Construction of Veterinary Dispensary at Barana in Tehsil Baroh, Distt Kangra (HP) Deposit Work

Amount

Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinjg shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drainage, design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work in all banking in 20cm (Twenty centimetres) layer including breaking clods ramming and dressing ground for the purpose of making embankment and filling up ground depression upto as directed by the Engineer-Incharge, including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and Plinth, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 ( One Cement isto six Sand isto twelve graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and Plinth, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry/ polygonal rubble masonry (uncoursed/ brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement isto Six Sand isto Twelve graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement isto Six Sand). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (One cement isto Six Sand). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:3 (One cement isto Thre Sand). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp proof course 38mm (Thirty eight milimetre) thick with cement concrete 1:2:4 (One cement isto Two Sand isto Four graded crushed stone aggregate 12.5mm nominal size) mechanically mixed and curing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt) 80/100 or equivalent using 1.70 kg per square metre on amp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Filling in Plinth with sand under floors including watering ramming and consolidating and dressing complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Boulder filling/brick bats aggregate under floor/ soak pit including watering, ramming, consolidating and testing complete within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry in common burnt clay building bricks in super structure above plinth level upto floor any level in cement mortar 1:6 (One Cement is to Six Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for heights of propping and centring below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams, beam, hunchings, cantilevers, bressumers and lintels upto all depths, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron in frame 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering, strutting and propping etcetra with wooden battens and ballies complete upto all heights/ depth of propping and centering below supporting floor to ceiling upto all height and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre).,so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies heights of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls any thickness partition and the like including attached pilasters, buttresses, plinth and string courses and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not less than 330 Kgs/m3 (three hundred thirty kilogrammes per Cubicmetre) 20mm (Twenty milimetre) crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns and the like and mass concrete in all depths/thickness above plinth to upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilogrammes per Cubicmetre) 20mm (Twenty milimetre) crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, lintel beams, girders, breassumers and cantilever all depth/thickness up to plinth to all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced cement concrete work including cutting, straighting, bending, binding and placing in position and including cost of binding wire complete for all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron doors, windows clerestory windows frame (single rebate) manufactured from M.S. angle iron section of 40x40x6mm (Forty into forty into six millimetres) thickness and M.S. flat 50x5 (fifty into five millimetres) as per design and drawing including hinges, jambs lock, jambs beeds and if required angles thrashold of M.S. angle 50x25mm (Fifty into twenty five millimetres) welded or rigidly fixed by mechanically means lugs with split ends tails to each jambs including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangements and shock observer as specified and applying coat of approved steel primer after pre-treatment of the surfaces complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron door,window,clerestory window frame(double rebate) manufactured from steel iron section of 40X40X4 mm (forty into forty into four millimetre) thickness and MS flat 50x4mm (fifty into four millimetre) and 12 x 4mm ( Twevle into four millimetre) as per drawing including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodised transparent or dyed to required shade according to IS:1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as per specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clearstory windows including black enamelled iron butt hinges with necessary screws 40mm thick 2nd class deodar wood within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick both sides water proof particle preliminated board BWP phenol bonded exterior/interior grade both sides of Kitply/Action/ TESA/Green ply in fill panels of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85-G with a wire of dia 0.56(Zero decimal Fifty six milimetres) for doors and windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm (Forty milimetres) 2nd class deodar wood, within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing fly proof M.S. wire gauge of S gauge designation 85 G with wire of dia 0.56mm to windows and clear story windows moulding 60x20mm (Sixty into Twenty millimetres) beeding or second class deodar wood within all leads and lifts and other inidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm(Three hundred into Sixteen milimetres) size anodized aluminum sliding door bolts make of PILOT/ SHEEL or equivalent anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) size aluminium anodized PILOT/ Sheel or equivalent handles anodized transparent or dyed to required colour and shade with necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium anodized PILOT/ Sheel or equivalent handles anodized transparent or dyed to required colour and shade with necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into ten milimetre) anodized aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into Ten milimetre) anodized aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) bright finished hard drawn hooks and eyes. Including carriage of matgerials win all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetre) oxidized M. S. single acting spring hinges wioth necessary screws etc. complete. Including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick /concrete/stone walls for interior plastering upto all floor level including arises , internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetre) in girth including drip course and grooves, finished even and smooth with cement mortar 1.6 (One cement isto Six sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick /concrete/stone walls for interior plastering upto all floor level including arises , internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetre) in girth including drip course and grooves, finished even and smooth with cement mortar 1.6 (One cement isto Six sand). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster with cement mortar 1:3 (One cement : three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth including drip course and grooves, finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling with cement mortar 1:4 (One cement : four sand) upto all floors level complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm to 25mm (Twenty into Twenty five milimetres) thick Kota stone single slab 55x55cm (Fifty five into fifty five centimetres) with round nosing in flooring laid over 20 mm (Twenty milimetres) (average) thick base of cement mortor 1:4 (1 cement : 4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, nosing and moulding complete upto all floors levels including entire carriage within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Kota stone slab 20mm to 25mm (Twenty into Twenty five milimetres) thick in step side risers of steps, skirting dado and pillars laid on 12 mm (Twelve milimetres) (average) thick cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including making noising rubbing and polishing complete including entire carriage within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

50mm (Fifty millimetres) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

20mm thick cement plaster skirting upto any heights with cement mortar 1:3 (One cement : Three Sand) finished with a floating coatg of neat cement including rounding of junctions for all floors level complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles 60cmx60cm (Sixty centimetres into Sixty centim,etres) thick in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles 30x60cm (Thirty into sixty centimetres) nominal side in grey/coloured of required shade in skirting risers of steps and dados on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying granite stone in flooring 10 to 20mm (Ten to Twenty millimetres) (average) thickness base of cement mortar 1:3 (One cement isto Three Sand) laid over and jointed with greay cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing nising/moulding in single or double layer complete 16mm (Sixteen millimetres) thick complete The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glass stip 40 mm (Forty millimetres) wide and 4 mm (Four millimetres) thick.in flooring and plinth protection complete including carriage of material within all leads, lifts and other incidentals, as per architect drawing , design and specification including all fitting etc as required/ desire by Engineer- in- charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing MS fan clamps type-I of 16mm (Sixteen millimetres) dia M.S. bars bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop all as per standard design complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two coats) with acrylic oli bound washable distemper with Dulux/Apex/Asian paint brand and manufactire and required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two coatgs (excluding priming coat) on new wood and wood based surfaces with enamel paint of Asian/Nerolac or its equivalent brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter enamel paint other than white, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new steel and other metal based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and required with wire brushes/ fine steel wool scrappers and sand papered complete with ready mixed priming paint brushing red lead oxide/ zinc oxide chrome complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats on new galvanised iron sheet with ready mixed paint of approved brand and manufacture on new work to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, with white/ grey/ green shade complete including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections trusses angle iron/tublar section and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees flat with conencting plates of angle cleats in main and cross beams, hips jack rafters, purlins connect to common rafters and the likeincluding carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick prepainted steel sheet of TATA Durashine/Sail/Jindal ISI marked-2-1201 in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet of TATA/Shakti for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing minimum 15cm (Fifteen centimeters) wide 45cm (Forty five centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet of TATA/Shakti for gutter with iron brackets 40x3mm (Forty into Three milimetres) size dume shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres ) dia bars in down bolts and nuts and washers etceteraetera including making necessary connections with rain water pipe complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50x6mm (Fifty into Six millimeter) flat iron section and ties complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. Sheet 1.66mm to 2mm (One point six six milimetre into Two milimetre) thick in eves board/facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face PVC accessories for rain water pipes including filling the4 joints with spun yarn soaked in neat cement slurry in cement mortar 1:2 (One cement : Two sand) providing and fixing M.S. round holding down bolts or anchor bolts with nuts and washer plates complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

PVC Plain bend 100mm dia

PVC Plain Shoe 100mm dia

Providing under layer for Plinth protection of 100 mm (One hundred milimetre) thick unconsolidated) bed of dry brick stone broken aggregate 40mm (Forty Milimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Plinth protection 50mm(Fifty milimetre) thick with cement concrete 1:3:6 (One cement isto Three sand isto Six graded stone aggregate 20mm (Twenty milimetre)nominal size including finishing the top surface of concrete smooth including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 800, 803, 1202 and 1203 in cement mortar 1:3:6 (One cement: three sand: Six graded broken/crushed stone aggregate 20mm (Twenty millimeters) nominal size PCC grade M-10 (M-ten) in foundation and plinth, retaining wall, drain and channel including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan seat No.20041 (Twenty thousand forty one) of Hindware and its equivalent with integral P or S trap including joisting the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work, bed concrete, foot rest and trap measured and paid for separately) Indian Universal closet, including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing sand cast iron iron 100mm size P or S trap for watrer closet (squatting pan) including jointing the trap with the Pan or soil oioe cement mortaer 1:1 (One cement : 1 Sand) complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten Litres) capacity P.V.C. (Poly Venyl Chloride) low level flushing cistern I.S. (Indian Standard) marked No.21028 (Twenty one thousand twenty eight) of Hindware or its equivalent with a pair of C.I. (Cast Iron) or M.S. (mild steel) brackets, with fittings such as lead valve less siphon, 15mm (Fifteen milimetre) nominal size brass ball valve with polythene float, C.P. (Chromium Plated) brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia (Forty milimetre) diameter C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 15mm (Fifteen millimetres) nominal bore mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor in all heights/ floor level, including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 20mm (Twenty millimetres) nominal bore mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor in all heights/ floor level, including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Provuiding and fixing 15mm nominal bore in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Making connection of galvanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm (Twenty milimetre to Forty milimetre) including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

PRovidingh and xixing water meter and stop cock in galvanised mild steel tube including necessary fillings such as mild steel galvanised jamb nut socket etcetera cuttingand making long screws compleet 15mm nominalbore (Water meter and stop cock to be measured and paid for separately) including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cemetn mortar 1:5 (1 cement: 5 sand) C.I. cover with frame (light duty) 355mm x 610mm intrnal diamensions total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement: 2 sand: 4 graded stone aggregte 20mm nominal size) foundation concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement: 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete inside diamensions 455mm x 610mm x 450mm deep single pipe line including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm nominal size PVC spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately) including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm nominal size PVC spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately) including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm nominal size PVC fitting and accessories bends if required degree (any radius) with oval access door insertion rubber washer 2mm thick bolts and nuts complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm nominal size PVC fitting and accessories bends if required degree (any radius) with oval access door insertion rubber washer 2mm thick bolts and nuts complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC fittings and accessories plain bend of required degree 75mm (Seventy five millimetres) nominal size including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC fittings and accessories plain bend of required degree 100mm nominal size.including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm nominal size PVC fittings asnd accessories collars including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm nominal size PVC fittings asnd accessories collars including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm nominal size PVC cowl including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 75mm nominal size lead caulked joints PVC pipes and fittings including testing of joints including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 100mm nominal size lead caulked jointgs sand cast iron/cast (spun) iron pipes and fittings including testing of joints including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and flootrs 75mm nominal diametre including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and flootrs 100mm nominal diametre including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm M.S. stay ad clamps for PVC uiron pipes complete including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing100mm M.S. stay ad clamps for PVCuiron pipes including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting chaase in stone/brick masonfry walls for fixing PVC pipes and fitting including making good the same with stone/brick work in cement mortar 1:3 (One cement : Three Sand) 75mm nominal size diameter including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting chaase in stone/brick masonfry walls for fixing sand cast iron/cast iron ipes and fitting including making good the same with stone/brick work in cement mortar 1:3 (One cement : Three Sand) 100mm (One hundred millimetres) nominal size diameter including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm nominal size C.P. grating for floor trap including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm nominal size C.P. grating for floor tap including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 455x610mm lighty duty rectangular C.I. manhole with frfame cover weight 38kg (Thirty eight kilograms) including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 200mm (TWo hundred millimetres) wide castg iron Rangs with chequerter or rubbed nos strip surface including fixing in manholes with 200mmx200mmx10mm (Two hundred millimetres into two hundred millimetres into ten millimetres) cement mortar 1:3:6 (One cement : Three sand : Six graded stone aggregtge 20mm (Twenty millimetres) nominal size including necessary fitting complete including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Karan Sharma

tek chand

Kulbir Kumar