REPAIR/MAINT OF INTERNAL ELECTRIFICATION AND MISC ITEM AT ADM SITE BHOWALI AT AF STN BHOWALI

Amount

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing coping including earth wire complete all as specified and directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .

All as per Serial Item No.4 above but for one 3/5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Serial Item No. 4 above but for one 3/5 pin socket outlet 5 Amps on indepent board complete all as specified and as directed.

All as per serial Item No.4 above but for 5/15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed

M & L for pointing wiring with 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit and its accessories including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing,including steel box of required module for modular switches/sockets all as specified for :-Note:- surface Conduit shall be laid in celing portion only.

(a) One light/fan point controlled by one switch.

(b) One 3 pin 5 amps socket point on independent board

(c) One 3 pin 5 amps socket point on same board

(d) One bell/buzzer point controlled by bell push

(e) All as per item No 8 above but for one light point controlled by two 2 way switches.

All as per Serial Item No.8.00 above but wiring in existing conduit / casing & caping for one way switch One light/ fan/bell point controlled by one, one way switch 5Amps complete all as specified and directed .

All as per Serial Item No.8.00 above but wiring in existing conduit / casing & caping for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Serial Item No.8.00 above but wiring in existing conduit / casing & caping for one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per serial Item No.8.00 above but wiring in existing conduit / casing & caping for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

M & L for pointing wiring with 2.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit and its accessories including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, including steel box of required module for modular switches/sockets all as specified and directed by Engr-in-charge .

M&L point wiring with 1.5 Sqmm (nominal Area), 650 /1100 Volts grade, PVC insulated FRLS multi stranded unsheathed copper conductor cable, in and including ERW rigid steel heavy duty conduit, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for one light point/fan point controlled by one rotary switch complete all as specified and directed by Engineer-in-Charge.

M&L point wiring with 2.5 Sqmm (nominal Area), 650 /1100 Volts grade, PVC insulated FRLS multi stranded unsheathed copper conductor cable, in and including ERW rigid steel heavy duty conduit, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for socket point controlled by one rotary switch complete all as specified and directed by Engineer-in-Charge.

M&L point wiring with 4.0 Sqmm (nominal Area), 1100 Volts grade, PVC insulated FRLSmulti stranded unsheathed copper conductor cable, in and including ERW rigid steel heavy duty conduit, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for one socket point controlled by one switch with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed by Engineer-in-Charge.

S&F for flame proof weather proof rotary switch, single pole, on & off, with cable termination box in LM 6 of 16 Amps rating 250 volt complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed.

Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A,250V, 2P+ earth complete all as specified and directed.

Supply and Fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body Make:Plaza/Fine/Anchor complete all as specified and directed.

Supply and Fixing Modular switch 1 way 6A, 1 module.complete all as specified and directed.

Supply and Fixing Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and Fixing Modular switch 2 way 6A, 1 module complete all as specified and directed.

Supply and Fixing Modular Bell push 6A, 1 module complete all as specified and directed.

Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.

Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

Supply and Fixing Modular fan step regulator, 120W - 2 module complete all as specified and directed.

Supply and Fixing Modular White cover plate with frame,1 module complete all as specified and directed.

Supply and Fixing Modular White cover plate with frame,3 module complete all as specified and directed.

Supply and Fixing Modular White cover plate with frame,6 module complete all as specified and directed.

Supply and Fixing Modular White cover plate with frame,8 module complete all as specified and directed.

Supply and Fixing Switch piano, flush button, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed.

Supply and Fixing Switch piano, flush button, single pole, two way, 15 Amps, 230 Volts complete all as specified and as directed.

Supply and Fixing Socket outlet 5 Amps 2-in-1,3/5 pin 230V AC flush type, complete all as specified and directed.

Supply and Fixing Socket outlet 15 Amps 2-in-1,3/5 pin 230V AC flush type, complete all as specified and directed.

Supply and Fixing Bell, ding dong / multi music type, AC, 230 volts, single pole complete all as specified and as directed.

Supply and Fixing Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

Supply and Fixing Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

Supply and Fixing Submain wiring with two runs of 4 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing conduit/casing caping and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement.

Supply and Fixing LED light fitting 1X10W bulk head luminaries, with lamp holders with all accessories including 10 W LED bulb including taking down old fitting complete all as specified and as directed Make : Havells /Bajaj/CG

Supply and fixing LED light fitting 20W with batten 6500K colour temp, decorative type with all accessories internally pre wired including tube rod and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and as directed Make : Havells/Bajaj /Syska

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete. taking down old fitting complete all as specified and as directed Make : Havells/Bajaj /syska

Supply and fixing LED Recess mounting 2x2 ft luminaire with high brightness suitable for Armstrong/grid ceiling 42/40 Watt decorative type with all accessories internally pre wired complete and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and as directed Make : Havells/Bajaj /syska

Supply and Fixing of pride plus Inverter LED batten 20 Watt,6500 K, 230 Volt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours complete all as specified and directed by engineer-in-charge. make havells,cat part no LHEXACP7FN1W020 or equivalent in crompton/bajaj/wipro

Supply and fix LED light fitting 1X12 W down light wave slim panel light luminaries, with lamp with all accessories including 12 W LED bulb including taking down old fitting complete all as specified and as directed cat part no D811265 make wipro or equivalent in complete all as specified and directed by engineer-in-charge. Make : Havells /Bajaj/CG

Supply and fix LED light fitting 1X15 W down light wave slim panel light luminaries, with lamp with all accessories including 15W LED bulb including taking down old fitting complete all as specified and as directed cat part no D711560 make wipro or equivalent in complete all as specified and directed by engineer-in-charge. Make : Havells/Bajaj /CG

Supply and fix LED light fitting 1X10W down light wave slim panel light luminaries, with lamp with all accessories including 10 W LED bulb including taking down old fitting complete all as specified and as directed cat part no D711060 make wipro or equivalent in complete all as specified and directed by engineer-in-charge .Make : Havells/Bajaj /CG

Supply and fixing FPWP LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.complete all as specified and directed by engineer-in-charge.

Supply and Fixing Lamp Holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed.

Supply and Fixing Factory made distribution board in sheet metal enclosure in single door with out bus bar,SPN 2 way, 240V for fixing MCB's complete all as specified and as directed.

Supply and Fixing Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

Supply and Fixing Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

Supply and Fixing Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps make Havells/legrand/schneider

Supply and Fixing MCB SPN ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

Supply and Fixing MCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed

Supply and Fixing MCB SPN ‘C’ Curve 10KA, 63 amps complete all as specified and directed .

Supply and Fixing Supply and Fixingv MCB SP ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

Supply and Fixing MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed

Supply and Fixing Blankig plate for filling gap of MCB complete all as specified and directed.

Taking down ceiling fan/ Wall mounting fan of any size and sweep from its position and dismantling for servicing including removal of bearing, bushes, condenser, connector, flaxible cord,split pin etc if required, removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades & fan body with soap solution after repairing and re- assamble the same including provision of twisted twin core flexible wire upto 0.7m long of size 28/0.0076 (ISI marked) and connecting to electric system, testing etc and hanging to position / to any location in AF Bhowali Stn complete all as specified and as directed . Note: -(i) Spare parts shall be measured and paid separately as supply only. (ii) Quoted rate is deemed to be inclusive of taking down unserviceable/ defective parts and fixing with new parts. (iii) Quoted rate is deemed to be inclusive of transporting fan from any location in AF Stn to MES store yard.

aking down of exhaust fan 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside AF Bhowali Stn to MES E/M Store Yard / Workshop for servicing of fan, washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade & body thoroughly including provision of new greasingand replacement of worn-out / defective unserviceable parts (wherever necessary), re assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location/other location including making good disturbed surface and testing complete all as specified and as directed . Note: -(i) Spare parts shall be measured and paid separately as supply only (ii) Quoted rate is deemed to be inclusive of taking down unserviceable/ defective parts and fixing with new parts. (iii) Quoted rate is deemed to be inclusive of transporting fan from any location in AF Area to MES store yard.

M& L Spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and as directed

Supply only fan blades (set of three) of any make / type of exhaust fan/ wall mounting fan of size 230/300mm sweep complete all as specified and as directed .

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1200mm sweep complete all as specified and as directed .

Supply only U clamp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and directed by engineer in charge.

Cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Cutting and taking out old burnout winding of 230 mm sweep exhaust fan/wall fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Cutting and taking out old burnout winding of 300 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Cutting and taking out old burnout winding of 380/450 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Supply only ball bearing suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed.

Supply only gun metal bush suitable for exhaust fan of any sweep complete all as specified and as directed.

Supply only gun metal bush suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only condensor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only for replacement metalic bottom plate of ceiling fan of any sweep complete all as specified and as directed

M&L Spray painting with two coats of painting to exhaust fan any type and size with Ist quality synthetic enamel paint, colour as approved after removing existing paint by scrubbing, dusting etc and finally writing the fan numbers etc with paint (Colour as approved ) complete all as specified and as directed.

Dismantling and taking down carefully the existing unserviceable geysers of 25 Ltrs storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldgs) and transporting the same to MES E/M OfficeBhowali Store Yard for carrying out repair work such as De-scaling/ over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete to the satisfaction of Engineer-in-charge.Note: -(i)Replacement of parts shell be measured and paid separately as supply only (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts,nuts,washers of suitable size.complete all as specified and as directed

All as per item no 82.00 here-in-above but 50 Ltr storage capacity Complete all as specified and as directed

Supply only for replacement of the following items with complete and directed by Engineer-in-charge details as under:-

Heating element 1500 watt for geysers including nuts, bolts,gasket etc.Complete all as specified and as directed

Heating element 2000 watt for geysers including nuts, bolts,gasket etc.Complete all as specified and as directed

Neon type indicating lamp (Red/Blue) round/rectangular type 240 volts suitable for geyser of any capacity etc

Thermostat of geysers suitable for 240 voltsAC suitable for geysers of any make/model and capacity (ISI Marked).

Outer body made out of 20 swg MS sheet suitable for 50 litre storage capacity geyser of any make / model duly painted to match with the existing surface.

Outer body made out of 20 swg MS sheet suitable for 25 litre storage capacity geyser of any make / model duly painted to match with the existing surface.

Inlet/ outlet assembly made out of brass/ copper (ISI Marked) suitable for 25 Ltrs capacity Geyser including necessary nuts, bolts, washers and gas kit.

Inlet/ outlet assembly made out of brass/ copper (ISI Marked) suitable for 25 Ltrs capacity Geyser including necessary nuts, bolts, washers and gas kit.

PVC (heavy duty ) flaxible pipe ( each connection have two pipe) of 15mm bore 650mm long with two nos brass coupling suitable for hot water

Pressure release valve/safety valve size as per existing (ISI marked) suitable for geyser capacity 25/50 ltr capacity.

Supply and replacement of the following items to match with old existing model & color and connected items, complete all as specified and directed by Engineer-in-charge.

Top and bottom cover geyser 25 ltrs capacity of any make / model duly painted to match with the existing surface.

Top and bottom cover geyser 50 ltrs capacity of any make / model duly painted to match with the existing surface.

Taking down carefully defective split type AC including transporation of the same from MES store yard or site to the workshop and back, refixing / reinstalling, connecting and testing the same after replacement of defective / burnt compresssor sealed unit by providing new compressor suitable for 2.00 TR capacity AC purchased directly from the authorised dealer, flushing of condenser and charging with required quantity of appropriate refrigerant gas complete all as specified and directed.

AJA BUILDERS (BID ID -3384097)

SIDDHIDATRI CONSTRUCTION (BID ID -3389205)

Ramsons (BID ID -3388942)