Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-Finance | ₹7.1 L | L1 | Accepted-Finance L1 |
| 2 | L2₹8.3 LAccepted-Finance | ₹8.3 L | L2 | Accepted-Finance L2 |
| 3 | L3₹8.5 LAccepted-Finance | ₹8.5 L | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | Nazeer-Contractor L3 | ANAND KRISHNA DEEP L2 | Jayaram J L1 |
|---|---|---|---|---|---|---|
| 1.00Side protection | ||||||
| 1.00 | 16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade | 310 | sqm | 1,300 ₹4.0 L | 1,258 ₹3.9 L | 1,075 ₹3.3 L |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 715 | kg | 264 ₹1.9 L | 257 ₹1.8 L | 218 ₹1.6 L |
| 1.00 | 16.19:Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | 1,456.94 | kilogram | 140 ₹2.0 L | 139 ₹2.0 L | 122 ₹1.8 L |
| 1.00 | 13.50.4:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | 124.44 | sqm | 40 ₹4,977.60 | 38 ₹4,728.72 | 35 ₹4,355.40 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 124.44 | sqm | 185 ₹23,021.40 | 183 ₹22,772.52 | 155 ₹19,288.20 |
| 1.01 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 50 | kg | 160 ₹8,000 | 155 ₹7,750 | 132 ₹6,600 |
| 1.01 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources) | 0.54 | cum | 11,000 ₹5,940 | 10,874 ₹5,871.96 | 9,100 ₹4,914 |
| 1.01 | 10.20:Providing and fixing bolts including nuts and washers complete. | 46.09 | kg | 200 ₹9,218 | 195 ₹8,987.55 | 165 ₹7,604.85 |
Tender Value
₹7.6 L
EMD Value
₹19,009
Closing Date
16 May 2026, 5:30 pmClosed
Asst.Executive Engineer
O/o Asst.Executive Engineer,INSDN,PMG,TVPM
GENERAL-Fencing work-Fensing and allied work of Ayiroor River in Ayiroor bridge-General Civil Work
2026_Irrig_850400_1
IRR/IA/EST/7414/2025_5_1_1
Open Tender
Civil Works - Others
Ayiroor
Please refer Tender documents.
11 documents required · 11 mandatory
₹1,680
Yes
₹19,009
Yes
12 Jun 2026
12 May 2026
19 May 2026
12 May 2026
16 May 2026
12 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Side protection | ||||||
| 1.001 | 16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade | - | sqm | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 16.19:Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | - | kilogram | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 13.50.4:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | 1 | sqm | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1 | sqm | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kg | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 10.20:Providing and fixing bolts including nuts and washers complete. | - | kg | - | - | BI01010001010000000000000515BI0100001121 |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1436918.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1436918.xls
BOQ • 0.30 MB
bid.pdf
Tender Documents • 2.79 MB
Download all tender documents and submit your bid
