SPECIAL REPAIR TO JCO MD ACCN BLDG NO P-1/10/01-04 OF 12 KUMAON AND PROVN OF BOUNDRY WALL NEAR RANE ENCLAVE AT 7E AREA AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2.0 Sqm each complete all as specified and directed.

Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base to flooring.

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling and complete all as specified and directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling and complete all as specified and directed

M & L, glazed joint free coloured ceramic tiles in vertical surface , 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match incl dismantling complete all as specified and directed.

M&L for machine cut kota stone slab in one pices for stair case flooring 20-25 mm thick and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.

M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.

Ditto as per item no 13 but in cm 1:4 (external surfaces)

M&L for 5 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers electrically operated sanding machine. Application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface of wall/ceiling to prepare the old /new surface even and smooth complete all as specified and directed..

S&F factory made single extruded WPC (Wood Polymer Composite) solid door frame/chowkat of size 125x63 comprising of virgin PVC polymerof K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body treaded star headed SS screws having min frame density of 750 kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge, miniumum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance tto spread of flame of class ‘A’ category with property of being termite /borer proof, water/moisture proof & fire retardant & fixed in position with SS dash fasterns/hold fast of required dia and length, colour of door frame to match that of shutter all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door frame/chowkat of size 100x50 comprising of virgin PVC polymerof K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body treaded star headed SS screws having min frame density of 750 kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge, miniumum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance tto spread of flame of class ‘A’ category with property of being termite /borer proof, water/moisture proof & fire retardant & fixed in position with SS dash fasterns/hold fast of required dia and length, colour of door frame to match that of shutter incl SS hinges all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter pre-laminated both side of 30 mm size comprising of virgin PVC resin of K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) having min density of 650 kg/Cum and screw withdrawal strength of 1800 N ( Face) & 900 N (edge) Minimum Compressive strength of 50 N /mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer proof, Water/Moisture Proof, Fire retardant and including with fixing stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, Material test certificate and authenctication sould be complosory provided by the manufacturing company.

S&F for 30 mm thick factory made solid WPC (Wood plastic Composite) gauged door shutter with wire mesh in three number of division with brown wood gain texture, wire mesh fixed with (15 x 15) mm square tubes in side rails with screwing 8 x 28 heat metal zinc coated screws that can be removed or fixed again after changing of wire mesh when needed covered with moulded beading. The density of the WPC material shall be as per manufacturer instruction. Complete all as specified and directed.

S&F, solid WPC door frame of size 63mm x 50 mm with decorative laminates in opening of Cup Board as per specification incl SS hinges complete all as specified and directed.

S&F 18-20 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.

S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed.

S&F extruded Aluminium alloy handle fabricated annodised 150 mm size, complete all as specified and as directed .

S&F 300 mm long aluminium alloy annodised slidding door bolt with hasp and satple (bolt type) and fixing clips of sheet castor extruded sections and fixing bolts and slidding bolts of extruded section or cast aluminium alloy and fixed all as spd and directed

S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F uPVC casement window with net & grill single of multi shutter turn window are made out of multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using sash mullion having 50x64x2.5mm multi-cavity uPVC section, suitably GI reinforced and shutters will be made from uPVC section of size 50x85x2.5mm, reinforced and welded in corners with EDPM gasket, provision for glass and for air tight at frames and outer side of shutters with style glazed window shutter with and including suitable size glass beading, hinges, handles, stay etc complete. Mosquito mesh shutter shall be made from UPVC extruded section of size 61x27x2mm with GI channel of 1.2mm thick, welded in corners, mosquito net shall be of fibre be fitted in shutter with proper required accessories like hinges, MS grill of 12mm round pipe be inserted in main frame & screwed by hidden screwing system with powder coating etc, complete all as directed. (glass & wire net measured and paid seprately)

Supply and Fixing sheet glass 4-5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter pre-laminated both side of 28-30 mm size comprising of virgin PVC resin of K value 58-60 (suspension Grade), Calcium Carbonate and natural Fibers (wood Powders/rice husk/wheat husk) and Non toxic additives (maxtoxicity index of 12 for 100 gms) having min density of 650 kg/Cum and screw withdrawal strength of 1800 N ( Face) & 900 N (edge) Minimum Compressive strength of 50 N /mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer proof, Water/Moisture Proof, Fire retardant and including with fixing stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, Material test certificate and authenctication sould be complosory provided by the manufacturing company.

S&F factory made 100% solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as incl SS hinges directed by Engineer-in-charge.

M&L, 18 to 20 mm thick Green Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges including dismantling old stone slab complete all as specified and as directed.

Providing cement concrete 75 mm thick type D-2 (1:4:8) using 40 mm graded agg as in sub base to flooring.

S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

S & F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm screed bed in CM 1:6 and incl demolition PCC./tile complete all as specefied

M&L for RCC (Nominal mix)Type 1:2:4 type B-1 as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs Stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.

S&F in repairs PVC low level 10 liter capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required and connections complete complete all as specified and directed

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required incl complete complete all as specified and directed

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repair oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed.

S&F in repair 32mm bore bottle trap of of PTMT having minium water seal of 25mm ( minimum weight 32mm-260gms) complete all as specified and directed.

S&F in repair 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed

S&F in repair, Brass CP wash basin mixer(long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F in repair, Brass CP wall mixer (long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.

S & F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repair 5mm thick glass shelf/mirror self of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

S&F in repair 6mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed.

Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

Supply & Fix in repair 15 mm bore Stop valves cast copper alloy chromim plated fancy type with long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply & Fix in repair Brass chromium plated shower rose 125mm size with or with out swivel joint fixing to steel pipe or for unions complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S & F PVC (SWR) junction single,(Single T) equal or unequal 75 mm dia

S &F PVC (SWR) 75 mm dia vent cowl

Supply & Fix 110 mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed.

Supply & Fix 110mm PVC (SWR) reducers complete all as specified and directed.

S&F in repair Sinks made of stainless steel 1mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed.

S&F in repair kitchen plate rack of stainless steel of size 720mm x 600mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.

S&F in repair PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction.

M & L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 including Demolition of brick work,PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc complete all as spd and directed

M&L, providing cement concrete1:2:4 type B1 using 20mm graded stone aggregate as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

Supply only water proofing compound ,complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.

M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed .

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed

S&F in repair decorative curtain rod made of MS pipe covered with coloured PVC layer dia of rod 25 mm with decorative ends complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in Cement mortar 1:6 complete all as specified and directed

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed.

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in hard soil complete all as specified and directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Demolition and breaking up drain pipes (Salt glazed ware ,AC or reinforced concrete ) det in cement mortar internal dia of pipe in 150mm to 200mm dia

M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .

M&L for concrete bed to 200mm drain pipes including forming cradles in PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed .

M & L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M & L for RCC M-25 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M & L for RCC M-25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed

M & L for Precast cement concrete block masonry (Type C1, 1 : 3 : 6 with 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1 : 6, complete all specified and directed.

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410-W(Gde- E-250) quality B complete all as specified and directed.

M & L for prepation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed

M&L for MS TMT bars 10 mm Dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips .

Ditto all as per item No 124 above but 5 mm Dia and over upto and including 10 mm dia in stirrups, spacers and binders

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each treated with tar of coal tar complete all as specified and directed

Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with required size of modular sunken box and Modular cover plate for mounting Modular switch, socket and regulator & all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

Ditto as per Item No 128 above but, (b) One light pointpoint controlled by two way switch of 5/6 Amps.

Ditto as per Item No 128 above but, (c) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

Ditto as per Item No 128 above but, (d) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

Ditto as per Item No 128 above but, (e) One bell point point controlled by one bell push switch of 5/6 Amps.

Ditto as per Item No 128 above but, (f)All as per item 2 herein above but with 4.0 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S & F Modular Switch, white finish, 5/6 amps, single pole, two way all as specified and directed.

S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

Supply and Fixing modular bell push 1 Module 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed.

Supply and Fixing bell electric multi music type, AC, SP 240 volts, sound as approved, complete as all specified and directed.

S & F Electronic fan regulator modular stepped type two module with five steps 240 Volts, 100 Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as directed by Engr-in-Charge.

S & F white cover plate with frame modular type of 02 module complte all as specified and directed.

S & F white cover plate with frame modular type of 03 module complte all as specified and directed.

S & F white cover plate with frame modular type of 04 module complte all as specified and directed.

S & F white cover plate with frame modular type of 06 module complte all as specified and directed.

S & F white cover plate with frame modular type of 08 module complte all as specified and directed.

S & F metal flush box modular type of 02 module complte all as specified and directed.

S & F metal flush box modular type of 03 module complte all as specified and directed.

S & F metal flush box modular type of 04 module complte all as specified and directed.

S & F metal flush box modular type of 06 module complte all as specified and directed.

S & F metal flush box modular type of 08 module complte all as specified and directed.

Taking down ceiling fan 1200 mm sweep/Exhaut fan of any size complete cleaning the grease oil etc spray painting with 2 coats of synthetic emamelled paint over a coat of primer including replacement of bearing, capacitor, cotton pin, rubber coal, MS nuts bolts washer, connector prewired from connector from connector to ceiling rose with twin core flexible copper conductor cable 24/0.02 refixing in position connecting testing etc complete all as specified and directed.

Supply and Fixing in repair LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

S&F inverter LED lamp, 6500K, 900lm in white colour of 12 Watt, base cap B-22 with polycarbonate diffuser and aluminium heat sink complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x20 Watt,four feet long) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x10 Watt,two feet long) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S & F 1x60 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F Sub main wiring with two single run (with proper colour code as per IE rule) of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including PVC conduit of 25 mm dia or higher dia medium grade ISI marked with and including necessary conduit accessories, concealed type including 6 Sqmm multi stranded copper conductor PVC insulated cable as earth wire(Green in colour) connected to common earth dolly, including taking down old U/S submain wiring complete all as specified and directed.

Material and Labour for earthing in repair complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&F in repair Socket residual current device with socket plug top and MCB with a three pin earth plug and socket complete with on DP MCB 25 Amp complete all as specified and directed.

Supply and Fixing in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, DP, 12 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA C Curve complete all as specified and directed.

Supply and Fix MCB DP 240 volts, 40 amps, C Curve of 10 KA complete all as specified and directed.

S&F MCB Triple pole & Neutral 415 volts, 63 amps, C Curve of 10 KA complete all as specified and directed.

Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work and making the surface good to match with existing surface all as specified and directed by Engr-in-Charge.

M/S RAMESH SINGH ADHIKARI (BID ID -3376667)

m/s MD pandey sons (BID ID -3377234)

m/s RC punetha (BID ID -3370446)

SHAHJEE FRIDGE SERVICE (BID ID -3376924)

M/s Rana Enterprises (BID ID -3370799)

m/s harish kumar punera (BID ID -3375549)

M/S KS Shahi and Sons (BID ID -3375779)