SPECIAL REPAIR TO BLDG NO. P-29, P-35 P-89 OF 781 SU AND SPECIAL REPAIR TO BCR STANDBY BCR AT AF STATION BAREILLY

Amount

Taking down of cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per SSR specifications etc complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per SSR specification etc complete all as specified and as directed.

S&F for mild steel, plain, black sheet 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts, urinal troughs and funnels, etc cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed including cutting and removing existing corroded MS sheet.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in natural ground, any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavation of post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B2 (using 40mm graded stone aggregates) as in bed block etc complete all as specified and as directed.

S&F MS round bars 10mm dia and over, cut to length, bent to shape and binding with MS wire as in running bars for chain link fencing.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only GI chain link fence of mesh size 50mm x 50mm and dia of wire 3mm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 15mm thick screed bed with CM (1:6) complete all as specified and as directed.

S&F Galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified.

M&L for mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

Taking down of shutters of any description area exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

M&L for chequered cement concrete tiles (grey cement and pigment) of size (30cm x 30cm) x 25mm thick, set, jointed and pointed in neat cement slurry in floors with and including 15mm thick screed bed with CM (1:6) complete all as specified and as directed.

M&L for 100 mm thick (compacted thickness) PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for 100 mm thick (compacted thickness) PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in sub base for flooring complete all as specified and as directed.

M&L for applying SmartCare Damp Proof Ultra fibre reinforced elastomeric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sq.ft inclusive of all three coats as per following application process: - (a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles. (b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instructions. (c) Applying self priming coat of SmartCare Damp Proof Ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d) Applying 2 perpendicular coats of SmartCare Damp Proof Ultra without any dilution to achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORIZED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UP TO ENGINEER-IN-CHARGE LEVEL. MAKE- ASIAN PAINTS or equivalent in STP LTD./ Fosroc

Demolition and breaking up drain or rain water pipes (PVC, salt glazed ware, AC or reinforced concrete) of 100mm internal dia set in cement mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 40mm thick type B1 (1:2:4) using 20mm graded aggregate as in hard standing/ flooring complete finishing even and smooth without using extra cement all as specified.

M&L for coloured glazed ceramic tiles of size (450 x 300)mm x 7mm thick as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 10mm thick rendering with cement mortar (1:3) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc. 1.5 sq. m each complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.

S&F aluminium handles, cast type, anodized 125mm long complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21 all as specified.

S&F 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F aluminium anodized, skeleton tower bolts 200mm long with plate, staples and bolt of extruded section and fixed complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore any radius including necessary cutting in brick wall and making good complete all as specified and as directed.

M&L for preparation of old treated surfaces of wall and applying one coat of oil bound distemper, white or tinted complete all as specified and as directed.

M&L for preparation of old treated surfaces of ceiling and applying one coat of oil bound distemper, white or tinted complete all as specified and as directed.

M&L for preparation of old painted wooden or wood based material of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of existing old camouflage painted steel surfaces and applying one coat of synthetic enamel paint of olive green colour as base coat and making camouflage pattern by applying two more coats of different coloured patches in different shapes up to a height of 10 metre complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F steel rolling shutters (1mm thick laths), without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete and all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F ball bearing for rolling shutters complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified.

M&L for 40 mm thick (compacted thickness) PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor, surface finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sq. M but n exc 4.0 Sq.m each complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, etc complete all as specified and as directed.

M&L for 35mm thick 2nd class hardwood plain framed, paneled factory made shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for preparation of wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified

S&F rotational moulded polyethylene water storage tank 1000 Ltrs (Cylindrical Vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part-I with and including 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and taking down of old unserviceable PVC tank complete all as specified and as directed.

S&F Vitreous China counter wash basin, oval shape, white, with and including waste pipe to be provided concealed including provn of CP bottle trap and bend, a pair of angle iron (40 x 40 x 6)mm bracket fixed in wall with PCC block 100mm x 100mm x 150mm (1:3:6) type C1 (using 20mm graded stone aggregates), with and including fixed on 20mm thick granite slab and rounding edges complete all as specified and as directed.

S&F waste coupling of cast copper alloy CP 32mm dia complete all as specified and as directed.

S&F Grating flat round, 1.6mm thick complete all as specified and as directed. Make:- Prayag AISI-304 or equivalent as per list of makes.

S&F 15mm dia fancy type chromium plated bib taps, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type B-2, (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 with and including one coat of zinc chromate primer etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerb or benching with and including necessary use and waste of form work complete all as specified and as directed.

M&L for hard core of gauge n exc 63mm broken brick, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking out old sub main copper/aluminium cable of various sizes from existing conduit/ batten complete all as specified and as directed.

Taking down old MCB DB all types including MCBs etc complete all as specified and as directed.

M&L for Point Wiring for one light or one fan point controlled by one way switch complete with 1.5 Sq.mm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site requirement accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc with and including 1.5 Sq.mm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick Bakelite sheet top cover for complete all as specified and as directed.

Description all as per sol item No. 73 here -in- before but for One 3 pin socket outlet, 5/6 amps, on independent board complete all as specified and as directed.

Description all as per sol item No. 73 here -in- before but for One 3 pin socket outlet, 5/6 amps, on same board complete all as specified and as directed.

Description all as per Srl item No. 73 here -in- before but point wiring with 2.5 sq.mm (nominal area) FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade duly earthed with same cable as for wiring above and green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

Description all as per Srl item No. 73 here -in- before but point wiring with 4 sq.mm (nominal area) FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade duly earthed with same cable as for wiring above and green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

S&F LED Bldg Street light fitting 35 - 36W, IP 65 made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35/36 Watt, LED 6000K, complete with all accessories internally pre-wired complete with taking down existing street light fittings complete all as specified and as directed. Make :- Philips Model No BRP046 LED 36 CW MR S1 PSU GR, Havells Model No ENDURACITYLITEPLATPLUSSL35W LED757SASYBOPC, Wipro Model No Skyline Plus LR13- 501- XXX- 57-XX.

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.20 mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 5mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed. Make :- Tata / swastika/ Jindal/ parkas.

Supply, installation, commissioning and testing of 1.50 TR capacity split type air conditioner, hi wall, with copper condenser, BEE 5 star rating, inverter type (DC inverter type) (hot and cool type) R-410A, CFC free split AC with indoor and outdoor units and cordless remote control unit complete all as specified and directed. NOTE :- (a) Power cable between indoor and outdoor unit, necessary copper piping with heat/cold resistant nitrile rubber / foam type insulation, iron stand powder coated for outdoor unit and drain pipe up to the ground level shall be deemed to be included in quoted rate of this item. Make :- Blue Star/ Carrier/ Voltas

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed. Make :- V-Guard, Volina, Pure Volt.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 core complete with and including taking down old unserviceable cable complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 3.5 core complete with and including taking down old unserviceable cable complete all as specified and as directed. Note for Srl item No. 82.00 & 83.00:- Excavation, earthwork and protection of cable shall be measured and paid separately.

Excavation in trenches in soft/Loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out all as required for laying of cables complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15 cm after laying the cable in trenches) complete all as specified and directed.

M&L for kiln well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and as directed.

Supply and laying 80mm bore light grade ISI marked GI tubing laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp, nut, bolts etc complete all as specified and as directed. Make :- Jindal, Prakash, Swastik.

Boring under the bituminous road/ path etc to a depth not less than 600mm from ground and the bore by the process of horizontal boring with manual/ mechanical equipment having sufficient diameter capable for insertion of the 100mm bore pipe without any damage to the concrete/ bitumen pavement including all required materials and making good the disturbed surface to match the existing surface complete all as specified and directed.

M&L for earthing complete with copper plate of size 60x60cm, 3mm thick electrode buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and 20x3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of copper including 25mm dia GI pipe light grade up to 1.5 mtr below GL for protection pipe and 20mm dia GI pipe medium grade for watering pipe, excavation and earth work, charcoal dust, common salt, PCC (1:3:6) type C-1 chamber with cover and RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh all as shown in electrical plate No. 3 connected to earthing test point complete all as specified or indicated including testing on completion complete with taking out existing earthing all as specified and as directed.

S&F 20x3mm size copper strip as in earth continuity conductor or main earthing lead buried in ground, fixed to wall, any other indicated situation for loop earthing and the like up to test point on necessary insulators and fastening screws, rawl plugs etc complete all as specified and as directed.

S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting single phase, 230 volts AC, 50 Hz, metallic body (Heavy Duty) complete with pull cord control for speed and oscillating mechanism, necessary mounting arrangement and making electric connection using three core flexible twisted copper conductor of size 23/0.0076 cable complete all as specified and directed. Make :- Turbo Force of Havells or equivalent of make Almonard, Usha.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) with and including taking down old unserviceable ceiling fan any type and depositing the same in MES store complete all as specified and as directed. Make :- Orient Electric Hector 500 White or equivalent model with BLDC motor in Usha/ Havells

S&F Ceiling rose, surface Bakelite, (65x50)mm, three terminals complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with a single pole MCB 20 Amps complete in sheet metal enclosure complete all specified and as directed. Make :- Schneider/ Legrand/ Havells.

S&F 1100 volts grade heavy duty two single core 6 Sq.mm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 6 Sq.mm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO RUNS OF SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.

S&F factory made VTPN MCCB DB, IP-54 protection IK09 with metal door with 160 Amps copper bus bar with 2 neutral bus bar, earth bar, cables ties for cable management fully insulated bus bar with set of wires and door earthing suitable for provision of 160 Amps MCCB as incomer and SP/TP MCB's as outgoing 8 way etc complete all as specified and directed. Make :- Legrand Cat part No. 5077 52 DPX³ 160+24, 8 Way or equivalent in Siemens/ ABB/ Schneider.

S&F MCCB 63 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified and as directed. Make :- Schneider/ Siemens/ Legrand

Supply and fixing flush mounting factory made SPN DB Double door, IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar 8 way with 200 Amps rated bus bar complete all as specified and as directed. Make :- Schneider/ Siemens/ Legrand.

Supply and fixing MCB SPN (single pole and neutral), 240 volts, 40 Amps breaking capacity 10 KA, ‘C’ Series. etc, complete all as specified and as directed. Make :- Schneider/ Siemens/ Legrand

Supply and fixing MCB SP (single pole) 240 volts, 6 - 32 Amps, 50HZ, 10 KA, ‘C’ series complete all as specified and directed. Make :- Schneider/ Siemens/ Legrand.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 & 15/16 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.

S&F switch piano flush type single pole one way, 15/16 Amp complete all as specified and directed.

S&F Rotary type electronic fan regulator 5 Step AC, 230V, Single phase, complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode (600x600)mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade up to 1.5 mtr below GL for protection pipe, 20mm dia GI pipe medium grade up to 1.5 mtr below GL for watering pipe, excavation and earth work, charcoal dust, common salt, PCC (1:3:6) type C-1 chamber with cover and RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh complete all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion complete with taking out existing earthing all as directed by Engr-in-Charge.

NOORI ENTERPRISES

M/s M Aali construction co

Ikrar khan & co.

M/s Agarwal Builders