PROVN OF CHAIN LINK FENCING TO OFFRS MESS AND OFFRS GUEST SUITE IN ZONE G AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Excavation in post holes ( Or similar holes) each n Exc 0.5Cum getting out, ramming earth or broken rubble mixed with earth around, in layers N.exc 25cm watering and removing surplus soil to a distance N.Exc 50m and making good the disturb surface in soft/loose soil all as specified and directed

M&L for PCC (1:3:6) type C-2 ( Using 40mm graded aggregate) as in embedding of fencing post all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc,MS iron flats ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc,and similar work confirming to Fe 290 Gde E-165 all as specified and directed.

M&L for MS TMT bars 8 to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F mild steel screw bolts 11mm to 15mm dia( Machine made) with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc.5 cm and not exc 10 cm long all as specified and directed

S&F MS flat iron fillets including hexagonal bolts for fixing to fencing post including securing bolts, cut to shape, drilling holes, notching for wire, bolting or riveting etc and similar works confirming to Fe-290 Gde-E-165 all as specified and directed.

Supply only chain link MS Galvanised fencing any size or any type

Fixing only chain link fencing

S&F Mild Steel framed work as in doors or gates of angle or other section conforming to Fe -410-W(Gde-E-250 quality-A) with gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, all as specified and as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work with ornamental and intricate design conforming to Fe.290.Gde-E-165,all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description N Exc 10cm width or girth all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, all as specified and as directed.

M/s Amrit Gope

M/S C.S.P. ENTERPRISE

M/S PAUL ENTERPRISE

SHRI RAJESH DEY

M/S PRITAM ENTERPRISES

M/S SANKAR GOPE