pt. 6.00 603.98 Three Rupees

erected. with necessary batten/angle holder or ceiling rose or Ninety Eight Paise

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

Twenty Five

metallic front plate , modules erected with necessary connection. As

123 Ea. 20.00 25.25 Rupees Twenty

desired by Engineer In charge

Five Paise

(7) Blank Plate Single Cat-III

Decorative call bell Ting-tong box type 250 volts complete erected Seventy One

124 Ea. 1.00 71.71 Rupees Seventy

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary One Hundred

125 connections as per site situation directed by Engineer In charge. Ea. 11.00 160.59 Sixty Rupees

(8) Computer RJ-45 socket cat - III Fifty Nine Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

Thirty Three

necessary PVC fittings & Junction boxes fixed with adhesive solution &

126 Mtr. 500.00 33.33 Rupees Thirty

Clamps with following dia of pipes, in approved manner as directed b)

Three Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

Sixty Seven

necessary PVC fittings & Junction boxes fixed with adhesive solution &

127 Mtr. 40.00 67.67 Rupees Sixty

Clamps with following dia of pipes, in approved manner as directed d)

Seven Paise

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

Twenty One

of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2)

128 Mtr. 200.00 21.21 Rupees Twenty

(A) Supplying and laying UPVC cable trunking system comprising

Two Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & flame

Seventy Seven

129 proof confirming BS .All necessary accessories and measuring of Mtr. 70.00 277.75

Rupees Seventy

following sizes. (1) 75 mm x 50 mm trunking

Five Paise

(A) Supplying and laying UPVC cable trunking system comprising

One Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & flame

Eighty Eight

130 proof confirming BS .All necessary accessories and measuring of Mtr. 300.00 188.87

Rupees Eighty

following sizes. (3) 50 mm x 50 mm trunking

Seven Paise

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Sixty Two Rupees

131 insulated stranded wire of green colour for earth continuity of following Mtr. 600.00 62.62

Sixty Two Paise

size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

Eighty Two

insulated stranded wire of green colour for earth continuity of following

132 Mtr. 1200.00 82.82 Rupees Eighty

size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded One Hundred

133 wire of green colour for earth continuity of following size (FRLS) (a) Mtr. 250.00 112.11 Twelve Rupees

with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Eleven Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Two Hundred

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Eighty Four

134 necessary clamps or in existing trench / pipe of following size of cables Mtr. 10.00 284.82

Rupees Eighty

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Two Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with

Eighty Seven

135 necessary clamps or in existing trench / pipe at road crossing or floor Mtr. 100.00 287.85

Rupees Eighty

of following size of cable. (B) 3 core 4 Sq. mm

Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall Three Hundred

136 with necessary clamps or in existing trench / pipe at road crossing or Mtr. 40.00 364.61 Sixty Four Rupees

floor of following size of cables. (B) 4 core 4 Sq. mm Sixty One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

Five Hundred Ten

137 with necessary clamps or in existing trench / pipe at road crossing or Mtr. 300.00 510.05

Rupees Five Paise

floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Six Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with

Seventy Six

138 necessary clamps or in existing trench / pipe at road crossing or floor Mtr. 120.00 676.70

Rupees Seventy

of following size of cables. (A) 4 core 10 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as Forty Six Rupees

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Forty Six Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going Thirty Three

140 tails, insulating tape etc for following size of cables. Ea. 8.00 33.33 Rupees Thirty

(A) 2 to 4 core 2.5 / 4 Sq. mm Three Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going Thirty Eight

141 tails, insulating tape etc for following size of cables. Ea. 6.00 38.38 Rupees Thirty

(B) 2 to 4 core 6 Sq. mm Eight Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going Thirty Eight

142 tails, insulating tape etc for following size of cables. Ea. 4.00 38.38 Rupees Thirty

(C) 2 to 4 core 10 Sq. mm Eight Paise

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable Seventy Five

143 complete with out going tails, insulating tape etc for following size of Ea. 2.00 75.75 Rupees Seventy

cables. (B) 3 & 1/2 core 35/50 Sq. mm Five Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Fifteen Rupees

144 connected to switchgear terminals with brass/cadmium plated nut bolts Ea. 2.00 15.15

Fifteen Paise

in an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Twenty Rupees

145 connected to switchgear terminals with brass/cadmium plated nut bolts Ea. 6.00 20.20

Twenty Paise

in an approved manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

Eight Rupees

146 switchgear terminals with brass/cadmium plated nut bolts in an Ea. 160.00 8.08

Eight Paise

approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

Ten Rupees Ten

147 switchgear terminals with brass/cadmium plated nut bolts in an Ea. 8.00 10.10

approved manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying

cable or locating the fault all over the run and backfilling the same and Fifty Five Rupees

making the surface as normal ground. Fifty Five Paise

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of

Sixty Two Rupees

149 cable. below ground / road surface for enclosing cable and back filling Mtr. 160.00 62.62

Sixty Two Paise

the same to make ground as per original. (A)50 mm dia

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of Ninety Five

150 cable. below ground / road surface for enclosing cable and back filling Mtr. 180.00 95.95 Rupees Ninety

the same to make ground as per original. (C)90 mm dia Five Paise

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

Six Thousand One

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

Hundred Seventy

151 suitable to work on A.C. supply 50 c/s. with all internal connections, Ea. 1.00 6,173.12

Three Rupees

spreader tinned copper & complete erected in existing 16 G.M.S.

Twelve Paise

housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity One Hundred

152 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Ea. 93.00 112.11 Twelve Rupees

Mark - Cat III Eleven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

Six Hundred Sixty

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

153 Ea. 4.00 668.62 Eight Rupees

existing box having following capacity (b)40 Amp. Cat.III

Sixty Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

Five Hundred

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

Eighty Seven

154 existing box having following capacity (a) 6 to 32 Amp. Ea. 2.00 587.82

Rupees Eighty

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

Six Hundred Forty

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

155 Ea. 7.00 647.41 Seven Rupees

existing box having following capacity (b)40 Amp.

Forty One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without One Thousand

MCB to house appropriate nos. of MCBs.(The DBs should be used of One Hundred

same company of MCB to be used) suitable for (A) single phase incoming Fifty Two Rupees

and horizontal single phase outgoing (b) sheet steel double door (IP-43) Forty One Paise

(iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Two Thousand

MCB to house appropriate nos. of MCBs.(The DBs should be used of Nine Hundred

157 same company of MCB to be used) suitable for (B) three phase incoming Ea. 4.00 2,913.85

Thirteen Rupees

and single phase horizontal type outgoing Per phase isolation type (PPI) Eighty Five Paise

(b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door (IP54)

fitted with insulated copper busbar, isolated neutral link, earth bar and Eighteen

DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for Thousand Six

158 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing Ea. 1.00 18,663.60 Hundred Sixty

as per following .(The DBs should be used of same company of MCB to Three Rupees

be used) Fifty Nine Paise

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V,50Hz. having One Thousand

characteristic of quick action & tripping with all advance feature & do Nine Hundred

not incorporate any electronic component. for following Max. rating Sixty Nine Rupees

erected as directed (i) 25 Amps.DP Cat. III Fifty Paise

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted Twelve Thousand

inside and outside with hinged doors and locking arrangement Three Hundred

160 consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat- Ea. 1.00 12,399.77 Ninety Nine

III)with analog time switch, auto manual switch of same make and Rupees Seventy

suitable input and output Bakelite terminals and with door earthing Seven Paise

approved by Engineer in charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

Two Thousand

10 KA and suitable for operation on single phase 240 V,50Hz. having

Two Hundred

characteristic of quick action & tripping with all advance feature & do

161 Ea. 6.00 2,235.13 Thirty Five

not incorporate any electronic component. for following Max. rating

Rupees Thirteen

erected as directed (ii) 40Amps. DP Cat. III

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, Two Hundred

CCT 3000 K to 6500K, Ninety Five

162 Luminaire efficacy> 85 lumens/watt ,LED Nos. 10.00 295.93

Rupees Ninety

LED driver efficiency > 85 % Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Two Hundred

163 Luminaire efficacy> 85 lumens/watt , Nos. 11.00 220.18 Twenty Rupees

LED driver efficiency > 85 % Eighteen Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (i) 9 watts,Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Four Hundred

Twenty Seven

164 Luminaire efficacy> 85 lumens/watt , Nos. 29.00 427.23

LED driver efficiency > 85 % Rupees Twenty

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description Three Paise

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (ii) 11 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Seven Hundred

165 Luminaire efficacy> 85 lumens/watt , Nos. 87.00 758.51 Fifty Eight Rupees

LED driver efficiency > 85 % Fifty One Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (iv) 24 watts, Surge-2 KV

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity Two Thousand

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > Two Hundred

166 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Nos. 10.00 2,201.80

One Rupees

description have shown ranges of Wattage capacity of LED fittings.The Eighty Paise

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (iii)

watts Cat-lll

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing and erecting PVC body surface or pendent mounting LED Bulk

type 9 watt Lighting Fitting with electronic driver. And lumen output Seven Hundred

from luminaire 720lm , input voltage range 90-300VAC , 50Hz cool Eighty Seven

white(3000 to 6500k), inbuilt driver, -20degC to +60degC working Rupees Eighty

temperature, AL frame with Beam Angle 120deg Paise

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

mtr. Long duly painted with two coats of aluminium paint complete Three Thousand

with metallic base plate of 300 mm x 300 mm x 4mm thick for using as a Two Hundred

168 compound light pole with approx. weight 32 Kg. Nos. 10.00 3,225.94 Twenty Five

Rupees Ninety

Four Paise

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the

brackets and having spread of 1 mtr. length with suitable rise as per site Five Hundred

169 condition & suitable welded stiffener reducer and nipple with check nut Nos. 10.00 561.56 Sixty One Rupees

complete painted with one coat of Red oxide / PU base primer and two Fifty Six Paise

coats of Aluminium / PU paint. paint with following nos of arms. [A]

Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in / loop Six Hundred

170 out in built terminal suitable for four core cable, waterproof of I.P. 54 Nos. 10.00 616.10 Sixteen Rupees

protected with clamp or bolt nut & earth bolt of following size. (B) Ten Paise

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

Eight Hundred

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high

171 Nos. 10.00 809.01 Nine Rupees and

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make shall be Two Thousand

172 approved by Engineer in charge) including Supplying and erecting 19 / 20 Nos. 33.00 2,056.36 Fifty Six Rupees

mm. nominal bore Medium Class M.S. Pipe down rod erected duly Thirty Six Paise

painted for fan complete with proper insulation without leakage and

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length each side and pierced through a 16 One Hundred

173 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Nos. 33.00 108.07 Eight Rupees

Ceiling with necessary finishing. Seven Paise

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Fan box. Eighteen Rupees

Eighteen Paise

Supplying & erecting approved make low noise decorative exhaust fan

One Thousand

having square frame ABS body with inbuilt lowers & square frame.

Three Hundred

175 250mm with 1350 RPM Cat.II Nos. 9.00 1,366.53

Sixty Six Rupees

Fifty Three Paise

Providing and erecting required size HOT dipped Galvanised iron strip for

Seventy Seven

earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc.

176 Kg. 100.00 77.77 Rupees Seventy

using proper clamp.

Seven Paise

Providing and erecting required size Copper strip for earthing of H.T. Seven Hundred

OCB / ACB/ Transformer, LT panel board, Motors etc. using copper Ninety Four

clamp. Rupees Eighty

Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Seventy Seven

SWG.Using for DB earthing wire 8 to 16 SWG.

178 Kg. 50.00 77.77 Rupees Seventy

Seven Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane Seven Thousand

mentioned in test Certificate) & having back filling compound of (B) Ninety Five

179 Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as Ea. 2.00 7,095.25

Rupees Twenty

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Five Paise

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [B] For Electrical installation up to 11 KV

located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Ten Thousand

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as Five Hundred

180 per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Ea. 2.00 10,593.89 Ninety Three

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound Rupees Eighty

should be capable to retain moisture for long time Necessary test report Nine Paise

must be submitted by Agency. [C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in Forty Seven

181 existing pipe as per direction. [C] CAT - 6 RMT 1190.00 47.47 Rupees Forty

Seven Paise

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base

rectifier & Inverter & sealed maintenance free SMF batteries. The

charger having operating capacity for input 160-270V AC & inverter Eighty Two

having output 230V,50 Hz Ac with 0.8 load power factor with battery, Thousand Nine

182 over/under voltage output with over load & short circuit protection Nos. 1.00 82,941.20 Hundred Forty

equipment. The system housed in CRC sheet duly powder coated paint One Rupees

with following power backup.with MS painted batteries stand, 10% Twenty Paise

Overload capacity for momentary load. (C) 3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚ C within a hour, The water cooler Forty Nine

should be comprising of hermetically sealed compressor, fan motor, Thousand Five

183 condensing unit, water tank surrounded by evaporating coil, Ea. 1.00 49,559.69 Hundred Fifty

thermostats, relay etc. complete with necessary inlet & outlet Nine Rupees Sixty

connection. The body of water cooler will be made from Stainless Steel. ◦ Nine Paise

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

Twenty Nine

presediment filter GAC filter, carbon filter suitable buster DC pump

Thousand One

capacity 80 psi, mention with 40 psi inline type post carbon filter auto

184 Ea. 1.00 29,187.99 Hundred Eighty

low & high pressure switches with following size of storage tank & LPH

Seven Rupees

capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster

Ninety Nine Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing Water proof straight Joint in PVC insulated flat flexible copper

One Hundred

cable by using insulating material, water proofing material, & making the

Eighty Nine

185 joint complete. (A) Up to 10Sq. mm Ea. 10.00 189.88

Rupees Eighty

Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS

MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor

(0.8758 centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × Four Thousand

1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG One Hundred

186 Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, Nos 13.00 4,156.15

Fifty Six Rupees

BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built-in Mic IR Fifteen Paise

Range of 30 Mtr., IP67, PoE complete with rj45 connector crimping, PVC

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image

Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

(2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, Eight Thousand

187 MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, Nos 6.00 8,080.00

Eighty Rupees

AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Support

Built-in Mic IR Range of 50 Mtr., IP67, PoE complete with rj45 connector

crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS

MAKE - 32 Ch. 4K Network Video Recorder AS PER SPECIFICATIONS : Up

to 32 channel IP camera input Max. decoding capability: 8 × 1080p@30

fps, 2 × 8 MP@30 fps Smart Instastream/H.265/H.264 /MJPEG Max. Eighteen

160/128/60 Mbps incoming/recording/outgoing bandwidth Support 2 Thousand One

188 SATA HDDs up to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) Nos 1.00 18,180.00

Hundred Eighty

HDMI / VGA simultaneous video output Support Multi-brand network Rupees

cameras ONVIF Version 2.4 conformance Mobile Software: iCMOB,

gCMOB CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance Thirteen

Harddisk Thousand Three

189 Nos 1.00 13,352.20 Hundred Fifty

Two Rupees

Twenty Paise

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP

PoE power budget is up to 250 W, making it ideal for small to medium

business surveillance systems. Port Priority is able to guarantee the Fifteen Thousand

190 quality of sensitive application like video monitor. PoE Auto Recovery Nos 3.00 15,150.00 One Hundred

automatically reboots your dropped or unresponsive PoE-powered Fifty Rupees

Intelligent power management protects the switch from overload. QoS

ensures smooth traffic for latency sensitive applications. IGMP Snooping

optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5

GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - Three Thousand

TP-Link Archer C50 AC1200 or equivalent Thirty Rupees

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Twenty Three

192 Nos 1.00 23,482.50 Thousand Four

Hundred Eighty

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets, Nine Thousand

Five Hundred

193 mounting trays, exhaust fan complete with accessoreis - 600 X 600MM Nos 1.00 9,595.00

approx. size -- Elirix make Ninety Five

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input Two Thousand

Power:8 Watt RMS Power Taps:8/4/2W on 100 V Freq.Responce:60- Two Hundred

194 15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model Nos 20.00 2,222.00

Twenty Two

no.CS-6081T Rupees

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux., Twenty Two

frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost type, Thousand Seven

195 LED Meter : 5 LED Arrays, The amplifier suitable to operate 240V A.C.& Nos 1.00 22,725.00

Hundred Twenty

24volt D.C. (Battery) with automatic changeover from AC to Battery Five Rupees

operation, duly protected by wrong Battery Polarity connections.

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having

following features & facilities. (a)input Channels :- Each channel has

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum level

for minimum noise (c)BASS, MID & TREBLE ‘ controls Separately for each

input channel (d)ECHO control for each channel (e)PAN control for echo

channel for left or right output (f) AUX Control : To control , level of the

channel in final mix to AUX sound output (g)Channel ON/OFF switch

(h)ECHO Section :- ECHO, reverb & Chorus effect can be added to all

input channel by different setting of Delay, Reverb & Level control

(i)Tape section (j)Aux. send & return For sending Pre-feeder output of

channel for monitoring or adding a special effect unit (k)Mono / Stereo Thirty Eight

output controls (m) Head phone output for monitoring purpose. Thousand Six

196 Technical specification: Nos 2.00 38,632.50 Hundred Thirty

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output Two Rupees Fifty

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K Paise

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency

Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization

Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line

Output Line Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM /

+17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB,

0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh grille

impedance having frequency response 150-20000 Hz with following

Five Thousand

197 specifications (b) With 2 speakers having power handling capacity of Nos 2.00 5,050.00

23W(MAX) & 15 W (RMS), each speaker have impedance of respectively Fifty Rupees

670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust

resistant ceiling/ wall mounted sound speaker with decorative case &

taps / impedance having frequency response 150-20000 Hz with Seven Thousand

Five Hundred

198 following specifications (b) With 2 speakers having power handling Nos 4.00 7,575.00

capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of Seventy Five

respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. Rupees

ohms / 2.5W

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605,

Eleven Thousand

GMB-6C or equivalent in Bosch /Shure etc.

199 Nos 1.00 11,110.00 One Hundred Ten

SPEAKER WIRE Eighty Five

200 Mtr 500.00 85.85 Rupees Eighty

Five Paise

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and Fifty Six Thousand

blower motor with its accessories by means of extra supplied proper Three Hundred

201 insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Each 8.00 56,353.96 Fifty Three

Friendly green gas charging and 15A plug top & Remote Control & MS Rupees Ninety Six

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1 Paise

to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power

Fifty Thousand

connection charges and inspector approval for power(to be paid to

202 Lot 1.00 50,500.00 Five Hundred

concern electrical power supplier company)

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Conventional type Smoke detector having following specifications : Dual

LED’s for 360 visibility. Advanced detection and communication

protocol. Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.

Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to

37.8 C. Relative Humidity : 10% to 90% One Thousand

One Hundred

203 Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up Nos 18.00 1,146.35

Time : 30 Seconds. Forty Six Rupees

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Thirty Five Paise

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

dB/m. Thermal Rating : 57 C(135 F). complete with Junction box RAVEL

make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications : CE

Approved. 16 X 2 Dot Matrix LCD Display. Standby battery backup with

built in charging. Switch Mode Power Supply. Tactile eypad for easy

panel operation. System ON indication. Low Battery visual warning with

audible ton. Fire / Fault status in unambiguous colored LED indication.

programmable relays for fire,supervisory and fault. All zones accept

smoke detectors and any normally open contact device. Any Zone can be

configured as alarm or supervisory. Zone wise isolation and one man

walk test facility. Programmable Aux Outputs. Lamp test & Drill test Nine Thousand

Five Hundred

204 facility. 100 All Events log with RTC. Date / Time / Password Nos 1.00 9,595.00

configuration. Programmable auto silence facility. Zone wise sounder / Ninety Five

contact optional). TCP-IP / GSM facility (optional). 120 / 230VAC + 10% - Rupees

15%, 60 / 50 Hz, 50W Operating Temperature 0 – 49° C / 32 – 120° F.

Storage Temperature 0 – 60° C Relative Humidity 93 ± 2% RH (non-

condensing) at 32 ± 2° C / 90 ± 3° F Charging voltage Charging current

V ± 5% 350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo Nine Hundred

Electric Type Tone Type : Fire Engine Siren Material : ABS Plastic Colour : Forty Nine

Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box : 95 H mm X Rupees Forty

75 L mm X 58 D mm Mounting Type : Surface / Flush Mount complete Paise

with Back Box - RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating

Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow / Red Eight Hundred

Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL make Eight Rupees

Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey Pump

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with One Hundred

M.S.fabricated common base plate, coupling, coupling guard, foundation Nineteen

207 bolts etc. for motor and details pump specificaion follow as per No. 1.00 1,19,041.95 Thousand Forty

specification as mentioned in tender volume.. One Rupees

Ninety Four Paise

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump. suitable

for automatic operation and consisting of following: complete in all Two Hundred

respect as required. With Suitable HP, SQ cage induction motor TEFC Fifty Two

208 type suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 Set 1.00 2,52,399.00 Thousand Three

protection for enclosure, horizontal foot mounted type with class 'F' Hundred Ninety

insulation, conforming to IS: 325. Nine Rupees

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set Five Hundred

complete with 100 ltr diesel Fifty Five

209 SEt 1.00 5,55,002.07 Thousand Two

Rupees Seven

Control Panel for the operation of Jockey pump, Fire pump Electric and Ninety Four

210 Fire pump Diesel with automation SEt 1.00 94,990.50 Thousand Nine

Hundred Ninety

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole single Two Thousand

throw type suitable for 3 phase supply with diaphragm. Aluminum Four Hundred

Enclosure with IP 66 protection follow as per specification as mentioned Rupees Forty Six

in tender volume.. Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges,

Ten Thousand

Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned

212 Nos. 2.00 10,090.94 Ninety Rupees

in tender volume..

Ninety Four Paise

of size: 150mm dia.

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Six Thousand One

Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Hundred Seven

in tender volume.. Rupees Ninety

of size: 100mm dia. Eight Paise

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot

valve conforming to I.S:13095 class PN 16rating with Fittings, Flanges,

Thousand Five

Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned

Hundred Thirty

214 in tender volume.. Nos. 2.00 18,533.30

Three Rupees

of size: 150mm dia.

Twenty Nine

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-

Eleven Thousand

Return Valve class PN 16 rating with fittings, flanges, nutbolts, washers,

215 Nos. 2.00 11,041.19 Forty One Rupees

gaskets etc.of sizes: 150mm dia

Nineteen Paise

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding Two Thousand

etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Three Hundred

216 clamps, hangers etc. with painting of one coat of primer and 2 or more Meter 35.00 2,391.95 Ninety One

coats of synthetic enamel paint of approved make / shade complete as Rupees Ninety

per specification. 150mm dia Four Paise

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding One Thousand

etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Seven Hundred

217 clamps, hangers etc. with painting of one coat of primer and 2 or more Meter 15.00 1,744.20 Forty Four

coats of synthetic enamel paint of approved make / shade complete as Rupees Nineteen

per specification. 100mm dia. Paise

Providing, fixing, testing and commissioning of Under Ground M.S. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: Three Thousand

3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness Two Hundred

218 wrapping and coating and providing all fittings like flanges, tees, elbow, Meter 10.00 3,265.73 Sixty Five Rupees

fasteners with all follow as per specification as mentioned in tender Seventy Three

volume.. 150mm dia Paise

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Three Hundred

Sixty Three

219 welding,threading,jointing. And Excluding cutting holes in wall Mtr 80.00 363.56

/slab and making good of the same. The pipe & fittings shall have One Rupees Fifty Six

coat of primer and two coats of fire red / PO red 25 mm dia. Paise

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Four Hundred

220 welding,threading,jointing. And Excluding cutting holes in wall Mtr 40.00 459.50 Fifty Nine Rupees

/slab and making good of the same. The pipe & fittings shall have One Fifty Paise

coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Five Hundred

Seventy Five

221 welding,threading,jointing. And Excluding cutting holes in wall Mtr 25.00 575.64

/slab and making good of the same. The pipe & fittings shall have One Rupees Sixty Four

coat of primer and two coats of fire red / PO red 40 mm dia. Paise

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Seven Hundred

Ninety Seven

222 welding,threading,jointing. And Excluding cutting holes in wall Mtr 15.00 797.82

/slab and making good of the same. The pipe & fittings shall have One Rupees Eighty

coat of primer and two coats of fire red / PO red 50 mm dia Two Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Nine Hundred

Forty Nine

223 welding,threading,jointing. And Excluding cutting holes in wall Mtr 15.00 949.31

/slab and making good of the same. The pipe & fittings shall have One Rupees Thirty

coat of primer and two coats of fire red / PO red 65 mm dia Paise

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges One Thousand

with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Two Hundred

224 welding,threading,jointing. And Excluding cutting holes in wall Mtr 30.00 1,201.78 One Rupees

/slab and making good of the same. The pipe & fittings shall have One Seventy Seven

coat of primer and two coats of fire red / PO red 80 mm dia. Paise

Providing fixing testing and commissioning of GUN METAL 15 mm size

Three Hundred

quartzoid bulb type sprinklers, set to operate at 57 degree Centigrade.

Ninety Nine

225 Pendent type type with required accessories complete. (GUN METAL) Nos. 85.00 399.96

Rupees Ninety Six

Supplying , installation, Testing & commsioning of Flexible Drop

One Thousand

Five Hundred

Fourteen Rupees

Eighty Four Paise

Providing, fixing, testing and commissioning of RRL Fire delivery hose

mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with Six Thousand Five

Stainless Steel male & female coupling ISI Mark IS :903 duly binned with Hundred Two

copper wire winding follow as per specification as mentioned in tender Rupees Twenty

volume.. Seven Paise

Supply installation ,Testing & commissioning of single headed oblique

pattern ISI hydrant landing valve with 80 mm dia flanged inlet & 63 mm Seven Thousand

dia instantaneous type female outlet complete with PVC cap and chain, Six Hundred Fifty

twist release type lugs WITH all accessories as per SI Standard Rupees Seventy

Conforming to IS-5290. (SS 304- Body SS-304 Coupling) Five Paise

Providing, fixing, testing and commissioning of weatherproof standard

Six Thousand One

fire Hose Cabinet wall mounting type 18 Gauge. (750 x 600 x 250)

Hundred Eighty

having Double Opening with M.S. fabricated stand, necessary lock & key

229 Nos. 2.00 6,189.79 Nine Rupees

arrangement follow as per specification as mentioned in tender volume..

Seventy Eight

Supply installation ,Testing & commissioning of SS Fire Brigade

Seven Thousand

connection consisting of 2WAY. 63 mm instantaneous type male

Six Hundred Fifty

230 coupling with 125 mm Dia. flanged outlet complete for fire water tank. No. 1.00 7,650.75

Rupees Seventy

Five Paise

Supply installation ,Testing & commissioning of SS Fire Brigade Eleven Thousand

connection consisting of 4WAY. 63 mm instantaneous type male Seven Hundred

231 coupling with 125 mm Dia. flanged outlet complete for fire water tank. No. 1.00 11,731.15 Thirty One

Rupees Fifteen

Providing, fixing, testing and commissioning of Wall mounting Fix type Ten Thousand

First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Eight Hundred

232 Type II fitted wit SS Shutt off Nozzle follow as per specification as Nos. 2.00 10,877.20 Seventy Seven

mentioned in tender volume.. Rupees Nineteen

Supply installation , testing & commissioning of ISI Standard SS-304

Four Thousand

branch pipe with nozzle of 20mm nominal bore outlet as per IS:903

One Hundred

suitable to fit with standard instanteneous type 63mm dia coupling (SS-

233 Nos. 2.00 4,182.41 Eighty Two

Rupees Forty One

Supply installation testing & Commissioning of 25 MM dia Air Realese Two Thousand

valve complete in all respects. (GUN METAL) Two Hundred

234 Nos. 2.00 2,294.72 Ninety Four

Rupees Seventy

Supply installation testing & Commissioning of Pressure guage 4" dial 0 Two Thousand

to 16 kg/cm2 with syphon and cock complete in all respects (SS-304). Three Hundred

Ninety Seven

Rupees Twenty

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS-

Nine Hundred

304) complete with SS Ball with single handed lever complete in all

236 Nos. 2.00 969.10 Sixty Nine Rupees

Nine Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher

Kgs. capacity bearing ISI Mark for Fighting ABC Class of Fire. The Two Thousand

Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 Three Hundred

237 bearing ISI. Mark follow as per specification as mentioned in tender Nos. 5.00 2,355.72 Fifty Five Rupees

volume.. Seventy Two

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made

from the brand new seamless cylinder, as per IS: 7285 and CCE approval, Five Thousand

fitted with a Discharge hose and horn and wheel type valve with initial Four Hundred

Charge as per IS: 15683:2006 specification, bearing ISI Mark follow as Fifty Six Rupees

per specification as mentioned in tender volume.. Sixty Two Paise

Providing & fixing Modular type ABC Dry Powder Fire extinguishers

Four Thousand

litre capacity Fire Extinguishers. The Extinguisher will be Manufactured

Four Hundred

Strictly as per BIS: 15683:2006 bearing ISI. Mark follow as per

239 Nos. 5.00 4,447.03 Forty Seven

specification as mentioned in tender volume..

Rupees Three

Providing, fixing, testing and commissioning of On -Off Switch follow as

Four Hundred

per specification as mentioned in tender volume..

240 Nos. 3.00 408.65 Eight Rupees

Sixty Four Paise

Providing, fixing, testing and commissioning of below Auto Glow Two Hundred

Signages follow as per specification as mentioned in tender volume.. Thirty Three

Emergency Exit 4” X 12” Rupees Sixteen

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority with Thirty Thousand

242 all other charges and documentations for getting No Objection Job. 1.00 30,300.00 Three Hundred

Certificate.(as per GMB Approved rate) Rupees

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum framing

of gauge 16. Aluminum framing size for vertical & horizontal support is

50 mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm. All

exposed surfaces finished with 1 mm thick Laminate of approved shade

complete with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with

open able stud from partition Including all materials and labor etc. Make

necessary grooves as per shown in drawing. Using of 12 mm thick clear Six Thousand Six

Hundred Twenty

243 glass with proper crystal edges & with suggested frosted films on glass. Sqm 4.00 6,620.55

All joints are covered with teakwood beading Patti finished with polish Rupees Fifty Five

matching with laminate. Including door of same design if required Paise

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.) for

Electrical works & no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum) One Thousand Six

Hundred Seventy

244 sheet, 1200mm centre to centre, and centre to centre to form agrid of Sqm 66.00 1,674.15

1200X600mm and secondary thick (Minimum) sheet to be interlocked at Four Rupees

middle of the 1200X600mm panel to form grid of size 600X600mm Fourteen Paise

resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 230mm interval and laying 15mm thick Densified

edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Providing & fixing work station / table having ht of 750 mm Top, with

MS Pipe Structure of Frame as per Architect/ Engineer Design or

also made up of 19mm Thick. Top of Table is 19mm thk ply with

laminate Finish Per Requirement and All internal & external Joints

finished with teakwood beading Patti. Common or front Part of Table is Twenty Four

Sectationized with MS Perforated Sheet. All exposed and internal Thousand Eight

245 surfaces covered with Laminate Finish of approved shade & Complete as Sqm 42.00 24,870.53 Hundred Seventy

per detail drawings & as instructed by Architect/consultant/ Engineer In Rupees Fifty

charge. Complete with all necessary hardware like nails, ss screws, table Three Paise

chain, Key board trey, TDS channel, adhesives etc. Contractor has to

provide all necessary cut outs for Electrical works & no extra payment

shall be made for it.

Providing & fixing office table / staff table having ht of 750 mm Top,

with 19mm thk plywood or MS pipe Structure as per Architect/ Engineer

19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

beading Patti. Item includes fixing of drawers and keyboard tray and

storage with shutters under table as per drawing. With grooves shown Twenty Nine

as per drawing. All exposed and internal surfaces covered with Laminate Thousand Three

246 Finish of approved shade & Complete as per detail drawings & as Sqm 8.00 29,350.96 Hundred Fifty

instructed by Architect/consultant/ Engineer In charge. Complete with Rupees Ninety

all necessary hardware like nails, ss screws, table chain, TDS channel, Five Paise

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply should

follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open

Front Side for Selves with using 12 mm thick Marin ply for framing. All

complete with proper teakwood beading and Teakwood molding as per Ten Thousand

design. Back ply is 12 mm Marin ply. All exposed are covered with 1 mm Three Hundred

247 thick Laminate & internal surfaces are covered with 1 mm thick Sqm 60.00 10,381.62 Eighty One

laminate. External & internal joints covered with beading Patti complete Rupees Sixty One

with polish finish. With grooves shown as per drawing. All complete with Paise

proper hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

304 etc. All Details as per shown in detail drawings & as per instructions

of architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading. and Teakwood molding as per design. Thirteen

Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Thousand Eight

248 Laminate & internal surfaces are covered with 1 mm thick laminate. Sqm 41.00 13,815.77 Hundred Fifteen

External & internal joints covered with beading Patti complete with Rupees Seventy

Polish finish. With grooves shown as per drawing All complete with Six Paise

proper hardware like locks, S.S. Screws, MS Nails, Magnets, table chains,

cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All

Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Notice Board / Pin Board Seven Thousand

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Two Hundred

249 Arrangement complete as per drawing and Directed by Engineer In Nos 4.00 7,259.38 Fifty Nine Rupees

Charge etc complete. Thirty Seven

Providing and fixing News paper stand size 650 x 820 x 1200 or required

height made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk

inner laminate for top including back panel with shelves for magazine Thirteen

and news paper as shown in drawing, all expose joints finish with Thousand Forty

teakwood beadsing patti with polish finish and provision of openable Four Rupees Sixty

top for news paper storage complete as per detailed drawings and One Paise

Engineer-In Charge and Architect

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying and providing reading chairs with PP arms with soft PU pads,

Seat and back upholstered with cushioned and MS powder coated frame

and cantilever legs. Overall dimension 590 L x 600 W x 915 H (Or as

Six Thousand

251 specified) complete as directed by architect and product as per given Nos 91.00 6,060.00

Sixty Rupees

specification. Complete as per architectural design and concept and

approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest Ten Thousand

Seven Hundred

252 -Knee tilt mechanism Nos 1.00 10,738.07

-360 swivel motion/ 100mm stroke gas Thirty Eight

-Nylon Star base Rupees Six Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism Five Thousand

Twenty Four

253 -100mm class 4 gas lift Nos 8.00 5,024.65

-PP Fixed Arm rest Rupees Sixty Four

-Nylon Star base/Twin wheel nylons casters Paise

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with Five Hundred

paddle. Capacity-10 to 15 Ltr. Fifty Seven

Rupees Fifty Two

Supplying and providing dust bin made of 100% virgin plastic with One Thousand

255 paddle. Capacity-120 L Nos 3.00 1,568.03 Five Hundred

Sixty Eight

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch

with speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and

warranty etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed drawing and

instruction of Architect/EIC. Soltis-99-Color-Alu fabric: 39%

Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,

Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N- One Thousand

N): 2%-4%, Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - Nine Hundred

256 0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing Sqm 115.00 1,962.94 Sixty Two Rupees

Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Ninety Three

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All Paise

complete as per approval of designer & instruction of Project Manager.

(The mode of Measurement: The size of the blind will be measured from

end to end bracket (Left to Right bracket) & height will be measured

from top of the pelmet till the bottom of the bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with One Hundred

proportionately base dimenstion as per approved design by client and Fifty Thousand

257 complete as per instruction of engineer-in charge and consultant. Nos 1.00 1,50,995.00 Nine Hundred

Ninety Five

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden Two Thousand

frame of size 2in x 1in consisting 6mm thick ply in back with digital vinyl Four Hundred

258 printing and 5mm thick glass on top if required. Nos 30.00 2,497.23 Ninety Seven

Rupees Twenty

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x One Hundred

2160 pixels with HDR TypeHDR 10+ complete as per approved make and Two Thousand

Rupees Fifty

Seven Paise

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb Fifty Nine

RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 Thousand Seven

260 STUDENT, Full HD display of 21 to 23.8' with keyboard and mouse. Nos 8.00 59,748.35 Hundred Forty

Eight Rupees

Thirty Four Paise

Providing and fixing Automatic Duplex laser printer with 30 pages per

Fifteen Thousand

minute print speed, 8 mb memory, Large 250 sheet paper tray with USB

One Hundred

connectivity.

261 Nos 1.00 15,157.58 Fifty Seven

Rupees Fifty

Seven Paise

Qty. May Tender Rate

Description of Item Unit More Or Total Amount

Description of Item Unit More Or Total Amount

No. Rate In FIghure Rate In Words

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan Fifty Eight

/ Duplex DADF /Single Thousand

Tray Seventy Five

Providing and fixing Directional and Informative Signages- SS Plate, Ninety Two

Grade 304, Brush finish, 2mm Thickness with smoothen corner edges, Thousand Four

263 Acid etching with duco color, SS studs 1.5' away from wall.fitting as per Sqm 1.50 92,433.18 Hundred Thirty

dirction of Architect and EIC Three Rupees

Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick Fifty Two

Thousand Five

264 letter 1.5" depth 10" Height with Duco color & fitting as per direction of Nos 1.00 52,520.00

Architect & EIC. Hundred Twenty

Total Amount

Total Amount

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & Words) of the estimated rates mentoined above . Amount of

my/our tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Rs……………………………………………… Add……………………..……..% above Rs…………………..………………………

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

4 S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal