ADDN ALTN TO BLDG P_ 72DRILL SHED AND PROVN OF CERTAIN SANCTIONED WORKS AT INS DRONACHARYA

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good the disturbed surfaces of walls, floors to match the existing , all as directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including PVC casing & caping of 20mm or higher complete with all accessories fixed to wall / ceiling and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc for one light / fan point controlled by one, one way switch 06 Amps,all as specified and as directed.

All as per srl item No 02 here-in-above but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 02 here-in-above but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial Item No 02 here-in-above but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fix modular switch with indicator, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete, all as specified and as directed.

Supply and fixing modular switch with indicator, 16 Amps, single pole, one way, 250 volts, two module and IP 20 protection complete ,all as specified and as directed.

Supply and fixing modular socket outlet 05 Pin, 06 Amps, 02 module with shutter ,all as specified and as directed.

Supply and fixing modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter ,all as specified and as directed.

Supply and fixing ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 120 watts, duly ISI marked ,all as specified and as directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size ,all as specified and as directed.

Supply and fix in replacement of surface mounted LED tube light fitting four feet long, 2000 lumen, 6500K with IP 20 protection comprises of heavy aluminium extruded channel, extruded polycarbonate diffuser, integrated potted electronic driver, etc and all accessories pre-wired including connecting up complete, all as specified and as directed. Make : Philips, Cat No : BN150W LED20S-6500 PSE OD GR or equivalent in Havells/Crompton/Wipro/Bajaj.

Supply and fix in replacement , recessed mounted LED ceiling light fitting 2'x2' with an inbuilt sensor, 3650 lumen, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete ,all as specified and as directed. Make : Philips, Cat part No : RC383B LED 36S-6500 PSU OD WH PIR or equivalent in Havells/Crompton/Wipro/Bajaj.

Supply and fix ceiling fan of 1400 mm sweep, 220 - 240 volts, AC, 50 Hz including hanging with the help of fan hook, down rod up to 02 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as specified and as directed. Make :Crompton, Model : WW HE or equivalent in Usha / Havells/ Bajaj /Khaitan/ Almonard/Orient

Material and labour for sub main wiring with 2 runs of 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including PVC casing & caping with accessories of 25mm or higher including taking out the unserviceable sub main wiring and making good to the disturbed surfaces to match the existing complete all as specified and as directed. (Note : 2 run of sub main wire, one run of earth wire and PVC casing and capingwith accesories shall be measured as one unit).

Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed. Make: - Legrand, Cat No. 5078 11 & 4085 93 or equivalent in Hager, Cat No : VYA120C & NCN120N or Schneider, Cat No : A9HMS220 & A9N1P20C.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :- Legrand, Cat No. 5076 12 & 5079 15 or equivalent in Hager, Cat No : VYS12D & VYS12E or Schneider, Cat No : A9HSND12 & A9HSND12WB.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and as directed. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 63 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and as directed. Make :- Legrand, Cat No. 4086 39 or equivalent in Hager, Cat No : NCN263N or Schneider, Cat No : A9N2P63C.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed ,comprising of the following Make of DB :- Legrand, Cat No. 5077 50 & 5079 38 or equivalent in Hager, Cat No : VYV04PM & VYV00E or Schneider, Cat No : A9HVD04M & A9HVDXXWB.

(a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity - 01 No. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No. NCN106N to NCN132N or Schneider, Cat No. A9N1P06C to A9N1P32C.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 25 Sq mm 04 core size in trenches, on wall, road crossing through protection pipe etc. including taking out the unserviceable cable complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil all as specified and as directed.

M & L Returning and filling in of soil including spreading leveling, watering and ramming in layers not exceeding 25 cm complete all as specified.

M & L Removing excavated soil to a distance not exceeding 50 meter and not exceeding 1.5 meter above the starting point, and depositing where directed complete all as specified.

M&L sand cushioning in trenches using clean dry river sand for cable cushioning all as specified and as directed. Note : Thickness of sand cushioning after punning down will be measured and paid.

Supply and laying 50 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection all as specified and as directed.

Supply and lay sub class "B" burnt bricks, as in cable protection, laid length of brick perpendicular to length of cable complete all as specified and as directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fix in replacement of recessed mounted downlighter, 1500 lumen, 4000K with pressure die cast aluminium heat sink and PC diffuser in white powder coated finish with integrated driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells, Cat No : INTEGRAGRANDDLR15WLED840S or equivalent in Crompton or Philips.

Supply and fix in replacement of recessed mounted LED downlighter, 1000 lumen, 4000K with pressure die cast aluminium heat sink and PC diffuser in white powder coated finish with integrated driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells, Cat No : INTEGRAGRANDDLR10WLED840S or equivalent in Crompton or Philips.

Supply and fix in replacement of recessed mounted adjustable LED downlighter, 2000 lumen, 4000K made of extruded aluminium housing and high power LED as a light source with clear diffuser and separate electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells, Cat No : SPARKLEPROADJDLR20W840MOD40D or equivalent in Crompton or Philips.

Supply and fix energy saving LED post top lantern 25 Watt, IP 65 protection with symmetrical light distribution, spun aluminium landscapoe luminarie with high power LEDs complete all as specified directed. Make : Havells, Cat No : RUBYPT25WLED757PSYMTOPC or equivalent in Philips or Crompton.

Supply and fix energy saving ceiling fan of 1200 mm sweep, 220 - 240 volts, AC, 50 Hz with BEE 5 star rated including hanging with the help of fan hook, down rod up to 02 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as directed. Make : Crompton, Model : HS Plus or equivalent in Usha, Model : Energia 32or equivalent in Bajaj /Havells/Khaitan/ Almonard/Orient

Supply, install, testing and commissioning LT panel board CPRI approved factory made, indoor type pedestal mounted on PCC, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system having bus bar chamber with colour coded air insulated PVC sleeved copper bus bar on DMC / SMC insulators. The panel board shall be weather proof with IP-54 protection and fabricated with 2 mm thick CRCA sheet and detachable gland plate of 3 mm thick duly powder coated after seven tank process fixed on MS angle iron of size 50 x 50 x 6 mm thick for frame work and pedestal The panel shall be openable from front side with suitable locking arrangement with keys. Adequate space all around for keeping acessories such as LT switchgear and measuring instruments etc including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt or PVC sleeved copper strips of appropriate size including Stenceling of panel board ,marking distributions including taking down old unserviceable LT panel board complete with the following accessories all as specified and as directed.

(a) PVC sleeved, TPN copper bus bar 800 Amps capacity for phase and neutral - 01 Set. (b) MCCB, 400 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete - 01 No. (c) MCCB, 250 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete - 02 Nos. (d) LED multifunction meter for measuring volt, Amp, kWh etc - 01 No. (e) Phase indicating LED lamp (RYB) - 01 Set.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 240 Sq mm 3.5 core size in trenches, on wall, road crossing through protection pipe etc. including taking down old unserviceable cable complete all as specified and directed.

Supply and laying 80 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover, class LV type 1, flat of size 250 x 150 x 40 MM all as specified and as directed.

Albert Rebello and Company