Construction of building at Govt. Polytechnical college at Talwar in Tehsil Jaisinghpur Distt. Kangra (HP)

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed material to be neatly dressed and leveled as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm layer when required into plinths, sides of foundations etcetera. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings,bases of columns and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts , square rectangular or polygonal in plan as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders, lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (one cement is to six sand is to twelve graded stone aggregate 40mm (forty millimeter) nominal size) and curing complete excluding cost of form work in foundation and plinth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement is to five sand is to ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor ,roofs , landings , shelves and their supports balconies, beams ,girders , bressumers and cantilevers up to all floor level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns ,pillars, post, struts and the like and mass concrete up to all floor level, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum Compressive strength of 20N /mm2 (Twenty Newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair cases) including landings etcetera up to floor all levels as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20 N/ mm2 (Twenty Newton per square millimeter) with cement contents not less than of 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete for reinforced concrete work in Chhajjas not exceeding 10cm (ten centimeters) thickness upto floor all levels including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floors level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete M-20 ( M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimeter) with cement contents not less then 320 Kg (three hundred twenty kilogram) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( any thickness but not less than 0.10m (zero point ten) Metre thickness) including attached pilasters, buttresses, plinth and string courses etcetera from top of foundation up to floor all levels as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Damp Proof Course with 100mm (one hundred millimeter) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeter nominal size) and curing complete, as required at site as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred)/VG-10 using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA TISCO/SAIL for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Random rubble masonry /polygonal rubble masonry (un-coursed/ brought to courses) with hand stone of approved quality in foundation and plinth in cement mortar 1:6 (one cement : six sand ) including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded crushed stone aggregate) 20mm nominal size and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in superstructure above plinth level to floor all levels in cement mortar 1:6 (one cement is to six sand) as per specifications,approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Half brick masonry using second class common brunt clay building bricks in super structure above plinth level to floor all levels in cement mortar 1:3 (one cement is to three sand) with hoop iron such as two Nos 6/8 mm dia bars in Z shape crossing each other shall be provided at the interval of 90-100 cm horizontally as well as vertically to strength the masonry work complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm thick second class Deodar wood paneled glazed or paneled and glazed shutters for door, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm thick second class Deodar wood glazed shutters for door, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using stainless steel wire gauge of IS gauge designation 85G with wire of dia 0.5 mm (Zero decimal five millimetre) and 1:4 aperture on both side for doors, windows and clear story windows including bright finished black enameled iron hings with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick both side prelaminated MDF board (exterior grade) of Greenlum or equivalent S.D.B. shutter with aluminium sheet lining on inner side of shutters and all cut portions of shutter shall have 6mm (six millimetre) thick haard wood edging and 0.63mm (zero decimal six three millimetre) thick aluminium sheet lining on inner side of the shutter including fixing with nickel plated piano hinges with screws etcetera complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick commercial board water proof of kitply / greenply/Dura ply/centuary ply,Marino (ISI marked) for cup board shutters, shelves. Back side of cup board shall have 8 mm (eight millimetre) thick water proof ply. All the exposed portion of cup board shall have 6 mm (six millimetre) thick hard wood edging. The shutter from outer side shall be finished with 1mm (one millimetre) thick lamination of Centuary / Green ply/ Action Tesa of approved shade including hinges, handle,knob complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals (outer face to be measured for payment only). The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing magnetic catcher in cup board shutters with necessary screws etcetera complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimeter) special quality bright finished brass cup-board locks or ward robe lock, with six levers including necessary screws etcetera complete (Indian make of approved quality) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 6mm thick plain asbestos cement sheet ceiling of approved quality with butt jointing and steel screws (frame work and cover fillets to be measured and paid for separately). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) dia stainless steel curtain rod with brackets, plugs etcetera complete as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium oxidised Hydraulic door closer with necessary screws etcetera complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimeter) and 8 x 8 mm ( eight into eight millimeter) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications ,approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm thick factory made PVC panneled door shutters consisting of frame made out of (Mild Steel) tube of 19 gauge thickness of size 19mmx19mm for style and 15mmx15mm (Mild Steel) square tube for top, bottom & Lock rail (Mild Steel) frame shall have a coat of steel primer and covered with 5mm thick PVC solid sheet heat moulded "C" channel of size 30mm thickness, 70mm width out of which 50 (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappered in 45 degree (Forty five degree) angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre ) wide, out of which 75mm (sventy five millimetre) shall be flat and 20mm (Twenty millimetre) PVC sheet should be tapered in 45 degree (Forty five degree) on the inner side to frame, top and bottom rail and 115 mm (one hundered fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to frame lock rail, top and bottom and lock rail shall be provided either side of the pannel 10mm (Ten millimetre) thick,20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail panneling of 5mm (Five millimetre) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the style of rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x51x1.90mm (One hundred into fifty one into one point nine zero millimetre) size with necessary screws etcetera complete as per specification, approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any colour of size 50x47mm with a wall thickness of 5mm made out of extruded 5 mm rigid PVC foam sheet heat bend and mitred at corners as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts, nuts and screws etcetra complete 300 X 16 mm (three hundred into sixteen millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts, nuts and screws etcetra complete 250 X 16 mm (two hundred fifty into sixteen millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 300 X 10 mm (three hundred into ten millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundred fifty into ten millimeter ) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete 150x10 mm (one hundred fifty into ten millimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete 125x10 mm (one hundred twenty five into ten millimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 150mm ( one hundered fifty millimetre) oxidized M.S. single acting spring hinges with necessary screws etcetera complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing oxidized 250mm (two hundred fifty millimetre) size Aluminium hooks and eyes complete in all respectcomplete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 25mm (Twenty millimetre) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetre)(Mirror polished) on 20mm (twenty millimetre average thikness base of cement mortar 1:4(One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

50mm (fifty millimeter) thick cement concrete flooring with metaelic concrete hardner toping under layer of 35mm (thirty five millimeter) thick cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm (twenty millimeter) nominal size) and top layer of 15mm (fifteen millimeter) thick metaelic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone ) aggregate 6mm (six millimeter) nominal size by volume with metaelic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement : 1 part of metaelic floor hardening compound of approved quality by weight) complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing Double charged vetrified tiles (600x600mmx10mm) of Nitco/ Kajaria/orient/Bell/johnson/ Somany/Rak of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications ,approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 4 mm (four millimetre) thick Frosted glass panes with putty and nails complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying ceremic tiles antiskid non slippery of Kajaria/Nitco/Orient Bell/somany/ AGL/Rak/Johnson in flooring (300*300) mm (Three hunred into three hundred millimeter) size with 12mm thick cement mortar 1:3 finished with flush pointing in white cement slurry mixed with pigment to match the shade of tile including rubbing/nosing/moulding and polishing complete as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government..

Providing and laying Kota stone slab 25 mm thick mirror polished in risers of steps, treads , skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:4 (1 cement :4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm thick Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying vetrified tiles of Kajaria/Nitco/Orient Bell/somany/ AGL in flooring 600x600(six hundred into six hundred millimeter) size laid in skirting, risers of steps and dado & pillar laid on 12mm thick cement mortar 1:3 finished with flush pointing in white cement slurry mixed with pigment to match the shade of tile including rubbing/nosing/moulding and polishing complete as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government..

Providing and fixing staircase railing having wodden hand rail 75x65mm and balusters of 19x19mm and 12x12mm in combination of M.S. solid square bars with clear height of 85cm at 60cm c/c jointing in cement concrete steps. The vertical balusters to be welded / jointed with M.S. flat of size 40x6mm below wooden handrail and applying a coat of red lead paint complete as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 50 mm dia (fifty millimeter) M.S. hollow pipe balcony railing upto 90 cm in height or as per architect drawing, design welded with 25mm dia M.S. hollow pipe baluster embedded in cement concrete 30cm c/c and jointed with electrical gas welding at top alongwith M.S. hollow pipe and 2 Nos. M.S. Flat of 50x5mm as per approved drawing , design or as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

White glazed tiles 6mm (Six millimetre) thick in skirting of IS quality 30x20cm (Thirty into Twenty centimetre) of NITCO/Somany/Johnson/Orient/Bell tiles or its equivalent in skirting, risers of steps and dado laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry above plinth level to all floor level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 25mm (twenty five millimetre) granite stone (working top) in kitchen/Pantry with semi round nosing in laid on 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of Granite including rubbing, moulding,nosing and mirror polishing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing prepainted steel sheet roofing of Tata Dura shine/Reliance/ Jindal/ Steel 0.60 mm thickness (ISI marked Z-120) prepainted steel sheet wise hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty ) micron over 5 (Five) micron and back coating of polyster 5 (five) micron over 5 (five) micron primer coating including fixing with prepainted iron J or L hooks, bolts , nuts 6 mm (six millimeter) dia with prepained limpat and rubber washers complete with all accessories required. The material supplied will be accomplanied with test certificate and 20 (twenty) years warranty from the company against corrosion, fading of colour and manufacture defects and further as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetre) over all of Tata Dura shine/Reliance/Jindal/ Steel with 0.60mm (Zero decimal Six zero millimeter) thick pre-painted steel sheet with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts with EDPM seal. The meterial supplied will be accompanied by test certificate & 20 years warrenty from company against the corrosion fading of colour & manufacture defects and further as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetre) over all with 0.60mm (Zero decimal Six zero millimeter) thick pre-painted steel sheet of Tata Dura shine/Reliance/Jindal (steel) shall be having proper Gola / shape with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimeter) diameter with pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 300mm. (Three hundred millimeter) wide 300mm. (Three hundred millimeter) deep plain G.I. Sheet gutter of Tata/Sail fixed with bolts nuts and washers etcetra having dome shape grating and making necessary connections with rain water pipe complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. ( Mild Steel) B.P. (Black plain) sheet of Tata/Sail 2mm (two millimeter) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and paid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 150mm (one Hundred fifty milimetre) diameter on wall face P.V.C. (D-plast) rain water pipes 3.7 mm ( Three decimal Seven millimeter) thick of supreme/Finolex/Prince having working pressure not less than 4.50 kg /cm2 (Four decimal five zero kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) acessories of Supreme/Finolex/Prince for rain water pipes including filling the joints with approved adhesive complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

150mm (One hundred fifty millimetre) diametere PVC Plain bend

150mm (One hundred fifty millimetre) diametere PVC shoe

Providing and fixing 150mm (one hundred fifty millimeter) diametre PVC clamps of approved design to PVC pipes embedded in cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size or fixing with steel screws etcetera complete including cost of cutting holes and making good the wall etcetera as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door frames (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five millimetre) and M.S flat 50x4mm ( Fifty into four millimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door frame (double rebate) manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimetre) and M.S flat 50x4mm ( Fifty into four millimetre) of Tata / Sail in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Steel work of Tata/Sail welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings. complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Steel work of Tata/Sail welded in built up sections trusses and framed work including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint in beams ,joists, channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters, sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing steel primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) withNerolac/Berger/Asian Paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint of approved shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying priming coat of Nerolac/Berger/Asian Paint/Shalimar paint over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters with sand papering and knotting as required with ready mixed paint brushing wood pink primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Painting two or more coats(excluding priming coat) with Nerolac/Berger/Asian Paint on new wood and wood based surface with ready mixed enamel paint of approved shade brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matters, sand papering and Knotting complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

6mm (Six millimeter) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with acrylic/ synthetic /washable distemper of Asian/Nerolac of approved shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved shade (Asian paint/ Nerolac paint) on undecorated wall surfaces (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etcetera including sand papering smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimeter) thick interlocking paver block of NTC and 23 cm dia half round RCC (Reinforced cement concrete) pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8(one cement is to four sand is to eight graded stone aggregate 20mm(twenty millimeter) nominal size) for bedding and haunching of pipe as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for exterior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:5 (one cement : five sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying Birla white / J.K. wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(One cement: five sand: ten graded crushed stone aggregate 40mm (Forty millimeter) nominal; size of bedding for 150 mm (one hundred fifty millimeter) diameter P.V.C. pipe including necessary form work and curing complete, as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying to level or slopes PVC pipe for sewerage line of diametre 150 mm overall 8 mm thick of supreme/Finolex/Prince and jointing with approved adhesive complete .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 20mm nominal dia to wall ceiling and floor galvanised mild steel tube ( medium grade ) including all tube fittings such as nipples, elbow, unions, tees and clamp and making good the walls, ceiling and floor as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 1.00 HP (one Horse power) Tullu pump of krloskar/cromption including board and fittings complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polythene aluminum polythene (P.E. A.L P.E) composite pressure pipe U.V. stabilized with carbon black conforming to I.S. 15450-2004 of Flow guard/ Kitec for water supply including clamps at one metre spacing, cutting, fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work) pipes exposed on wall including filling the joints with approved adhesive complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

1620 (20 mm O.D.) pipe

2025 (25 mm O.D.) pipe

Providing and laying 20mm nominal bore in trenches, galvanised mild steel tubes (medium grade) tube fitings (Earth work in trenches to be measured and paid for separately) as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing PVC water Storage tank of (Sintex/ supreme / finolex ) tripple layer 1000 litres net capacity ISI marked with G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto any height above ground level and carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Making connection of glavanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipe complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes of P.V.C. of supreme/finolex/Prince/ (D-plast) of working pressure not less than 4.50 kgs (Four decimal five zero kilograms) per square centimetre including fixing with approved adhesive etcetera complete as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

110mm (One hundred ten millimetre) diameter

75mm (Seventy five millimetre) diameter

Providing and fixing PVC clamps of supreme / finolex for PVC pipes fitting with steel screws and rawls plugs etcetra complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore

75mm (Seventy five millimetre) nominal bore

Providing and fixing P.V.C accessories of Supreme/ prince/ Finolex for Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bend including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore

75mm (Seventy five millimetre) nominal bore

Providing and fixing PVC Tee of supreme / finolex/prince or its equivalent tees confirming to IS: NO. 14735-99, ISI marked including fixing with approved adhesive etcetra complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore

75mm (Seventy five millimetre) nominal bore

Providing and fixing PVC double equal branch with oval access door, of Supreme/ Finolex/ Prince and insertion rubber washer 3mm (three millimetre) thick with bolts, nuts and ISI marked including fixing with approved adhesive etcetera complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110 mm (one hundred ten millimetre) nominal bore/diametre

75 mm (seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. collar of Supreme/prince/ Finolex including fixing with approved adhesive etcetera.complete The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110mm (One hundred ten millimetre) bore/diameter

75 mm (seventy five millimetre) bore/diameter

Providing and fixing PVC heal rest of Supreme/ prince/ Finolex including filling the joints with approved adhesive mixure complete .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. .

110mm (One hundred ten millimetre) bore/diameter

75 mm (seventy five millimetre) bore/diameter

Providing and fixing P.V.C. cowl of Supreme/ prince/ Finolex including fixing with approved adhesive etcetra complete . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110mm (One hundred ten millimetre) bore/diameter

75 mm (seventy five millimetre) bore/diameter

Providing and fixing PVC plain "Y" junction including fixing with approved adhesive etcetera complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

110 mm (one hundred ten millimetre) diametre

75 mm (seventy five millimetre) diametre

Providing and fixing 110 x 75 mm (One hundred ten into seventy five millimeter) nominal size/diameter P.V.C. floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan No. 20012 of size and fixed with jet pressur of Hindware/Cera/Jaguar/Jal/ESS ESS of white shade) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and Jet pressure over to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing plastic seat (Solid / Hollow type) and cover of Hindware/Cera/Jaguar of white shade for wash down water closet with C.P. Brass hinges and rubber buffers complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Jal of white shade 10.00 litres capacity low level PVC dual flush flushing cistern of Jal/cera/Hindware/ESSESS/Jaquar/ Pryag with a pair of C.I or mild steel brackets, complete with fittings such as lead valve , syphon 15mm nominal size bras s, ball valve, with polythene float, C,P brass handle, unions and couplings for connections with inlet, outlet and over flow pipes 40mm dia C.P flush pipe including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Cera / Hindware/jaguar/Jal/ESS ESS for wash basin complete having recessed at the back for the receiption of pipe and fittings. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing G.I intel connection for flush pipe with W.C Pan as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI mark No 10008 of CERA/ Hindware/Jaquar/Jal/ESS ESS flat back 550x400mm (Five hundred fifty into four hundred millimetre) vitreous china wash basin of Jal/ESS ESS white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of Diamond / Unik/ Prayag big size having size 161.4x54cm (one hundred sixty one point four into fifty four centimetre) of AMC / UNIK/ Diamond of ISI marked with drain board, C.P. waste and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm nominal size diameter rubber plug for wash basin (Heavy duty ). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameter M.I. union for wash basin or sink of Jal/Jaquar/ESSESS including necessary fittings. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameter P.V.C. waste pipe of Supreme/finolex/prince for wash basin or sink including brass check nut. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameter C.P. Bottle Trap for wash basin and sink of Hindware/Cera/Jaquar/Jal . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diametre C.P. Grating of of Hindware/Cera/Jaquar/Jal / (Heavy duty makes ISI marked ) for gully floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing flat back 600x450mm beveled edge mirror of superior glass of Atul/Modi Gaurd/ Silver finish glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers etcetera complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P.(chromium plated) brass towel rail having size 600x20 mm of Hindware/Cera/ Jaquar/Jal of approved quality complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetera complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120mm glass shelf (Heavy duty makes ISI marked IS No. 8931 & 8934) of Hindware/Cera/ Jaquar/Jal or ESS-ESS with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws etcetera complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing two hole basin mixing Faucet of Jal/ Jaquar/ ESS ESS as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of Hindware/Cera/Jal/ Jaquar/ ESS ESS with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm dia C.P. Brass shower rose of Jal/ Jaquar/ ESS ESS with 15mm or 20mm inlet complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore fancy bib tap chromium plated ISI marked IS No. 8934 of Hindware/Cera/Jal/ Jaquar/ ESS ESS with necessary fittings including entire carriage of material with in all leads, lifts .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Hindware/Cera/Jal/ Jaquar/ ESS ESS with fitting complete in all respect .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass stop cock ISI Marked IS No. 8934 of Hindware/Cera/Jal/ Jaquar/ ESS ESS as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore PVC connection pipe with brass union 45cm length, with necessary fittings. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore brass full way valve with wheel of Hindware/Cera/Jal/ Jaquar/ ESS ESS with necessary fitting including entire carriage of material with in all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter C.P. brass angle valve of Hindware/Cera/Jal/ Jaquar/ ESS ESS with nuts as per approved specifications drawing ,design and as directed by the Engineer-Incharge

Providing and fixing 15mm nominal bore brass valve (Horizontal plunger type) of Jal/Jaquar/high pressure with copper plate and necessary fitting including entire carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying to level or slopes PVC pipe for sewerage line of diametre 150 mm overall 8 mm thick of supreme/Finolex/Prince having working pressure not less than 6.0 kg/cm square and jointing with approved adhesive complete .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink of Jal/ Jaquar/ ESS ESS with casted swinging spout at top as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. Brass Toilet paper holder of Hindware/Cera/Jal/ Jaquar/ ESS ESS (Heavy duty make ISI marked including fitting complete in all respect The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated jet pressure of Hindware/Cera/Jal/ Jaquar/ ESS ESS with 1.50 mtr. tube complete in all respect. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore fancy bib tap of Hindware/Cera/Jal/ Jaquar/ ESS ESS ISI marked of approved quality and colour of pryag polyrods with necessary fittings including entire carriage of material with in all leads, lifts and other incidentals complete in all respect. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for PVC pipes of the 150mm internal diameter, including necessary form work and curing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6(1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) in haunching of PVC 150mm internal diameter pipes including necessary form work and curing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre) nominal size inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) and 500mm (Five hundred millimetre) deep, including C.I. (Cast iron) cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions. Total weight of cover and frame to be not less than 38 Kg (Thirty eight kilogram) weight of cover 23Kg (Twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 200mm (Two hundred millimetre) thick walls of brick maronry using common burnt clay building brick in cement mortar 1:3 (one cement: three sand) as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Construction of manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre) nominal size inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) and1000 mm (one thousand millimetre) deep, including C.I. (Cast iron) cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions. Total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred millimetre) thick walls of brick maronry using common burnt clay building brick in cement mortar 1:3 (one cement: three sand) as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Constructing of brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand having C.I. cover with frame (light duty) 355x610mm (Three hundred fifty five into six hundred ten millimeter) internal dimensions. Total weight of cover and frame to be 38 kg (thirty eight kilogram) weight of cover 23kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram). RCC top slab with 1:2:4 ( one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded crushed /broken stone aggregate 40mm (forty millimeter) nominal size inside plastering 15mm (Fifteen millimeter) thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement on walls and bed concrete etcetera complete Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millimeter) and 450mm (Four hundred fifty millimeter) deep single pipe line complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5 (one cement : five sand) and water tight C.I. cover with frame of 300mmx 300mm (Three hundred milimetre into three hundred milimetre) size (inside). The weight of cover to be not less than 4.53 kg (Four decimal five three killograms) and frame to be not less than 2.72 kg (two decimal seven two kilogram), square Mouth traps 150mmx100mm ( One hundred fifty millimetre into One hundred millimetre) size P or R type, as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing PVC collars of Supreme/ prince/ Finolex ISI marked including fixing with approved adhesive etcetera complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Suraj Parkash Aggarwal