Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.6 LAccepted-AOC | 1 | Accepted-AOC LOWEST QUOTED | |
| 2 | 2₹1.7 L+₹4,466.80 (2.75%)Rejected-Finance | 2 | Rejected-Finance HIGHEST |
| Sl No | Description | Qty | Unit | Sajith Babu S L1 | Anshad N M L2 |
|---|---|---|---|---|---|
| 1.10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting to size and shape wherever required. | 62.35 | sqm | 810 ₹50,503.5 Lowest | 825 ₹51,438.75 |
| 1.20 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain
(500-600 mm) | 15 | m | 550 ₹8,250 | 530 ₹7,950 Lowest |
| 1.30 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete | 422.31 | kg | 195 ₹82,350.45 Lowest | 200 ₹84,462 |
| 1.40 | Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the
excavated soil, then returning the soil as required in layers not exceeding 20 cm in
depth, including consolidating each deposited layer by ramming, watering etc,
disposing of surplus excavated soil; as directed within a lead of 50 m and lift up to 1.5
m.All kinds of soil | 4 | nos | 80 ₹320 Lowest | 110 ₹440 |
| 1.50 | Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand
(zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources) | 0.6 | cum | 8,500 ₹5,100 Lowest | 9,200 ₹5,520 |
| 1.60 | Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work | 40 | sqm | 160 ₹6,400 Lowest | 160 ₹6,400 Lowest |
| 1.70 | Providing and fixing on roof with 200mm square PVC rain water gutter pipes
including jointing sealing and fitting with pathy clamps at 1m interval etc. complete as
per the direction of Engineer in charge. | 15 | m | 600 ₹9,000 Lowest | 670 ₹10,050 |
| 1.80 | End drop and End cap with approved quality | 1 | set | 450 ₹450 Lowest | 580 ₹580 |
Tender Value
₹1.8 L
EMD Value
₹4,600
Closing Date
4 Feb 2026, 5:00 pmClosed
Divisional Forest Officer Kothamangalam
Divisional Forest Office Kothamangalam
The proposed project involves The work includes construction of a parking shed in front of the Kothamangalam Section Office and fixing of rainwater gutter.
2026_FD_831080_1
KFDDO 65292/2025 DFOKGLM DM
Open Tender
Civil Works - Others
Item Rate
30 days
Kothamangalam
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹4,600
4 Mar 2026
27 Jan 2026
7 Feb 2026
27 Jan 2026
4 Feb 2026
27 Jan 2026
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift up to 1.5 m.All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Providing and fixing on roof with 200mm square PVC rain water gutter pipes including jointing sealing and fitting with pathy clamps at 1m interval etc. complete as per the direction of Engineer in charge.
End drop and End cap with approved quality
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 3.33 MB
Preliminaryagreementnew.pdf
Tender Documents • 0.06 MB
FORMOFTENDER.pdf
Tender Documents • 0.29 MB
NITPARKINGSHED.pdf
Tender Documents • 3.32 MB
BOQ_1396328.xls
BOQ • 0.22 MB
EPAYMENT.pdf
Tender Documents • 0.01 MB
INTEGRITYPACT.pdf
Tender Documents • 0.26 MB
AFFIDAVIT.pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .